* [PATCH v2 0/8] Allwinner: A523: add support for A523 THS0/1 controllers
@ 2025-07-03 14:20 iuncuim
0 siblings, 0 replies; 2+ messages in thread
From: iuncuim @ 2025-07-03 14:20 UTC (permalink / raw)
To: Srinivas Kandagatla, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland,
Vasily Khoruzhick, Yangtao Li, Rafael J . Wysocki, Daniel Lezcano,
Zhang Rui, Lukasz Luba, Philipp Zabel, Maxime Ripard, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel, linux-pm
From: Mikhail Kalashnikov <iuncuim@gmail.com>
This patch series adds temperature sensor support for the Allwinner A523
family of processors (same die with H728/A527/T527)
Changes:
1) dt-bindings: nvmem: SID: Add binding for A523 SID controller
- added new patch
2) dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
- changed clock order
- added additional nvmem cell with calibration data
- added requirements for new controllers
- added description
3) thermal/drivers/sun8i: add gpadc clock
- removed unnecessary call to clk_prepare_enable() since
devm_clk_get_enabled()includes this
4) thermal/drivers/sun8i: replace devm_reset_control_get to
- original function replaced with devm_reset_control_get_shared_deasserted()
- removed some of the repetitive code executed by
devm_reset_control_get_shared_deasserted()
5) thermal/drivers/sun8i: get calibration data from two nvmem cells
- added possibility to get calibration data from two independent cells
6) thermal/drivers/sun8i: Add support for A523 THS0/1 controllers
- removed magic digits
- changed description of calibration data procedure for A523
- changed numbers of array elements with calibration data
7) arm64: dts: allwinner: A523: Add SID controller node
- fix typo (sun50i->sun55i)
8) arm64: dts: allwinner: A523: Add thermal sensors and zones
- cell with calibration data divided into two
- added passive trips for gpu
- added information that information obtained from BSP
v1: https://lore.kernel.org/linux-sunxi/20250411003827.782544-1-iuncuim@gmail.com
Mikhail Kalashnikov (8):
dt-bindings: nvmem: SID: Add binding for A523 SID controller
dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
thermal/drivers/sun8i: add gpadc clock
thermal/drivers/sun8i: replace devm_reset_control_get to
devm_reset_control_get_shared_deasserted
thermal/drivers/sun8i: get calibration data from two nvmem cells
thermal/drivers/sun8i: Add support for A523 THS0/1 controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: A523: Add thermal sensors and zones
.../nvmem/allwinner,sun4i-a10-sid.yaml | 1 +
.../thermal/allwinner,sun8i-a83t-ths.yaml | 49 +++-
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 162 ++++++++++++
drivers/thermal/sun8i_thermal.c | 240 ++++++++++++++----
4 files changed, 406 insertions(+), 46 deletions(-)
--
2.49.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH v2 0/8] Allwinner: A523: add support for A523 THS0/1 controllers
@ 2025-07-03 15:11 iuncuim
0 siblings, 0 replies; 2+ messages in thread
From: iuncuim @ 2025-07-03 15:11 UTC (permalink / raw)
To: Srinivas Kandagatla, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland,
Vasily Khoruzhick, Yangtao Li, Rafael J . Wysocki, Daniel Lezcano,
Zhang Rui, Lukasz Luba, Philipp Zabel, Maxime Ripard, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel, linux-pm
From: Mikhail Kalashnikov <iuncuim@gmail.com>
This patch series adds temperature sensor support for the Allwinner A523
family of processors (same die with H728/A527/T527)
Changes:
1) dt-bindings: nvmem: SID: Add binding for A523 SID controller
- added new patch
2) dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
- changed clock order
- added additional nvmem cell with calibration data
- added requirements for new controllers
- added description
3) thermal/drivers/sun8i: add gpadc clock
- removed unnecessary call to clk_prepare_enable() since
devm_clk_get_enabled()includes this
4) thermal/drivers/sun8i: replace devm_reset_control_get to
- original function replaced with devm_reset_control_get_shared_deasserted()
- removed some of the repetitive code executed by
devm_reset_control_get_shared_deasserted()
5) thermal/drivers/sun8i: get calibration data from two nvmem cells
- added possibility to get calibration data from two independent cells
6) thermal/drivers/sun8i: Add support for A523 THS0/1 controllers
- removed magic digits
- changed description of calibration data procedure for A523
- changed numbers of array elements with calibration data
7) arm64: dts: allwinner: A523: Add SID controller node
- fix typo (sun50i->sun55i)
8) arm64: dts: allwinner: A523: Add thermal sensors and zones
- cell with calibration data divided into two
- added passive trips for gpu
- added information that information obtained from BSP
v1: https://lore.kernel.org/linux-sunxi/20250411003827.782544-1-iuncuim@gmail.com
Mikhail Kalashnikov (8):
dt-bindings: nvmem: SID: Add binding for A523 SID controller
dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers
thermal/drivers/sun8i: add gpadc clock
thermal/drivers/sun8i: replace devm_reset_control_get to
devm_reset_control_get_shared_deasserted
thermal/drivers/sun8i: get calibration data from two nvmem cells
thermal/drivers/sun8i: Add support for A523 THS0/1 controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: A523: Add thermal sensors and zones
.../nvmem/allwinner,sun4i-a10-sid.yaml | 1 +
.../thermal/allwinner,sun8i-a83t-ths.yaml | 49 +++-
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 162 ++++++++++++
drivers/thermal/sun8i_thermal.c | 240 ++++++++++++++----
4 files changed, 406 insertions(+), 46 deletions(-)
--
2.49.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-07-03 15:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-03 14:20 [PATCH v2 0/8] Allwinner: A523: add support for A523 THS0/1 controllers iuncuim
-- strict thread matches above, loose matches on Subject: below --
2025-07-03 15:11 iuncuim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).