From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH 4/7] i3c: mipi-i3c-hci: Add quirk to allow IBI while runtime suspended
Date: Thu, 29 Jan 2026 20:18:38 +0200 [thread overview]
Message-ID: <20260129181841.130864-5-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260129181841.130864-1-adrian.hunter@intel.com>
Some I3C controllers can be automatically runtime-resumed in order to
handle in-band interrupts (IBIs), meaning that runtime suspend does not
need to be blocked when IBIs are enabled.
For example, a PCI-attached controller in a low-power state may generate
a Power Management Event (PME) when the SDA line is pulled low to signal
the START condition of an IBI. The PCI subsystem will then runtime-resume
the device, allowing the IBI to be received without requiring the
controller to remain active.
Introduce a new quirk, HCI_QUIRK_RPM_IBI_ALLOWED, so that drivers can
opt-in to this capability via driver data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/i3c/master/mipi-i3c-hci/core.c | 3 +++
drivers/i3c/master/mipi-i3c-hci/hci.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index e925584113d1..ec4dbe64c35e 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -959,6 +959,9 @@ static int i3c_hci_probe(struct platform_device *pdev)
if (hci->quirks & HCI_QUIRK_RPM_ALLOWED)
i3c_hci_rpm_enable(&pdev->dev);
+ if (hci->quirks & HCI_QUIRK_RPM_IBI_ALLOWED)
+ hci->master.rpm_ibi_allowed = true;
+
return i3c_master_register(&hci->master, &pdev->dev, &i3c_hci_ops, false);
}
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index 6035f74212db..819328a85b84 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -146,6 +146,7 @@ struct i3c_hci_dev_data {
#define HCI_QUIRK_OD_PP_TIMING BIT(3) /* Set OD and PP timings for AMD platforms */
#define HCI_QUIRK_RESP_BUF_THLD BIT(4) /* Set resp buf thld to 0 for AMD platforms */
#define HCI_QUIRK_RPM_ALLOWED BIT(5) /* Runtime PM allowed */
+#define HCI_QUIRK_RPM_IBI_ALLOWED BIT(6) /* IBI and Hot-Join allowed while runtime suspended */
/* global functions */
void mipi_i3c_hci_resume(struct i3c_hci *hci);
--
2.51.0
next prev parent reply other threads:[~2026-01-29 18:19 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-29 18:18 [PATCH 0/7] i3c: mipi-i3c-hci-pci: Enable IBI while runtime suspended for Intel controllers Adrian Hunter
2026-01-29 18:18 ` [PATCH 1/7] i3c: mipi-i3c-hci-pci: Set d3hot_delay to 0 " Adrian Hunter
2026-01-29 19:43 ` Frank Li
2026-01-29 18:18 ` [PATCH 2/7] i3c: master: Allow controller drivers to select runtime PM device Adrian Hunter
2026-01-29 18:18 ` [PATCH 3/7] i3c: master: Mark last_busy on IBI when runtime PM is allowed Adrian Hunter
2026-01-29 19:56 ` Frank Li
2026-01-29 20:42 ` Adrian Hunter
2026-01-29 20:55 ` Frank Li
2026-01-30 7:48 ` Adrian Hunter
2026-01-29 18:18 ` Adrian Hunter [this message]
2026-01-29 18:18 ` [PATCH 5/7] i3c: mipi-i3c-hci: Allow parent to manage runtime PM Adrian Hunter
2026-01-29 20:00 ` Frank Li
2026-01-29 20:28 ` Adrian Hunter
2026-01-29 21:00 ` Frank Li
2026-01-30 7:00 ` Adrian Hunter
2026-01-30 15:04 ` Frank Li
2026-01-30 16:34 ` Adrian Hunter
2026-01-30 17:11 ` Frank Li
2026-02-02 16:25 ` Frank Li
2026-02-03 12:54 ` Adrian Hunter
2026-02-03 15:59 ` Frank Li
2026-02-03 16:22 ` Wysocki, Rafael J
2026-02-03 16:57 ` Adrian Hunter
2026-02-03 20:20 ` Rafael J. Wysocki
2026-01-29 18:18 ` [PATCH 6/7] i3c: mipi-i3c-hci-pci: Add optional ability to manage child " Adrian Hunter
2026-01-29 18:18 ` [PATCH 7/7] i3c: mipi-i3c-hci-pci: Enable IBI while runtime suspended for Intel controllers Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260129181841.130864-5-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox