Re: [PATCH v7 04/10] dt-bindings: soc: google: gs101-pmu: allow power domains as children

[Rob Herring <robh@kernel.org>]

On Fri, Mar 06, 2026 at 10:29:55AM +0000, André Draszik wrote:
> The power domains are a property of / implemented in the PMU. As such,
> they should be modelled as child nodes of the PMU.
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---
> v7:
> - really be consistent with quoting (Krzysztof)
> - drop invalid tested-by tag (Krzysztof)
> 
> v4:
> - consistent quoting using " (Krzysztof)
> - add samsung,dtzpc to example
> 
> Note:
> Because the properties added are 'required', this commit breaks DT
> validation of the existing DT for Pixel 6, but a) that's simply because
> the DT is incomplete and b) a DT update will be posted once the binding
> is accepted.
> It is not possible to write the binding such that it supports old
> (incomplete) DTs in addition to the full version, but as per above
> it's not required to keep supporting old DTs.

This information needs to go in the commit msg.

> ---
>  .../bindings/soc/google/google,gs101-pmu.yaml      | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> index a06bd8ec3c20..dfe6f87e5949 100644
> --- a/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> +++ b/Documentation/devicetree/bindings/soc/google/google,gs101-pmu.yaml
> @@ -16,6 +16,14 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges: true
> +
>    reboot-mode:
>      $ref: /schemas/power/reset/syscon-reboot-mode.yaml
>      type: object
> @@ -39,9 +47,23 @@ properties:
>      description:
>        Phandle to PMU interrupt generation interface.
>  
> +patternProperties:
> +  "^power-domain@[0-9a-f]+$":
> +    type: object
> +    description: Child node describing one power domain within the PMU
> +
> +    additionalProperties: true
> +
> +    properties:
> +      compatible:
> +        const: google,gs101-pd
> +
>  required:
>    - compatible
>    - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
>    - google,pmu-intr-gen-syscon
>  
>  additionalProperties: false
> @@ -51,6 +73,25 @@ examples:
>      system-controller@17460000 {
>          compatible = "google,gs101-pmu";
>          reg = <0x17460000 0x10000>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
>  
>          google,pmu-intr-gen-syscon = <&pmu_intr_gen>;
> +
> +        pd_g3d: power-domain@1e00 {
> +            compatible = "google,gs101-pd";
> +            reg = <0x1e00 0x80>;

I'm assuming 0x1e00 is an offset from 0x17460000. That's not what ranges 
says though. It says both addresses are in the same address space 
(system-controller@17460000 parent's address space). You need:

ranges = <0x0 0x17460000 0x10000>;


> +            #power-domain-cells = <0>;
> +            label = "g3d";
> +            samsung,dtzpc = <&pd_g3d>;
> +        };
> +
> +        power-domain@2000 {
> +            compatible = "google,gs101-pd";
> +            reg = <0x2000 0x80>;
> +            #power-domain-cells = <0>;
> +            power-domains = <&pd_g3d>;
> +            label = "embedded_g3d";
> +        };
>      };
> 
> -- 
> 2.53.0.473.g4a7958ca14-goog
>