From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
To: "Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/6] powercap: intel_rapl: Move primitive info to header for interface drivers
Date: Fri, 13 Mar 2026 11:53:29 -0700 [thread overview]
Message-ID: <20260313185333.2370733-4-sathyanarayanan.kuppuswamy@linux.intel.com> (raw)
In-Reply-To: <20260313185333.2370733-1-sathyanarayanan.kuppuswamy@linux.intel.com>
RAPL primitive information varies across different RAPL interfaces
(MSR, TPMI, MMIO). Keeping them in the common code adds no benefit, but
requires interface-specific handling logic and makes the common layer
unnecessarily complex.
Move the primitive info infrastructure to the shared header to allow
interface drivers to configure RAPL primitives. Specific changes:
1. Move struct rapl_primitive_info, enum unit_type, and
PRIMITIVE_INFO_INIT macro to intel_rapl.h.
2. Change the @rpi field in struct rapl_if_priv from void * to
struct rapl_primitive_info * to improve type safety and eliminate
unnecessary casts.
No functional changes. This is a preparatory refactoring to allow
interface drivers to supply their own RAPL primitive settings.
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
drivers/powercap/intel_rapl_common.c | 32 ++--------------------------
include/linux/intel_rapl.h | 32 ++++++++++++++++++++++++++--
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index fdcac4a173a8..d6c2819b1212 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -100,13 +100,6 @@
#define RAPL_EVENT_MASK GENMASK(7, 0)
-enum unit_type {
- ARBITRARY_UNIT, /* no translation */
- POWER_UNIT,
- ENERGY_UNIT,
- TIME_UNIT,
-};
-
static const char *pl_names[NR_POWER_LIMITS] = {
[POWER_LIMIT1] = "long_term",
[POWER_LIMIT2] = "short_term",
@@ -208,27 +201,6 @@ static const struct rapl_defaults *get_defaults(struct rapl_package *rp)
return rp->priv->defaults;
}
-/* per domain data. used to describe individual knobs such that access function
- * can be consolidated into one instead of many inline functions.
- */
-struct rapl_primitive_info {
- const char *name;
- u64 mask;
- int shift;
- enum rapl_domain_reg_id id;
- enum unit_type unit;
- u32 flag;
-};
-
-#define PRIMITIVE_INFO_INIT(p, m, s, i, u, f) { \
- .name = #p, \
- .mask = m, \
- .shift = s, \
- .id = i, \
- .unit = u, \
- .flag = f \
- }
-
static void rapl_init_domains(struct rapl_package *rp);
static int rapl_read_data_raw(struct rapl_domain *rd,
enum rapl_primitives prim,
@@ -748,10 +720,10 @@ static int rapl_config(struct rapl_package *rp)
/* MMIO I/F shares the same register layout as MSR registers */
case RAPL_IF_MMIO:
case RAPL_IF_MSR:
- rp->priv->rpi = (void *)rpi_msr;
+ rp->priv->rpi = rpi_msr;
break;
case RAPL_IF_TPMI:
- rp->priv->rpi = (void *)rpi_tpmi;
+ rp->priv->rpi = rpi_tpmi;
break;
default:
return -EINVAL;
diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h
index 9e6bd654be1f..01f290de3586 100644
--- a/include/linux/intel_rapl.h
+++ b/include/linux/intel_rapl.h
@@ -137,6 +137,34 @@ struct rapl_defaults {
bool spr_psys_bits;
};
+#define PRIMITIVE_INFO_INIT(p, m, s, i, u, f) { \
+ .name = #p, \
+ .mask = m, \
+ .shift = s, \
+ .id = i, \
+ .unit = u, \
+ .flag = f \
+ }
+
+enum unit_type {
+ ARBITRARY_UNIT, /* no translation */
+ POWER_UNIT,
+ ENERGY_UNIT,
+ TIME_UNIT,
+};
+
+/* per domain data. used to describe individual knobs such that access function
+ * can be consolidated into one instead of many inline functions.
+ */
+struct rapl_primitive_info {
+ const char *name;
+ u64 mask;
+ int shift;
+ enum rapl_domain_reg_id id;
+ enum unit_type unit;
+ u32 flag;
+};
+
/**
* struct rapl_if_priv: private data for different RAPL interfaces
* @control_type: Each RAPL interface must have its own powercap
@@ -152,7 +180,7 @@ struct rapl_defaults {
* @write_raw: Callback for writing RAPL interface specific
* registers.
* @defaults: pointer to default settings
- * @rpi: internal pointer to interface primitive info
+ * @rpi: pointer to interface primitive info
*/
struct rapl_if_priv {
enum rapl_if_type type;
@@ -164,7 +192,7 @@ struct rapl_if_priv {
int (*read_raw)(int id, struct reg_action *ra, bool pmu_ctx);
int (*write_raw)(int id, struct reg_action *ra);
const struct rapl_defaults *defaults;
- void *rpi;
+ struct rapl_primitive_info *rpi;
};
#ifdef CONFIG_PERF_EVENTS
--
2.43.0
next prev parent reply other threads:[~2026-03-13 18:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 18:53 [PATCH v1 0/6] powercap: intel_rapl: Move primitives to interface drivers Kuppuswamy Sathyanarayanan
2026-03-13 18:53 ` [PATCH v1 1/6] powercap: intel_rapl: Remove unused AVERAGE_POWER primitive Kuppuswamy Sathyanarayanan
2026-03-13 18:53 ` [PATCH v1 2/6] powercap: intel_rapl: Remove unused macro definitions Kuppuswamy Sathyanarayanan
2026-03-13 18:53 ` Kuppuswamy Sathyanarayanan [this message]
2026-03-13 18:53 ` [PATCH v1 4/6] powercap: intel_rapl: Move TPMI primitives to TPMI driver Kuppuswamy Sathyanarayanan
2026-03-13 18:53 ` [PATCH v1 5/6] thermal: intel: int340x: processor: Move MMIO primitives to MMIO driver Kuppuswamy Sathyanarayanan
2026-03-13 18:53 ` [PATCH v1 6/6] powercap: intel_rapl: Move MSR primitives to MSR driver Kuppuswamy Sathyanarayanan
2026-03-20 17:02 ` [PATCH v1 0/6] powercap: intel_rapl: Move primitives to interface drivers srinivas pandruvada
2026-03-20 18:10 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260313185333.2370733-4-sathyanarayanan.kuppuswamy@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox