[PATCH v4 0/4] SDM670 Basic SoC thermal zones

[PATCH v4 0/4] SDM670 Basic SoC thermal zones

[Richard Acayan]

This adds support for the thermal sensor, for thermal-based CPU
throttling via LMh, and for thermal zones.

Changes since v3 (https://lore.kernel.org/r/20260310002037.1863-1-mailingradian@gmail.com):
- support LMh clusters starting at CPU 6 (dt-bindings tag dropped) (3/4)

Changes since v2 (https://lore.kernel.org/r/20260304014530.27775-1-mailingradian@gmail.com):
- remove cooling from memory thermal zone (3/3)

Changes since v1 (https://lore.kernel.org/r/20260210021607.12576-1-mailingradian@gmail.com):
- add review tag from Krzysztof (1/3)
- replace CPU thermal zones with lmh (2/3, 3/3)

Richard Acayan (4):
  dt-bindings: thermal: tsens: add SDM670 compatible
  dt-bindings: thermal: lmh: Add SDM670 compatible
  thermal/qcom/lmh: support SDM670 and its CPU clusters
  arm64: dts: qcom: sdm670: add thermal zones and thermal devices

 .../devicetree/bindings/thermal/qcom-lmh.yaml |   3 +
 .../bindings/thermal/qcom-tsens.yaml          |   1 +
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 400 ++++++++++++++++++
 drivers/thermal/qcom/lmh.c                    |  69 ++-
 4 files changed, 460 insertions(+), 13 deletions(-)

-- 
2.53.0

[PATCH v4 1/4] dt-bindings: thermal: tsens: add SDM670 compatible

[Richard Acayan]

Add the compatible for the thermal sensors on the SDM670.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 3c5256b0cd9f..6c84f22ae322 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -71,6 +71,7 @@ properties:
               - qcom,sc8180x-tsens
               - qcom,sc8280xp-tsens
               - qcom,sdm630-tsens
+              - qcom,sdm670-tsens
               - qcom,sdm845-tsens
               - qcom,sm6115-tsens
               - qcom,sm6350-tsens
-- 
2.53.0

[PATCH v4 2/4] dt-bindings: thermal: lmh: Add SDM670 compatible

[Richard Acayan]

Document the SDM670 LMh.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
index 1175bb358382..ce72347e29d1 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@@ -22,6 +22,9 @@ properties:
           - qcom,sc8180x-lmh
           - qcom,sdm845-lmh
           - qcom,sm8150-lmh
+      - items:
+          - const: qcom,sdm670-lmh
+          - const: qcom,sdm845-lmh
       - items:
           - const: qcom,qcm2290-lmh
           - const: qcom,sm8150-lmh
-- 
2.53.0

[PATCH v4 3/4] thermal/qcom/lmh: support SDM670 and its CPU clusters

[Richard Acayan]

The LMh driver was made for Qualcomm SoCs with clusters of 4 CPUs, but
some SoCs divide the CPUs into different sizes of clusters. In SDM670,
the first 6 CPUs are in the little cluster and the next 2 are in the big
cluster. Define the clusters in the match data and define the different
cluster configuration for SDM670.

Currently, this only supports 8 CPUs and tolerates linking to any CPU in
the cluster.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 drivers/thermal/qcom/lmh.c | 69 +++++++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 13 deletions(-)

diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index 3d072b7a4a6d..46c1e301f6c8 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -30,14 +30,17 @@
 
 #define LMH_REG_DCVS_INTR_CLR		0x8
 
-#define LMH_ENABLE_ALGOS		1
-
 struct lmh_hw_data {
 	void __iomem *base;
 	struct irq_domain *domain;
 	int irq;
 };
 
+struct lmh_soc_data {
+	bool enable_algos;
+	u32 node_ids[8];
+};
+
 static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
 {
 	struct lmh_hw_data *lmh_data = data;
@@ -100,8 +103,8 @@ static int lmh_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct device_node *cpu_node;
 	struct lmh_hw_data *lmh_data;
+	const struct lmh_soc_data *match_data;
 	int temp_low, temp_high, temp_arm, cpu_id, ret;
-	unsigned int enable_alg;
 	u32 node_id;
 
 	if (!qcom_scm_is_available())
@@ -144,10 +147,9 @@ static int lmh_probe(struct platform_device *pdev)
 	 * for other platforms, revisit this to check if the <cpu-id, node-id> should be part
 	 * of a dt match table.
 	 */
-	if (cpu_id == 0) {
-		node_id = LMH_CLUSTER0_NODE_ID;
-	} else if (cpu_id == 4) {
-		node_id = LMH_CLUSTER1_NODE_ID;
+	match_data = of_device_get_match_data(dev);
+	if (cpu_id >= 0 && cpu_id < 8) {
+		node_id = match_data->node_ids[cpu_id];
 	} else {
 		dev_err(dev, "Wrong CPU id associated with LMh node\n");
 		return -EINVAL;
@@ -156,9 +158,7 @@ static int lmh_probe(struct platform_device *pdev)
 	if (!qcom_scm_lmh_dcvsh_available())
 		return -EINVAL;
 
-	enable_alg = (uintptr_t)of_device_get_match_data(dev);
-
-	if (enable_alg) {
+	if (match_data->enable_algos) {
 		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
 					 LMH_NODE_DCVS, node_id, 0);
 		if (ret)
@@ -231,10 +231,53 @@ static int lmh_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct lmh_soc_data sdm670_lmh_data = {
+	.enable_algos = true,
+	.node_ids = {
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+	},
+};
+
+static const struct lmh_soc_data sdm845_lmh_data = {
+	.enable_algos = true,
+	.node_ids = {
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+	},
+};
+
+static const struct lmh_soc_data sm8150_lmh_data = {
+	.enable_algos = false,
+	.node_ids = {
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER0_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+		LMH_CLUSTER1_NODE_ID,
+	},
+};
+
 static const struct of_device_id lmh_table[] = {
-	{ .compatible = "qcom,sc8180x-lmh", },
-	{ .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS},
-	{ .compatible = "qcom,sm8150-lmh", },
+	{ .compatible = "qcom,sc8180x-lmh", .data = &sm8150_lmh_data },
+	{ .compatible = "qcom,sdm670-lmh", .data = &sdm670_lmh_data },
+	{ .compatible = "qcom,sdm845-lmh", .data = &sdm845_lmh_data },
+	{ .compatible = "qcom,sm8150-lmh", .data = &sm8150_lmh_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, lmh_table);
-- 
2.53.0

[PATCH v4 4/4] arm64: dts: qcom: sdm670: add thermal zones and thermal devices

[Richard Acayan]

Add thermal zones to safeguard from overheating to high temperatures,
along with the thermal sensors (TSENS) and CPU frequency limits (LMh).
The temperatures are very high, but should still be safeguard for
devices that do not specify their own thermal zones.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 400 +++++++++++++++++++++++++++
 1 file changed, 400 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index f115bc6e64f3..c5f7655421a3 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -62,6 +63,7 @@ cpu0: cpu@0 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_0>;
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -89,6 +91,7 @@ cpu1: cpu@100 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_100>;
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -111,6 +114,7 @@ cpu2: cpu@200 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_200>;
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -133,6 +137,7 @@ cpu3: cpu@300 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_300>;
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -155,6 +160,7 @@ cpu4: cpu@400 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd4>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_400>;
 			l2_400: l2-cache {
 				compatible = "cache";
@@ -177,6 +183,7 @@ cpu5: cpu@500 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd5>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_500>;
 			l2_500: l2-cache {
 				compatible = "cache";
@@ -199,6 +206,7 @@ cpu6: cpu@600 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_600>;
 			l2_600: l2-cache {
 				compatible = "cache";
@@ -221,6 +229,7 @@ cpu7: cpu@700 {
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
+			#cooling-cells = <2>;
 			next-level-cache = <&l2_700>;
 			l2_700: l2-cache {
 				compatible = "cache";
@@ -1408,6 +1417,8 @@ gpu: gpu@5000000 {
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			gpu_zap_shader: zap-shader {
@@ -2100,6 +2111,28 @@ dispcc: clock-controller@af00000 {
 			#power-domain-cells = <1>;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm670-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1000>,
+			      <0 0x0c222000 0 0x1000>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 28 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <13>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm670-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1000>,
+			      <0 0x0c223000 0 0x1000>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 29 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <8>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -2289,5 +2322,372 @@ cpufreq_hw: cpufreq@17d43000 {
 
 			#freq-domain-cells = <1>;
 		};
+
+		lmh_cluster1: lmh@17d70800 {
+			compatible = "qcom,sdm670-lmh", "qcom,sdm845-lmh";
+			reg = <0 0x17d70800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&cpu6>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@17d78800 {
+			compatible = "qcom,sdm670-lmh", "qcom,sdm845-lmh";
+			reg = <0 0x17d78800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&cpu0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				q6_modem_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				mem_crit: trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				wlan_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				video_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_crit: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
-- 
2.53.0

Re: [PATCH v4 2/4] dt-bindings: thermal: lmh: Add SDM670 compatible

[Krzysztof Kozlowski]

On Fri, Mar 27, 2026 at 09:40:39PM -0400, Richard Acayan wrote:
> Document the SDM670 LMh.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>

Why are you sending patches already applied 18 days ago?

Best regards,
Krzysztof

Re: [PATCH v4 2/4] dt-bindings: thermal: lmh: Add SDM670 compatible

[Richard Acayan]

On Sat, Mar 28, 2026 at 01:20:43PM +0100, Krzysztof Kozlowski wrote:
> On Fri, Mar 27, 2026 at 09:40:39PM -0400, Richard Acayan wrote:
> > Document the SDM670 LMh.
> > 
> > Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> 
> Why are you sending patches already applied 18 days ago?

This one in particular was applied with the assumption that there were
no driver changes to support SDM670, so I re-sent it in case the
different CPU clusters change the suitability of the fallback
compatible.

I'll drop them next time, and patch over this if necessary.

Re: [PATCH v4 3/4] thermal/qcom/lmh: support SDM670 and its CPU clusters

[Dmitry Baryshkov]

On Fri, Mar 27, 2026 at 09:40:40PM -0400, Richard Acayan wrote:
> The LMh driver was made for Qualcomm SoCs with clusters of 4 CPUs, but
> some SoCs divide the CPUs into different sizes of clusters. In SDM670,
> the first 6 CPUs are in the little cluster and the next 2 are in the big
> cluster. Define the clusters in the match data and define the different
> cluster configuration for SDM670.
> 
> Currently, this only supports 8 CPUs and tolerates linking to any CPU in
> the cluster.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>  drivers/thermal/qcom/lmh.c | 69 +++++++++++++++++++++++++++++++-------
>  1 file changed, 56 insertions(+), 13 deletions(-)
> 
> +static const struct lmh_soc_data sdm670_lmh_data = {
> +	.enable_algos = true,
> +	.node_ids = {
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +	},
> +};
> +
> +static const struct lmh_soc_data sdm845_lmh_data = {
> +	.enable_algos = true,
> +	.node_ids = {
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +	},
> +};

These tables made me wonder, can we determine this information from the
DT? For example, by reading the qcom,freq-domain property. But...

> +
> +static const struct lmh_soc_data sm8150_lmh_data = {
> +	.enable_algos = false,
> +	.node_ids = {
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER0_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +		LMH_CLUSTER1_NODE_ID,
> +	},
> +};

... this might be problematic, unless this entry is broken. On SM8150 we
have three freq domains, but up to now we were programming two clustern
nodes. Of course it is possible to define that node_id is 0 for freq
domain 0 and 1 for domains 1 and 2.

> +
>  static const struct of_device_id lmh_table[] = {
> -	{ .compatible = "qcom,sc8180x-lmh", },
> -	{ .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS},
> -	{ .compatible = "qcom,sm8150-lmh", },
> +	{ .compatible = "qcom,sc8180x-lmh", .data = &sm8150_lmh_data },
> +	{ .compatible = "qcom,sdm670-lmh", .data = &sdm670_lmh_data },
> +	{ .compatible = "qcom,sdm845-lmh", .data = &sdm845_lmh_data },
> +	{ .compatible = "qcom,sm8150-lmh", .data = &sm8150_lmh_data },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, lmh_table);
> -- 
> 2.53.0
> 

-- 
With best wishes
Dmitry