[PATCH v2 0/5] s390/idle: CPU idle driver

[PATCH v2 0/5] s390/idle: CPU idle driver

[Mete Durlu]

v1 -> v2:

* Add idle driver enteries to MAINTAINERS file (Christian Loehle)
* Remove extra line break left in drivers/cpuidle/Kconfig.s390
  (Christian Loehle)

This patch series introduces a CPU idle driver for s390
architecture that leverages the existing cpu idle infrastructure and
TEO (Timer Events Oriented) governor to optimize idle state selection
based on timer events and interrupt patterns.

- Implementation Overview
-----------------------------------------------------------------------

The driver implements two idle states;

**Polling Idle (shallow state)**
- Busy-loop implementation that prevents SIE-exit during short idle periods
- Zero exit latency, optimized for latency-sensitive workloads
- Maintains CPU with the guest, improving response times

**Enabled Wait (deep state)**
- Traditional EW state that signals hypervisor availability
- Higher exit latency but more efficient for longer idle periods

The TEO governor dynamically selects between these states by monitoring
next timer interrupts and system interrupt frequency, choosing the most
appropriate idle state for each situation.

- Performance Benefits
-----------------------------------------------------------------------

Benchmark results across LPAR, KVM, and z/VM guests demonstrate significant
improvements for latency-sensitive and scheduler-intensive workloads:

```
Benchmark    | LPAR  | z/VM  | KVM   |
-----------------------------------------
cyclictest   | +45%  | +50%  | +30%  |
hackbench    | +5%   | +12%  | -     |
pgbench      | +2%   | +15%  | +2%   |
uperf        | +50%* | +-5%  | +-5%  |
```

*Single-threaded uperf scenarios show 50-70% improvements on LPAR.
Multi-threaded results show slight improvements overall.

Additionally, fio and ioping tests show latency distribution shifts toward
lower values with reduced minimum and average latencies.

- Configuration
-----------------------------------------------------------------------

Idle state parameters are tuned per hypervisor type after benchmarks:

**LPAR:**
- Polling: 5us target residency, 0us exit latency
- EW: 5us target residency, 5us exit latency

**KVM/z/VM:**
- Polling: 1us target residency, 0us exit latency
- EW: 1us target residency, 1us exit latency

---
Mete Durlu (5):
      s390/tick: Remove CIF_NOHZ_DELAY flag
      tick: Remove arch_needs_cpu
      s390: Enable TIF_POLLING_NRFLAG
      s390/idle: Introduce cpuidle for s390
      s390/configs: Enable cpuidle driver on s390

 MAINTAINERS                         |   8 +++
 arch/s390/Kconfig                   |   5 ++
 arch/s390/configs/debug_defconfig   |   2 +
 arch/s390/configs/defconfig         |   2 +
 arch/s390/include/asm/processor.h   |   4 --
 arch/s390/include/asm/thread_info.h |   1 +
 arch/s390/kernel/idle.c             |   1 -
 arch/s390/kernel/irq.c              |   4 --
 arch/s390/kernel/smp.c              |   1 -
 drivers/cpuidle/Kconfig             |   5 ++
 drivers/cpuidle/Kconfig.s390        |  11 ++++
 drivers/cpuidle/Makefile            |   4 ++
 drivers/cpuidle/cpuidle-s390.c      | 104 ++++++++++++++++++++++++++++++++++++
 include/linux/tick.h                |   3 --
 kernel/time/tick-sched.c            |   7 ++-
 15 files changed, 145 insertions(+), 17 deletions(-)
---
base-commit: 2d3090a8aeb596a26935db0955d46c9a5db5c6ce
change-id: 20260609-idledriver-217e2b2712a3

Best regards,
-- 
Mete Durlu <meted@linux.ibm.com>

[PATCH v2 1/5] s390/tick: Remove CIF_NOHZ_DELAY flag

[Mete Durlu]

Remove obsolete tick delay heuristic [1]. The upcoming cpuidle driver
handles frequent sleep/wakeup cycles more effectively.

[1] https://lore.kernel.org/all/20090929122533.402715150@de.ibm.com/

Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
---
 arch/s390/include/asm/processor.h | 4 ----
 arch/s390/kernel/idle.c           | 1 -
 arch/s390/kernel/irq.c            | 4 ----
 arch/s390/kernel/smp.c            | 1 -
 4 files changed, 10 deletions(-)

diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 78195ee5e99f..3666198cc364 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,12 +14,10 @@
 
 #include <linux/bits.h>
 
-#define CIF_NOHZ_DELAY		2	/* delay HZ disable for a tick */
 #define CIF_ENABLED_WAIT	5	/* in enabled wait state */
 #define CIF_MCCK_GUEST		6	/* machine check happening in guest */
 #define CIF_DEDICATED_CPU	7	/* this CPU is dedicated */
 
-#define _CIF_NOHZ_DELAY		BIT(CIF_NOHZ_DELAY)
 #define _CIF_ENABLED_WAIT	BIT(CIF_ENABLED_WAIT)
 #define _CIF_MCCK_GUEST		BIT(CIF_MCCK_GUEST)
 #define _CIF_DEDICATED_CPU	BIT(CIF_DEDICATED_CPU)
@@ -96,8 +94,6 @@ static __always_inline bool test_cpu_flag_of(int flag, int cpu)
 	return test_bit(flag, &per_cpu(pcpu_devices, cpu).flags);
 }
 
-#define arch_needs_cpu() test_cpu_flag(CIF_NOHZ_DELAY)
-
 static inline void get_cpu_id(struct cpuid *ptr)
 {
 	asm volatile("stidp %0" : "=Q" (*ptr));
diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c
index 1f1b06b6b4ef..8c63f440da2e 100644
--- a/arch/s390/kernel/idle.c
+++ b/arch/s390/kernel/idle.c
@@ -42,7 +42,6 @@ void noinstr arch_cpu_idle(void)
 	/* Wait for external, I/O or machine check interrupt. */
 	psw_mask = PSW_KERNEL_BITS | PSW_MASK_WAIT |
 		   PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
-	clear_cpu_flag(CIF_NOHZ_DELAY);
 	set_cpu_flag(CIF_ENABLED_WAIT);
 	if (smp_cpu_mtid)
 		stcctm(MT_DIAG, smp_cpu_mtid, (u64 *)&idle->mt_cycles_enter);
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index d10a17e6531d..61d17954c34c 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -161,7 +161,6 @@ void noinstr do_io_irq(struct pt_regs *regs)
 	if (from_idle)
 		account_idle_time_irq();
 
-	set_cpu_flag(CIF_NOHZ_DELAY);
 	do {
 		regs->tpi_info = get_lowcore()->tpi_info;
 		if (get_lowcore()->tpi_info.adapter_IO)
@@ -358,9 +357,6 @@ static irqreturn_t do_ext_interrupt(int irq, void *dummy)
 	int index;
 
 	ext_code.int_code = regs->int_code;
-	if (ext_code.code != EXT_IRQ_CLK_COMP)
-		set_cpu_flag(CIF_NOHZ_DELAY);
-
 	index = ext_hash(ext_code.code);
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 50bb499cf3e5..cd5ccbe3a18d 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -910,7 +910,6 @@ int __cpu_disable(void)
 	cregs[6].val  &= ~0xff000000UL;	/* disable all I/O interrupts */
 	cregs[14].val &= ~0x1f000000UL;	/* disable most machine checks */
 	__local_ctl_load(0, 15, cregs);
-	clear_cpu_flag(CIF_NOHZ_DELAY);
 	return 0;
 }
 

-- 
2.54.0

[PATCH v2 2/5] tick: Remove arch_needs_cpu

[Mete Durlu]

Remove unused arch_needs_cpu() hook. No architectures use it after
s390 removed its use case.

Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
---
 include/linux/tick.h     | 3 ---
 kernel/time/tick-sched.c | 7 +++----
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/include/linux/tick.h b/include/linux/tick.h
index 738007d6f577..0f6757f81839 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -44,9 +44,6 @@ static inline void tick_unfreeze(void) { }
 
 #ifdef CONFIG_TICK_ONESHOT
 extern void tick_irq_enter(void);
-#  ifndef arch_needs_cpu
-#   define arch_needs_cpu() (0)
-#  endif
 # else
 static inline void tick_irq_enter(void) { }
 #endif
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index cbbb87a0c6e7..cee18999d818 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -943,8 +943,7 @@ static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
 	ts->timer_expires_base = basemono;
 
 	/*
-	 * Keep the periodic tick, when RCU, architecture or irq_work
-	 * requests it.
+	 * Keep the periodic tick, when RCU or irq_work requests it.
 	 * Aside of that, check whether the local timer softirq is
 	 * pending. If so, its a bad idea to call get_next_timer_interrupt(),
 	 * because there is an already expired timer, so it will request
@@ -952,8 +951,8 @@ static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
 	 * minimal delta, which brings us back to this place
 	 * immediately. Lather, rinse and repeat...
 	 */
-	if (rcu_needs_cpu() || arch_needs_cpu() ||
-	    irq_work_needs_cpu() || local_timer_softirq_pending()) {
+	if (rcu_needs_cpu() || irq_work_needs_cpu() ||
+	    local_timer_softirq_pending()) {
 		next_tick = basemono + TICK_NSEC;
 	} else {
 		/*

-- 
2.54.0

[PATCH v2 3/5] s390: Enable TIF_POLLING_NRFLAG

[Mete Durlu]

Enable TIF_POLLING_NRFLAG to support idle polling state in the
upcoming cpuidle driver.

Signed-off-by: Mete Durlu <meted@linux.ibm.com>
---
 arch/s390/include/asm/thread_info.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 6a548a819400..2554cef3a6a5 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,6 +61,7 @@ void arch_setup_new_exec(void);
  */
 #define HAVE_TIF_NEED_RESCHED_LAZY
 #define HAVE_TIF_RESTORE_SIGMASK
+#define HAVE_TIF_POLLING_NRFLAG
 
 #include <asm-generic/thread_info_tif.h>
 

-- 
2.54.0

[PATCH v2 4/5] s390/idle: Introduce cpuidle for s390

[Mete Durlu]

Introduce generic cpuidle driver on s390. Use a two stage approach to
handle idle scenarios and use TEO governor for idle stage selection.
Two stages are, from shallow to deep, idle polling and enabled wait.

Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
---
 MAINTAINERS                    |   8 ++++
 arch/s390/Kconfig              |   5 ++
 drivers/cpuidle/Kconfig        |   5 ++
 drivers/cpuidle/Kconfig.s390   |  11 +++++
 drivers/cpuidle/Makefile       |   4 ++
 drivers/cpuidle/cpuidle-s390.c | 104 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 137 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e035a3be797c..127e32c5fb4e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6766,6 +6766,13 @@ L:	linux-riscv@lists.infradead.org
 S:	Maintained
 F:	drivers/cpuidle/cpuidle-riscv-sbi.c
 
+CPUIDLE DRIVER - S390
+M:	Mete Durlu <meted@linux.ibm.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-s390@vger.kernel.org
+S:	Maintained
+F:	drivers/cpuidle/cpuidle-s390.c
+
 CPUMASK API [RUST]
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 R:	Yury Norov <yury.norov@gmail.com>
@@ -23497,6 +23504,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git
 F:	Documentation/driver-api/s390-drivers.rst
 F:	Documentation/arch/s390/
 F:	arch/s390/
+F:	drivers/cpuidle/cpuidle-s390.c
 F:	drivers/s390/
 F:	drivers/watchdog/diag288_wdt.c
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index ecbcbb781e40..8548f5b6b247 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -20,6 +20,9 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
 
+config ARCH_HAS_CPU_RELAX
+	def_bool y
+
 config GENERIC_HWEIGHT
 	def_bool !HAVE_MARCH_Z196_FEATURES
 
@@ -708,6 +711,8 @@ config KERNEL_IMAGE_BASE
 
 endmenu
 
+source "drivers/cpuidle/Kconfig"
+
 menu "Memory setup"
 
 config ARCH_SPARSEMEM_ENABLE
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index d6d8386d3f02..00e2562041fd 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -71,6 +71,11 @@ depends on RISCV
 source "drivers/cpuidle/Kconfig.riscv"
 endmenu
 
+menu "S390 CPU Idle Drivers"
+depends on S390
+source "drivers/cpuidle/Kconfig.s390"
+endmenu
+
 config HALTPOLL_CPUIDLE
 	tristate "Halt poll cpuidle driver"
 	depends on X86 && KVM_GUEST
diff --git a/drivers/cpuidle/Kconfig.s390 b/drivers/cpuidle/Kconfig.s390
new file mode 100644
index 000000000000..0b170d9a190b
--- /dev/null
+++ b/drivers/cpuidle/Kconfig.s390
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# S390 CPU Idle drivers
+#
+
+config S390_CPUIDLE
+	bool "S390 CPU idle driver"
+	default y
+	help
+          Select this option to enable processor idle state management
+          through cpuidle subsystem.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 1de9e92c5b0f..88cbc2a7aea8 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -42,3 +42,7 @@ obj-$(CONFIG_POWERNV_CPUIDLE)		+= cpuidle-powernv.o
 ###############################################################################
 # RISC-V drivers
 obj-$(CONFIG_RISCV_SBI_CPUIDLE)		+= cpuidle-riscv-sbi.o
+
+###############################################################################
+# S390 drivers
+obj-$(CONFIG_S390_CPUIDLE)		+= cpuidle-s390.o
diff --git a/drivers/cpuidle/cpuidle-s390.c b/drivers/cpuidle/cpuidle-s390.c
new file mode 100644
index 000000000000..58b738ea0150
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-s390.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * s390 generic CPU idle driver.
+ *
+ * Copyright IBM Corp. 2026
+ */
+
+#define pr_fmt(fmt) "CPUidle s390: " fmt
+
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+#include <linux/sched/clock.h>
+
+static __cpuidle int s390_enter_idle(struct cpuidle_device *dev,
+				     struct cpuidle_driver *drv,
+				     int index)
+{
+	arch_cpu_idle();
+	return index;
+}
+
+static struct cpuidle_driver s390_cpuidle_driver = {
+	.cpumask = (struct cpumask *)cpu_present_mask,
+	.name = "s390-idle",
+	.governor = "teo",
+	.states = {
+		{ /* entry 0 is for polling */},
+		{
+			.enter			= s390_enter_idle,
+			.name			= "IDLE",
+			.desc			= "ENABLED WAIT",
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 2,
+};
+
+static int s390_cpuidle_cpu_online(unsigned int cpu)
+{
+	struct cpuidle_device *dev = &per_cpu(cpuidle_dev, cpu);
+	int rc;
+
+	if (dev->registered) {
+		cpuidle_pause_and_lock();
+		rc = cpuidle_enable_device(dev);
+		cpuidle_resume_and_unlock();
+		if (rc)
+			pr_err("Failed to enable cpuidle device on cpu %u\n", cpu);
+	} else {
+		dev->cpu = cpu;
+		rc = cpuidle_register_device(dev);
+		if (rc)
+			pr_err("Failed to register cpuidle driver on cpu %u\n", cpu);
+	}
+	return rc;
+}
+
+static int s390_cpuidle_cpu_dead(unsigned int cpu)
+{
+	struct cpuidle_device *dev = &per_cpu(cpuidle_dev, cpu);
+
+	if (!dev->registered)
+		return 0;
+	cpuidle_pause_and_lock();
+	cpuidle_disable_device(dev);
+	cpuidle_resume_and_unlock();
+	return 0;
+}
+
+static void __init s390_cpuidle_ew_tune(void)
+{
+	struct cpuidle_state *state = &s390_cpuidle_driver.states[1];
+
+	if (machine_is_lpar()) {
+		state->target_residency = 5;
+		state->exit_latency = 5;
+	} else {
+		state->target_residency = 1;
+		state->exit_latency = 1;
+	}
+}
+
+static int __init s390_cpuidle_init(void)
+{
+	int rc;
+
+	s390_cpuidle_ew_tune();
+	cpuidle_poll_state_init(&s390_cpuidle_driver);
+	rc = cpuidle_register(&s390_cpuidle_driver, NULL);
+	if (rc)
+		return rc;
+	rc = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+				       "cpuidle/s390:online",
+				       s390_cpuidle_cpu_online,
+				       s390_cpuidle_cpu_dead);
+	if (rc < 0) {
+		cpuidle_unregister(&s390_cpuidle_driver);
+		pr_err("Failed to allocate hotplug state: cpuidle/s390:online\n");
+		return rc;
+	}
+	return 0;
+}
+device_initcall(s390_cpuidle_init);

-- 
2.54.0

[PATCH v2 5/5] s390/configs: Enable cpuidle driver on s390

[Mete Durlu]

Enable cpuidle infrastructure, teo governor and s390 cpuidle driver by
default. They can be disabled via config options before compile or via
setting cpuidle.off kernel commandline option. When cpuidle.off=1 set,
given architecture's specific implementation is used as a fallback without
any governor or idle state support.

During runtime individual states of cpuidle driver can also be disabled
via sysfs attributes.

Ex:
echo 1 > /sys/devices/system/cpu<N>/cpuidle/state<M>/disable

Signed-off-by: Mete Durlu <meted@linux.ibm.com>
---
 arch/s390/configs/debug_defconfig | 2 ++
 arch/s390/configs/defconfig       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 730c90b4a876..39f2c56bd29d 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -29,6 +29,8 @@ CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_TEO=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index dd5fc1426c88..723ce48ce8d1 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -27,6 +27,8 @@ CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_RDMA=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_TEO=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y

-- 
2.54.0

Re: [PATCH v2 0/5] s390/idle: CPU idle driver

[Heiko Carstens]

On Tue, Jun 09, 2026 at 03:24:20PM +0200, Mete Durlu wrote:
> v1 -> v2:
> 
> * Add idle driver enteries to MAINTAINERS file (Christian Loehle)
> * Remove extra line break left in drivers/cpuidle/Kconfig.s390
>   (Christian Loehle)
> 
> This patch series introduces a CPU idle driver for s390
> architecture that leverages the existing cpu idle infrastructure and
> TEO (Timer Events Oriented) governor to optimize idle state selection
> based on timer events and interrupt patterns.
...

> Mete Durlu (5):
>       s390/tick: Remove CIF_NOHZ_DELAY flag
>       tick: Remove arch_needs_cpu
>       s390: Enable TIF_POLLING_NRFLAG
>       s390/idle: Introduce cpuidle for s390
>       s390/configs: Enable cpuidle driver on s390
> 
>  MAINTAINERS                         |   8 +++
>  arch/s390/Kconfig                   |   5 ++
>  arch/s390/configs/debug_defconfig   |   2 +
>  arch/s390/configs/defconfig         |   2 +
>  arch/s390/include/asm/processor.h   |   4 --
>  arch/s390/include/asm/thread_info.h |   1 +
>  arch/s390/kernel/idle.c             |   1 -
>  arch/s390/kernel/irq.c              |   4 --
>  arch/s390/kernel/smp.c              |   1 -
>  drivers/cpuidle/Kconfig             |   5 ++
>  drivers/cpuidle/Kconfig.s390        |  11 ++++
>  drivers/cpuidle/Makefile            |   4 ++
>  drivers/cpuidle/cpuidle-s390.c      | 104 ++++++++++++++++++++++++++++++++++++
>  include/linux/tick.h                |   3 --
>  kernel/time/tick-sched.c            |   7 ++-
>  15 files changed, 145 insertions(+), 17 deletions(-)

Looks all good to me.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>

Re: [PATCH v2 2/5] tick: Remove arch_needs_cpu

[Thomas Gleixner]

On Tue, Jun 09 2026 at 15:24, Mete Durlu wrote:
> Remove unused arch_needs_cpu() hook. No architectures use it after
> s390 removed its use case.
>
> Suggested-by: Heiko Carstens <hca@linux.ibm.com>
> Signed-off-by: Mete Durlu <meted@linux.ibm.com>

Reviewed-by: Thomas Gleixner <tglx@kernel.org>