From: Adi Nata <adinata.softwareengineer@gmail.com>
To: rafael@kernel.org
Cc: linux-kernel-mentees@lists.linux.dev,
Adi Nata <adinata.softwareengineer@gmail.com>,
Pavel Machek <pavel@kernel.org>, Len Brown <lenb@kernel.org>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] PM: hibernate: Mark undocumented snapshot helpers as non-kernel-doc
Date: Wed, 10 Jun 2026 07:16:26 +0800 [thread overview]
Message-ID: <20260609231626.38839-1-adinata.softwareengineer@gmail.com> (raw)
Several helpers in snapshot.c are introduced with kernel-doc (/**)
comment blocks but do not describe their parameters with @param
tags.This emits warnings when building
with extra warnings enabled (make W=1), for example:
kernel/power/snapshot.c:469: warning: Function parameter or member
'zone' not described in 'add_rtree_block'
kernel/power/snapshot.c:469: warning: Function parameter or member
'gfp_mask' not described in 'add_rtree_block'
kernel/power/snapshot.c:469: warning: Function parameter or member
'safe_needed' not described in 'add_rtree_block'
kernel/power/snapshot.c:469: warning: Function parameter or member
'ca' not described in 'add_rtree_block'
These are file-local implementation details, not part of the
exported kernel API documented under Documentation/. Replace the
kernel-doc markers with plain block comments for the affected
functions.
Properly documented symbols such as
alloc_rtree_node(), snapshot_read_next() and snapshot_write_next()
remain unchanged.
Signed-off-by: Adi Nata <adinata.softwareengineer@gmail.com>
---
kernel/power/snapshot.c | 42 ++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index a564650734dc..552958f58359 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -458,7 +458,7 @@ static struct rtree_node *alloc_rtree_node(gfp_t gfp_mask, int safe_needed,
return node;
}
-/**
+/*
* add_rtree_block - Add a new leave node to the radix tree.
*
* The leave nodes need to be allocated in order to keep the leaves
@@ -528,7 +528,7 @@ static int add_rtree_block(struct mem_zone_bm_rtree *zone, gfp_t gfp_mask,
static void free_zone_bm_rtree(struct mem_zone_bm_rtree *zone,
int clear_nosave_free);
-/**
+/*
* create_zone_bm_rtree - Create a radix tree for one zone.
*
* Allocated the mem_zone_bm_rtree structure and initializes it.
@@ -566,7 +566,7 @@ static struct mem_zone_bm_rtree *create_zone_bm_rtree(gfp_t gfp_mask,
return zone;
}
-/**
+/*
* free_zone_bm_rtree - Free the memory of the radix tree.
*
* Free all node pages of the radix tree. The mem_zone_bm_rtree
@@ -678,7 +678,7 @@ static int create_mem_extents(struct list_head *list, gfp_t gfp_mask)
return 0;
}
-/**
+/*
* memory_bm_create - Allocate memory for a memory bitmap.
*/
static int memory_bm_create(struct memory_bitmap *bm, gfp_t gfp_mask,
@@ -720,7 +720,7 @@ static int memory_bm_create(struct memory_bitmap *bm, gfp_t gfp_mask,
goto Exit;
}
-/**
+/*
* memory_bm_free - Free memory occupied by the memory bitmap.
* @bm: Memory bitmap.
*/
@@ -736,7 +736,7 @@ static void memory_bm_free(struct memory_bitmap *bm, int clear_nosave_free)
INIT_LIST_HEAD(&bm->zones);
}
-/**
+/*
* memory_bm_find_bit - Find the bit for a given PFN in a memory bitmap.
*
* Find the bit in memory bitmap @bm that corresponds to the given PFN.
@@ -988,7 +988,7 @@ static void memory_bm_recycle(struct memory_bitmap *bm)
}
}
-/**
+/*
* register_nosave_region - Register a region of unsaveable memory.
*
* Register a range of page frames the contents of which should not be saved
@@ -1305,7 +1305,7 @@ static unsigned int count_free_highmem_pages(void)
return cnt;
}
-/**
+/*
* saveable_highmem_page - Check if a highmem page is saveable.
*
* Determine whether a highmem page should be included in a hibernation image.
@@ -1362,7 +1362,7 @@ static unsigned int count_highmem_pages(void)
}
#endif /* CONFIG_HIGHMEM */
-/**
+/*
* saveable_page - Check if the given page is saveable.
*
* Determine whether a non-highmem page should be included in a hibernation
@@ -1440,7 +1440,7 @@ static inline bool do_copy_page(long *dst, long *src)
return !z;
}
-/**
+/*
* safe_copy_page - Copy a page in a safe way.
*
* Check if the page we are going to copy is marked as present in the kernel
@@ -1687,7 +1687,7 @@ static unsigned long preallocate_image_highmem(unsigned long nr_pages)
return preallocate_image_pages(nr_pages, GFP_IMAGE | __GFP_HIGHMEM);
}
-/**
+/*
* __fraction - Compute (an approximation of) x * (multiplier / base).
*/
static unsigned long __fraction(u64 x, u64 multiplier, u64 base)
@@ -1982,7 +1982,7 @@ int hibernate_preallocate_memory(void)
}
#ifdef CONFIG_HIGHMEM
-/**
+/*
* count_pages_for_highmem - Count non-highmem pages needed for copying highmem.
*
* Compute the number of non-highmem pages that will be necessary for creating
@@ -2003,7 +2003,7 @@ static unsigned int count_pages_for_highmem(unsigned int nr_highmem)
static unsigned int count_pages_for_highmem(unsigned int nr_highmem) { return 0; }
#endif /* CONFIG_HIGHMEM */
-/**
+/*
* enough_free_mem - Check if there is enough free memory for the image.
*/
static int enough_free_mem(unsigned int nr_pages, unsigned int nr_highmem)
@@ -2023,7 +2023,7 @@ static int enough_free_mem(unsigned int nr_pages, unsigned int nr_highmem)
}
#ifdef CONFIG_HIGHMEM
-/**
+/*
* get_highmem_buffer - Allocate a buffer for highmem pages.
*
* If there are some highmem pages in the hibernation image, we may need a
@@ -2035,7 +2035,7 @@ static inline int get_highmem_buffer(int safe_needed)
return buffer ? 0 : -ENOMEM;
}
-/**
+/*
* alloc_highmem_pages - Allocate some highmem pages for the image.
*
* Try to allocate as many pages as needed, but if the number of free highmem
@@ -2065,7 +2065,7 @@ static inline unsigned int alloc_highmem_pages(struct memory_bitmap *bm,
unsigned int n) { return 0; }
#endif /* CONFIG_HIGHMEM */
-/**
+/*
* swsusp_alloc - Allocate memory for hibernation image.
*
* We first try to allocate as many highmem pages as there are
@@ -2292,7 +2292,7 @@ static void duplicate_memory_bitmap(struct memory_bitmap *dst,
}
}
-/**
+/*
* mark_unsafe_pages - Mark pages that were used before hibernation.
*
* Mark the pages that cannot be used for storing the image during restoration,
@@ -2330,7 +2330,7 @@ static int check_header(struct swsusp_info *info)
return 0;
}
-/**
+/*
* load_header - Check the image header and copy the data from it.
*/
static int load_header(struct swsusp_info *info)
@@ -2483,7 +2483,7 @@ static int prepare_highmem_image(struct memory_bitmap *bm,
static struct page *last_highmem_page;
-/**
+/*
* get_highmem_page_buffer - Prepare a buffer to store a highmem image page.
*
* For a given highmem image page get a buffer that suspend_write_next() should
@@ -2706,7 +2706,7 @@ static int prepare_image(struct memory_bitmap *new_bm, struct memory_bitmap *bm,
return error;
}
-/**
+/*
* get_buffer - Get the address to store the next image data page.
*
* Get the address that snapshot_write_next() should return to its caller to
@@ -2843,7 +2843,7 @@ int snapshot_write_next(struct snapshot_handle *handle)
return PAGE_SIZE;
}
-/**
+/*
* snapshot_write_finalize - Complete the loading of a hibernation image.
*
* Must be called after the last call to snapshot_write_next() in case the last
--
2.47.3
reply other threads:[~2026-06-09 23:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260609231626.38839-1-adinata.softwareengineer@gmail.com \
--to=adinata.softwareengineer@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-kernel-mentees@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox