Linux Power Management development
 help / color / mirror / Atom feed
From: Janne Grunau <j@jannau.net>
To: Sasha Finkelstein <k@chaosmail.tech>
Cc: Sven Peter <sven@kernel.org>, Neal Gompa <neal@gompa.dev>,
	Sebastian Reichel <sre@kernel.org>,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] power: supply: macsmc: Support macOS 27 SMC firmware
Date: Fri, 12 Jun 2026 21:33:53 +0200	[thread overview]
Message-ID: <20260612193353.GA7993@robin.jannau.net> (raw)
In-Reply-To: <20260612-gate-power-v2-1-de76cb9bb7ef@chaosmail.tech>

On Fri, Jun 12, 2026 at 08:36:03PM +0200, Sasha Finkelstein wrote:
> The SMC firmware included in macOS 27 changed the size of BCF0 key from
> 4 to 1 bytes. This key is used for indicating that battery state is
> critically low.
> 
> Reviewed-by: Sven Peter <sven@kernel.org>
> Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>

I think
Fixes: 0ebf821cf6c7 ("power: supply: Add macsmc-power driver for Apple Silicon")
and "Cc: stable" could be justified. Timing is a little unfortunate with
v7.1 expected on sunday.

> ---
> Changes in v2:
> - Addressing review feedback
> - Link to v1: https://patch.msgid.link/20260611-gate-power-v1-1-8a62721086c7@chaosmail.tech
> ---
>  drivers/power/supply/macsmc-power.c | 35 ++++++++++++++++++++++++++++++++---
>  1 file changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/supply/macsmc-power.c b/drivers/power/supply/macsmc-power.c
> index 33ca07460f3a..747315e372bc 100644
> --- a/drivers/power/supply/macsmc-power.c
> +++ b/drivers/power/supply/macsmc-power.c
> @@ -86,6 +86,7 @@ struct macsmc_power {
>  	bool has_ch0i; /* Force discharge (Older firmware) */
>  	bool has_ch0c; /* Inhibit charge (Older firmware) */
>  	bool has_chte; /* Inhibit charge (Modern firmware) */
> +	bool bcf0_1byte; /* Battery critical key is 1 byte (Modern firmware) */
>  
>  	u8 num_cells;
>  	int nominal_voltage_mv;
> @@ -273,6 +274,19 @@ static int macsmc_battery_get_date(const char *s, int *out)
>  	return 0;
>  }
>  
> +static int macsmc_battery_read_bcf0(struct macsmc_power *power, u32 *val)
> +{
> +	u8 tval = 0;
> +	int ret;
> +
> +	if (!power->bcf0_1byte)
> +		return apple_smc_read_u32(power->smc, SMC_KEY(BCF0), val);
> +
> +	ret = apple_smc_read_u8(power->smc, SMC_KEY(BCF0), &tval);
> +	*val = tval;
> +	return ret;
> +}

I think the following is slightly easier to read

{
	if (power->bcf0_1byte) {
		u8 tval = 0;
		int ret = apple_smc_read_u8(power->smc, SMC_KEY(BCF0), &tval);
		*val = tval;
		return ret;
	}

	return apple_smc_read_u32(power->smc, SMC_KEY(BCF0), val);
}

Not worth a respin in itself but worthwhile if there's a v3 for the the
Fixes: tag.

> +
>  static int macsmc_battery_get_capacity_level(struct macsmc_power *power)
>  {
>  	bool flag;
> @@ -280,7 +294,7 @@ static int macsmc_battery_get_capacity_level(struct macsmc_power *power)
>  	int ret;
>  
>  	/* Check for emergency shutdown condition */
> -	if (apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &val) >= 0 && val)
> +	if (macsmc_battery_read_bcf0(power, &val) >= 0 && val)
>  		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
>  
>  	/* Check AC status for whether we could boot in this state */
> @@ -577,7 +591,7 @@ static void macsmc_power_critical_work(struct work_struct *wrk)
>  	 * Check if SMC flagged the battery as empty.
>  	 * We trigger a graceful shutdown to let the OS save data.
>  	 */
> -	if (apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &bcf0) == 0 && bcf0 != 0) {
> +	if (macsmc_battery_read_bcf0(power, &bcf0) == 0 && bcf0 != 0) {
>  		power->orderly_shutdown_triggered = true;
>  		dev_crit(power->dev, "Battery critical (empty flag set). Triggering orderly shutdown.\n");
>  		orderly_poweroff(true);
> @@ -616,6 +630,7 @@ static int macsmc_power_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct apple_smc *smc = dev_get_drvdata(pdev->dev.parent);
>  	struct power_supply_config psy_cfg = {};
> +	struct apple_smc_key_info info;
>  	struct macsmc_power *power;
>  	bool has_battery = false;
>  	bool has_ac_adapter = false;
> @@ -714,6 +729,20 @@ static int macsmc_power_probe(struct platform_device *pdev)
>  		if (apple_smc_key_exists(smc, SMC_KEY(CH0I)))
>  			power->has_ch0i = true;
>  
> +		ret = apple_smc_get_key_info(power->smc, SMC_KEY(BCF0), &info);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to determine BCF0 key size\n");
> +			return ret;
> +		}
> +		if (info.size == 1)
> +			power->bcf0_1byte = true;
> +		else if (info.size == 4)
> +			power->bcf0_1byte = false;
> +		else {
> +			dev_err(&pdev->dev, "Unexpected BCF0 key size %d\n", info.size);
> +			return -EIO;
> +		}
> +
>  		/* Reset "Optimised Battery Charging" flags to default state */
>  		if (power->has_chte)
>  			apple_smc_write_u32(smc, SMC_KEY(CHTE), 0);
> @@ -766,7 +795,7 @@ static int macsmc_power_probe(struct platform_device *pdev)
>  		power->nominal_voltage_mv = MACSMC_NOMINAL_CELL_VOLTAGE_MV * power->num_cells;
>  
>  		/* Enable critical shutdown notifications by reading status once */
> -		apple_smc_read_u32(power->smc, SMC_KEY(BCF0), &val32);
> +		macsmc_battery_read_bcf0(power, &val32);
>  
>  		psy_cfg.drv_data = power;
>  		power->batt = devm_power_supply_register(dev, &power->batt_desc, &psy_cfg);
> 
> ---

Reviewed-by: Janne Grunau <j@jannau.net>

thanks
Janne

  reply	other threads:[~2026-06-12 19:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-12 18:36 [PATCH v2] power: supply: macsmc: Support macOS 27 SMC firmware Sasha Finkelstein
2026-06-12 19:33 ` Janne Grunau [this message]
2026-06-12 19:42   ` Sasha Finkelstein
2026-06-12 19:56     ` Janne Grunau
2026-06-12 19:53 ` Joshua Peisach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260612193353.GA7993@robin.jannau.net \
    --to=j@jannau.net \
    --cc=asahi@lists.linux.dev \
    --cc=k@chaosmail.tech \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=neal@gompa.dev \
    --cc=sre@kernel.org \
    --cc=sven@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox