Linux Power Management development
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, rafael@kernel.org,
	linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH V2 2/8] i3c: master: Support IBI-based wakeup capability
Date: Tue, 28 Jul 2026 18:53:02 +0300	[thread overview]
Message-ID: <20260728155308.142713-3-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260728155308.142713-1-adrian.hunter@intel.com>

An I3C controller acts as a bus controller for one or more I3C devices.
If the controller can wake the system in response to an In-Band
Interrupt (IBI), then any device on that bus that is capable of
generating IBIs can potentially be used as a wakeup source.

Add an ibi_wakeup flag to struct i3c_master_controller so controller
drivers can advertise support for IBI-based wakeup.

If set, mark IBI-capable I3C devices as wakeup capable when they are
registered, allowing wakeup management through the standard device
wakeup framework.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---


Changes in V2:

	Dropped the redundant #include <linux/pm_wakeup.h>.  That header
	must not be included directly, and linux/device.h, which is
	already included, provides device_set_wakeup_capable().


 drivers/i3c/master.c       | 7 +++++++
 include/linux/i3c/master.h | 2 ++
 2 files changed, 9 insertions(+)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 874f6e11b296..cf3345265ac0 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -2008,6 +2008,13 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
 		if (desc->boardinfo)
 			desc->dev->dev.of_node = desc->boardinfo->of_node;
 
+		/*
+		 * In the case of IBI wakeup, any IBI-capable device can
+		 * wakeup.
+		 */
+		if (master->ibi_wakeup && (desc->info.bcr & I3C_BCR_IBI_REQ_CAP))
+			device_set_wakeup_capable(&desc->dev->dev, true);
+
 		list_add_tail(&desc->dev->node, &i3c_unreg_devs);
 	}
 
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index fa1c98f0f5c1..99f89fef7653 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -513,6 +513,7 @@ struct i3c_master_controller_ops {
  * @hotjoin: true if the master support hotjoin
  * @rpm_allowed: true if Runtime PM allowed
  * @rpm_ibi_allowed: true if IBI and Hot-Join allowed while runtime suspended
+ * @ibi_wakeup: IBI can wakeup the system
  * @shutting_down: set to true when master begins shutdown or unregister
  * @boardinfo.i3c: list of I3C  boardinfo objects
  * @boardinfo.i2c: list of I2C boardinfo objects
@@ -547,6 +548,7 @@ struct i3c_master_controller {
 	unsigned int hotjoin: 1;
 	unsigned int rpm_allowed: 1;
 	unsigned int rpm_ibi_allowed: 1;
+	unsigned int ibi_wakeup: 1;
 	bool shutting_down;
 	struct {
 		struct list_head i3c;
-- 
2.53.0


  parent reply	other threads:[~2026-07-28 15:53 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28 15:53 [PATCH V2 0/8] i3c: Support IBI-based system wakeup Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 1/8] i3c: master: Fix recursive locking during device registration Adrian Hunter
2026-07-28 15:53 ` Adrian Hunter [this message]
2026-07-28 15:53 ` [PATCH V2 3/8] i3c: master: Report wakeup events for IBIs Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 4/8] i3c: master: Add helper to query bus wakeup requirements Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 5/8] i3c: master: Reject IBI requests from non-IBI-capable devices Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 6/8] i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 7/8] i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() Adrian Hunter
2026-07-28 15:53 ` [PATCH V2 8/8] i3c: mipi-i3c-hci: Advertise IBI wakeup capability Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728155308.142713-3-adrian.hunter@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=Frank.Li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox