From: Ivy Lopez <skunkolee@gmail.com>
To: sre@kernel.org
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Ivy Lopez <skunkolee@gmail.com>
Subject: [PATCH] w1: fix spelling mistakes in comments across the subsystem
Date: Wed, 12 Aug 2026 18:41:13 -0600 [thread overview]
Message-ID: <20260813004113.29943-2-skunkolee@gmail.com> (raw)
In-Reply-To: <20260813004113.29943-1-skunkolee@gmail.com>
Following up on a prior patch that only fixed w1_netlink.c, sweep
the rest of the w1 subsystem for the same class of comment typos:
"loosing" -> "losing", "deatch" -> "detach", "messagse" -> "messages",
"continusly" -> "continuously", "attribut" -> "attribute",
"deactive" -> "deactivate", "determing" -> "determining",
"discrepency" -> "discrepancy", "rerurn" -> "return".
No functional change.
Signed-off-by: Ivy Lopez <skunkolee@gmail.com>
---
drivers/w1/masters/ds2482.c | 2 +-
drivers/w1/masters/ds2490.c | 4 ++--
drivers/w1/masters/omap_hdq.c | 2 +-
drivers/w1/slaves/w1_ds28e17.c | 2 +-
drivers/w1/slaves/w1_therm.c | 2 +-
drivers/w1/w1.c | 2 +-
drivers/w1/w1_family.c | 2 +-
drivers/w1/w1_netlink.h | 2 +-
8 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 0069e6f854d7..040d66415a9b 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -421,7 +421,7 @@ static u8 ds2482_w1_set_pullup(void *data, int delay)
/* if delay is non-zero activate the pullup,
* the strong pullup will be automatically deactivated
- * by the master, so do not explicitly deactive it
+ * by the master, so do not explicitly deactivate it
*/
if (delay) {
/* both waits are crucial, otherwise devices might not be
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index aa1f57f74397..3a0740d91a53 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -562,7 +562,7 @@ static int ds_write_bit(struct ds_device *dev, u8 bit)
/* Set COMM_ICP to write without a readback. Note, this will
* produce one time slot, a down followed by an up with COMM_D
- * only determing the timing.
+ * only determining the timing.
*/
err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP |
(bit ? COMM_D : 0), 0);
@@ -691,7 +691,7 @@ static void ds9490r_search(void *data, struct w1_master *master,
* If the number of devices found is less than or equal to the
* search_limit, that number of IDs will be returned. If there are
* more, search_limit IDs will be returned followed by a non-zero
- * discrepency value.
+ * discrepancy value.
*/
struct ds_device *dev = data;
int err;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index d13db3396570..0982efa2b25b 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -282,7 +282,7 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
}
/*
- * wait for both INIT and GO bits rerurn to zero.
+ * wait for both INIT and GO bits return to zero.
* zero wait time expected for interrupt mode.
*/
ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
diff --git a/drivers/w1/slaves/w1_ds28e17.c b/drivers/w1/slaves/w1_ds28e17.c
index e53bc41bde3c..d656233afe54 100644
--- a/drivers/w1/slaves/w1_ds28e17.c
+++ b/drivers/w1/slaves/w1_ds28e17.c
@@ -101,7 +101,7 @@ static int w1_f19_i2c_busy_wait(struct w1_slave *sl, size_t count)
timebases[data->speed] * (data->stretch) * count
+ W1_F19_BUSY_GRATUITY);
- /* Now continusly check the busy flag sent by the DS28E17. */
+ /* Now continuously check the busy flag sent by the DS28E17. */
checks = W1_F19_BUSY_CHECKS;
while ((checks--) > 0) {
/* Return success if the busy flag is cleared. */
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index d96b224e2215..02acf84ffec5 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -355,7 +355,7 @@ static DEVICE_ATTR_RW(alarms);
static DEVICE_ATTR_RW(conv_time);
static DEVICE_ATTR_RW(features);
-static DEVICE_ATTR_RW(therm_bulk_read); /* attribut at master level */
+static DEVICE_ATTR_RW(therm_bulk_read); /* attribute at master level */
/* Interface Functions declaration */
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 486f321eadc8..67ea14a06319 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -1177,7 +1177,7 @@ int w1_process(void *data)
__set_current_state(TASK_INTERRUPTIBLE);
- /* hold list_mutex until after interruptible to prevent loosing
+ /* hold list_mutex until after interruptible to prevent losing
* the wakeup signal when async_cmd is added.
*/
mutex_unlock(&dev->list_mutex);
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 97da4f156e9a..8152a43c8c76 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -67,7 +67,7 @@ void w1_unregister_family(struct w1_family *fent)
}
spin_unlock(&w1_flock);
- /* deatch devices using this family code */
+ /* detach devices using this family code */
w1_reconnect_slaves(fent, 0);
while (atomic_read(&fent->refcnt)) {
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index 449680a61569..1818a06740eb 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -14,7 +14,7 @@
/**
* enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags
*
- * @W1_CN_BUNDLE: Request bundling replies into fewer messagse. Be prepared
+ * @W1_CN_BUNDLE: Request bundling replies into fewer messages. Be prepared
* to handle multiple struct cn_msg, struct w1_netlink_msg, and
* struct w1_netlink_cmd in one packet.
*/
--
2.55.0
next prev parent reply other threads:[~2026-08-13 0:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-08 21:44 [PATCH] power: supply: ds2760_battery: fix NULL pointer dereference in w1_ds2760_remove_slave() Ivy Lopez
2026-08-12 22:00 ` Sebastian Reichel
2026-08-13 0:41 ` [PATCH v2] power: supply: ds2760_battery: convert to devm-managed workqueue and pm_notifier Ivy Lopez
2026-08-13 0:41 ` Ivy Lopez [this message]
2026-08-13 0:43 ` [PATCH] w1: fix spelling mistakes in comments across the subsystem Ivy Lopez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813004113.29943-2-skunkolee@gmail.com \
--to=skunkolee@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox