[PATCH 1/2] power: supply: qcom_battmgr: fix the battery current sign on Kaanapali

[Joonhoe Kim <26rote@gmail.com>]

The Kaanapali battery firmware reports the battery current with
discharge positive: on a Lenovo Legion Tab Y700 Gen 5 current_now reads
-9.1 A while charging and +0.57 A on battery. The power_supply ABI has
charging positive, and upower reports such a charging battery as
discharging.

Other firmware behind the same callback uses the ABI sign [1], so
negate the value only for qcom,kaanapali-pmic-glink.

Fixes: 16a7c32e586e ("power: supply: qcom_battmgr: Add support for Glymur and Kaanapali")
Link: https://lore.kernel.org/all/20260829054546.86210-1-jan.brummer@tabos.org/ [1]
Signed-off-by: Joonhoe Kim <26rote@gmail.com>
---
I could only check this on one device, not on MTP or QRD firmware.
Anjelique, could you confirm the sign there?

Both patches apply before or after my two battmgr patches still under
review (USB_ADAP_TYPE v2 and the USB input current limit).

 drivers/power/supply/qcom_battmgr.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/power/supply/qcom_battmgr.c b/drivers/power/supply/qcom_battmgr.c
index a7237ba09be1..0d55458b2881 100644
--- a/drivers/power/supply/qcom_battmgr.c
+++ b/drivers/power/supply/qcom_battmgr.c
@@ -313,6 +313,7 @@ struct qcom_battmgr {
 	struct pmic_glink_client *client;
 
 	enum qcom_battmgr_variant variant;
+	bool current_inverted;
 
 	struct power_supply *ac_psy;
 	struct power_supply *bat_psy;
@@ -1435,6 +1436,8 @@ static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
 			break;
 		case BATT_CURR_NOW:
 			battmgr->status.current_now = le32_to_cpu(resp->intval.value);
+			if (battmgr->current_inverted)
+				battmgr->status.current_now = -battmgr->status.current_now;
 			break;
 		case BATT_TEMP:
 			val = le32_to_cpu(resp->intval.value);
@@ -1659,6 +1662,9 @@ static int qcom_battmgr_probe(struct auxiliary_device *adev,
 	else
 		battmgr->variant = QCOM_BATTMGR_SM8350;
 
+	battmgr->current_inverted = device_is_compatible(dev->parent,
+							 "qcom,kaanapali-pmic-glink");
+
 	ret = qcom_battmgr_charge_control_thresholds_init(battmgr);
 	if (ret < 0)
 		return dev_err_probe(dev, ret,

base-commit: b810335a0699d1810683796b0e3ffe8827ddfe6c
-- 
2.43.0