From: Zi-Yu Chen <zychennvt@gmail.com>
To: rafael@kernel.org, daniel.lezcano@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, p.zabel@pengutronix.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rui.zhang@intel.com, lukasz.luba@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH 4/4] arm64: dts: nuvoton: ma35d1: Add thermal zone
Date: Tue, 17 Nov 2026 14:05:01 +0800 [thread overview]
Message-ID: <20261117060501.2611071-5-zychennvt@gmail.com> (raw)
In-Reply-To: <20261117060501.2611071-1-zychennvt@gmail.com>
Describe the SYS block as the thermal sensor provider and add a thermal
zone with a critical trip point for the SoC.
Signed-off-by: Zi-Yu Chen <zychennvt@gmail.com>
---
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index 7228ad4735b5..986f3cc4176b 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -63,6 +63,21 @@ gic: interrupt-controller@50801000 {
IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal-zones {
+ soc-thermal {
+ polling-delay = <1000>;
+ thermal-sensors = <&sys>;
+
+ trips {
+ soc_crit: soc-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
@@ -86,6 +101,7 @@ sys: system-management@40460000 {
compatible = "nuvoton,ma35d1-reset", "syscon";
reg = <0x0 0x40460000 0x0 0x200>;
#reset-cells = <1>;
+ #thermal-sensor-cells = <0>;
};
clk: clock-controller@40460200 {
--
2.34.1
prev parent reply other threads:[~2026-11-17 6:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 6:04 [PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support Zi-Yu Chen
2026-11-17 6:04 ` [PATCH 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells Zi-Yu Chen
2026-11-17 6:04 ` [PATCH 2/4] reset: ma35d1: Register auxiliary device for the temperature sensor Zi-Yu Chen
2026-11-17 6:05 ` [PATCH 3/4] thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver Zi-Yu Chen
2026-11-17 6:05 ` Zi-Yu Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117060501.2611071-5-zychennvt@gmail.com \
--to=zychennvt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox