From: Rob Herring <robh@kernel.org>
To: Alexey Charkov <alchark@flipper.net>
Cc: Sebastian Reichel <sre@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] dt-bindings: power: supply: battery: Add a charging temperature range
Date: Thu, 19 Nov 2026 16:58:08 -0600 [thread overview]
Message-ID: <20261119225808.GA1121782-robh@kernel.org> (raw)
In-Reply-To: <20261109-battery-charge-temp-range-v1-1-a967abd8b80c@flipper.net>
On Mon, Nov 09, 2026 at 01:41:48PM +0400, Alexey Charkov wrote:
> Describe batteries rated for separate charging and discharging
> temperature ranges, such as 0-45C for charging and -20-60C for
> discharging, often with a reduced charge current near the ends of the
> charging range: operating-range-celsius holds a single range, and
> existing users read it both as the limit for any use of the battery and
> as the limit for charging.
>
> Add charge-temp-range-celsius for the charging range, falling back to
> operating-range-celsius when absent, and state that
> operating-range-celsius covers discharging. Add the charge current and
> voltage to use between alert-celsius and the charging range limits, to
> describe a reduced charge rate near those limits and none beyond them.
>
> A missing half of an alert charge current and voltage pair falls back to
> the matching constant-charge-* setting. alert-celsius is expected to fully
> fall inside charge-temp-range-celsius, but when it does not,
> charge-temp-range-celsius takes precedence to ensure no charge occurs
> outside the allowed range.
>
> Signed-off-by: Alexey Charkov <alchark@flipper.net>
> ---
> .../devicetree/bindings/power/supply/battery.yaml | 45 +++++++++++++++++++++-
> 1 file changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
> index 9575ee1491bb..d2f2ed9a01fe 100644
> --- a/Documentation/devicetree/bindings/power/supply/battery.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
> @@ -111,11 +111,21 @@ properties:
> for each of the battery capacity lookup table.
>
> operating-range-celsius:
> - description: operating temperature range of a battery
> + description: operating temperature range of a battery, in which it can be
> + discharged. Charging may be further restricted by
> + charge-temp-range-celsius.
> items:
> - description: minimum temperature at which battery can operate
> - description: maximum temperature at which battery can operate
>
> + charge-temp-range-celsius:
'temp' is kind of redundant with 'celsius' and a departure from all the
other temperature properties here.
Rob
next prev parent reply other threads:[~2026-11-19 22:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 9:41 [PATCH 0/3] power: supply: battery: Allow separate charging limits vs. discharging Alexey Charkov
2026-11-09 9:41 ` [PATCH 1/3] dt-bindings: power: supply: battery: Add a charging temperature range Alexey Charkov
2026-11-19 22:58 ` Rob Herring [this message]
2026-11-09 9:41 ` [PATCH 2/3] power: supply: core: Read the charging temperature range and alert settings Alexey Charkov
2026-11-09 9:41 ` [PATCH 3/3] power: supply: samsung-sdi-battery: Set the charging temperature range Alexey Charkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119225808.GA1121782-robh@kernel.org \
--to=robh@kernel.org \
--cc=alchark@flipper.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox