Linux Power Management development
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org, shawn.lin@rock-chips.com,
	linux-pm@vger.kernel.org, heiko@sntech.de, conor+dt@kernel.org,
	krzk+dt@kernel.org, robh@kernel.org, sre@kernel.org,
	t.schramm@manjaro.org, xsf@rock-chips.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V2 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218
Date: Fri, 20 Nov 2026 15:28:13 -0600	[thread overview]
Message-ID: <20261120212815.35663-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261120212815.35663-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add bindings for the Cellwise cw2215/cw2217/cw2218 i2C interface
battery gauge. It is similar in function to the existing cw2015 but
with a different register layout. Each of the cw2215, cw2217 and cw2218
only really differ in the minor specs and the hardware ID they display
when queried. shunt-resistor-micro-ohms is a property in use for
multiple devices so not appending a vendor prefix to it.

Move the minItems and maxItems for the battery profile to a conditional
based on the compatible string, as the new monitors require 80 bytes of
firmware instead of 64 bytes.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/power/supply/cw2015_battery.yaml | 41 ++++++++++++++++---
 1 file changed, 35 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index f7bde324153d..dce7c51e4e62 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,12 +14,13 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
-    const: cellwise,cw2015
+    enum:
+      - cellwise,cw2015
+      - cellwise,cw2215
+      - cellwise,cw2217
+      - cellwise,cw2218
 
   reg:
     maxItems: 1
@@ -31,8 +32,6 @@ properties:
       it is to mail two batteries to a test facility of CellWise and receive
       back a test report with the binary blob.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 64
-    maxItems: 64
 
   cellwise,monitor-interval-ms:
     description:
@@ -43,12 +42,42 @@ properties:
     minItems: 1
     maxItems: 8 # Should be enough
 
+  shunt-resistor-micro-ohms:
+    description:
+      The value, in micro-ohms, of the shunt resistor used for sampling
+      the battery current.
+    minimum: 1000
+    maximum: 50000
+    default: 1500
+
   monitored-battery: true
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cellwise,cw2015
+    then:
+      properties:
+        shunt-resistor-micro-ohms: false
+
+        cellwise,battery-profile:
+          minItems: 64
+          maxItems: 64
+
+    else:
+      properties:
+        cellwise,battery-profile:
+          minItems: 80
+          maxItems: 80
+
 additionalProperties: false
 
 examples:
-- 
2.53.0


  reply	other threads:[~2026-11-20 21:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 21:28 [PATCH V2 0/3] Add Cellwise CW2217 Chris Morgan
2026-11-20 21:28 ` Chris Morgan [this message]
2026-11-20 21:28 ` [PATCH V2 2/3] power: supply: cw2217: Add support for Cellwise cw2217 Chris Morgan
2026-11-20 21:28 ` [PATCH V2 3/3] arm64: dts: rockchip: Add Battery Gauge to Anbernic Vita-Pro Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120212815.35663-2-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=robh@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=sre@kernel.org \
    --cc=t.schramm@manjaro.org \
    --cc=xsf@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox