From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: [PATCH] PCI / ACPI: Always resume devices on ACPI wakeup notifications Date: Sat, 23 Mar 2013 15:33:03 +0100 Message-ID: <2282655.IicBMMa6jN@vostro.rjw.lan> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7Bit Return-path: Sender: linux-acpi-owner@vger.kernel.org To: Bjorn Helgaas Cc: ACPI Devel Maling List , LKML , Linux PM list , Len Brown , Matthew Garrett , Sarah Sharp , "Accardi, Kristen C" , "Huang, Ying" , linux-pci@vger.kernel.org List-Id: linux-pm@vger.kernel.org From: Rafael J. Wysocki It turns out that _Lxx control methods provided by some BIOSes clear the PME Status bit of PCI devices they handle, which means that pci_acpi_wake_dev() cannot really use that bit to check whether or not the device has signalled wakeup. For this reason, make pci_acpi_wake_dev() always attempt to resume the device it is called for regardless of the device's PME Status bit value (that bit still has to be cleared if set at this point, though). Reported-by: Sarah Sharp Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci-acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) Index: linux-pm/drivers/pci/pci-acpi.c =================================================================== --- linux-pm.orig/drivers/pci/pci-acpi.c +++ linux-pm/drivers/pci/pci-acpi.c @@ -53,14 +53,15 @@ static void pci_acpi_wake_dev(acpi_handl return; } - if (!pci_dev->pm_cap || !pci_dev->pme_support - || pci_check_pme_status(pci_dev)) { - if (pci_dev->pme_poll) - pci_dev->pme_poll = false; + /* Clear PME Status if set. */ + if (pci_dev->pme_support) + pci_check_pme_status(pci_dev); - pci_wakeup_event(pci_dev); - pm_runtime_resume(&pci_dev->dev); - } + if (pci_dev->pme_poll) + pci_dev->pme_poll = false; + + pci_wakeup_event(pci_dev); + pm_runtime_resume(&pci_dev->dev); if (pci_dev->subordinate) pci_pme_wakeup_bus(pci_dev->subordinate);