From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: rafael.j.wysocki@intel.com, Mario.Limonciello@amd.com,
viresh.kumar@linaro.org, Ray.Huang@amd.com,
gautham.shenoy@amd.com, Borislav.Petkov@amd.com,
Perry Yuan <perry.yuan@amd.com>
Cc: Alexander.Deucher@amd.com, Xinmei.Huang@amd.com,
Xiaojian.Du@amd.com, Li.Meng@amd.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 0/7] AMD Pstate Driver Core Performance Boost
Date: Wed, 13 Mar 2024 15:48:58 +0100 [thread overview]
Message-ID: <2721197.mvXUDI8C0e@natalenko.name> (raw)
In-Reply-To: <cover.1710322310.git.perry.yuan@amd.com>
[-- Attachment #1: Type: text/plain, Size: 4084 bytes --]
On středa 13. března 2024 11:04:37, CET Perry Yuan wrote:
>
> Hi all,
> The patchset series add core performance boost feature for AMD pstate
> driver including passisve ,guide and active mode support.
>
> User can change core frequency boost control with a new sysfs entry:
>
> "/sys/devices/system/cpu/amd_pstate/cpb_boost"
>
> The legancy boost interface has been removed due to the function
> conflict with new cpb_boost which can support all modes.
>
> 1). enable core boost:
> $ sudo bash -c "echo 0 > /sys/devices/system/cpu/amd_pstate/cpb_boost"
> $ lscpu -ae
> CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ
> 0 0 0 0 0:0:0:0 yes 4201.0000 400.0000 2983.578
> 1 0 0 1 1:1:1:0 yes 4201.0000 400.0000 2983.578
> 2 0 0 2 2:2:2:0 yes 4201.0000 400.0000 2583.855
> 3 0 0 3 3:3:3:0 yes 4201.0000 400.0000 2983.578
> 4 0 0 4 4:4:4:0 yes 4201.0000 400.0000 2983.578
>
> 2). disabble core boost:
> $ sudo bash -c "echo 1 > /sys/devices/system/cpu/amd_pstate/cpb_boost"
> $ lscpu -ae
> 0 0 0 0 0:0:0:0 yes 5759.0000 400.0000 2983.578
> 1 0 0 1 1:1:1:0 yes 5759.0000 400.0000 2983.578
> 2 0 0 2 2:2:2:0 yes 5759.0000 400.0000 2983.578
> 3 0 0 3 3:3:3:0 yes 5759.0000 400.0000 2983.578
> 4 0 0 4 4:4:4:0 yes 5759.0000 400.0000 2983.578
>
>
> The patches have been tested with the AMD 7950X processor and many users
> would like to get core boost control enabled for power saving.
>
> If you would like to test this patchset, it needs to apply the patchset
> based on below one latest version patchset.
> https://lore.kernel.org/lkml/20240208102122.GAZcSrIkbPJfIExdF6@fat_crate.local/
>
>
> Perry.
>
>
> Changes from v3:
> * rebased to linux-pm/bleeding-edge v6.8
> * rename global to amd_pstate_global_params(Oleksandr Natalenko)
Would appreciate being in Cc: then.
> * remove comments for boot_supported in amd_pstate.h
> * fix the compiler warning for amd-pstate-ut.ko
> * use for_each_online_cpu in cpb_boost_store which fix the null pointer
> error during testing
> * fix the max frequency value to be KHz when cpb boost disabled(Gautham R. Shenoy)
>
> Changes from v2:
> * move global struct to amd-pstate.h
> * fix the amd-pstate-ut with new cpb control interface
>
> Changes from v1:
> * drop suspend/resume fix patch 6/7 because of the fix should be in
> another fix series instead of CPB feature
> * move the set_boost remove patch to the last(Mario)
> * Fix commit info with "Closes:" (Mario)
> * simplified global.cpb_supported initialization(Mario)
> * Add guide mode support for CPB control
> * Fixed some Doc typos and add guide mode info to Doc as well.
>
> v1: https://lore.kernel.org/all/cover.1706255676.git.perry.yuan@amd.com/
> v2: https://lore.kernel.org/lkml/cover.1707047943.git.perry.yuan@amd.com/
> v3: https://lore.kernel.org/lkml/cover.1707297581.git.perry.yuan@amd.com/
>
> Perry Yuan (7):
> cpufreq: amd-pstate: initialize new core precision boost state
> cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control
> cpufreq: amd-pstate: fix max_perf calculation for amd_get_max_freq()
> cpufreq: amd-pstate: fix the MSR highest perf will be reset issue
> while cpb boost off
> Documentation: cpufreq: amd-pstate: introduce the new cpu boost
> control method
> cpufreq: amd-pstate: remove legacy set_boost callback for passive mode
> cpufreq: amd-pstate-ut: support new cpb boost control interface
>
> Documentation/admin-guide/pm/amd-pstate.rst | 11 ++
> drivers/cpufreq/amd-pstate-ut.c | 2 +-
> drivers/cpufreq/amd-pstate.c | 157 +++++++++++++++-----
> include/linux/amd-pstate.h | 16 +-
> 4 files changed, 149 insertions(+), 37 deletions(-)
>
>
--
Oleksandr Natalenko (post-factum)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-03-13 14:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-13 10:04 [PATCH v4 0/7] AMD Pstate Driver Core Performance Boost Perry Yuan
2024-03-13 10:04 ` [PATCH v4 1/7] cpufreq: amd-pstate: initialize new core precision boost state Perry Yuan
2024-03-14 9:04 ` Gautham R. Shenoy
2024-03-14 9:11 ` Yuan, Perry
2024-03-13 10:04 ` [PATCH v4 2/7] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control Perry Yuan
2024-03-14 9:41 ` Gautham R. Shenoy
2024-03-14 9:52 ` Yuan, Perry
2024-03-13 10:04 ` [PATCH v4 3/7] cpufreq: amd-pstate: fix max_perf calculation for amd_get_max_freq() Perry Yuan
2024-03-14 9:43 ` Gautham R. Shenoy
2024-03-13 10:04 ` [PATCH v4 4/7] cpufreq: amd-pstate: fix the MSR highest perf will be reset issue while cpb boost off Perry Yuan
2024-03-14 10:02 ` Gautham R. Shenoy
2024-03-13 10:04 ` [PATCH v4 5/7] Documentation: cpufreq: amd-pstate: introduce the new cpu boost control method Perry Yuan
2024-03-13 10:04 ` [PATCH v4 6/7] cpufreq: amd-pstate: remove legacy set_boost callback for passive mode Perry Yuan
2024-03-14 10:07 ` Gautham R. Shenoy
2024-03-14 10:15 ` Yuan, Perry
2024-03-13 10:04 ` [PATCH v4 7/7] cpufreq: amd-pstate-ut: support new cpb boost control interface Perry Yuan
2024-03-13 14:48 ` Oleksandr Natalenko [this message]
2024-03-14 6:13 ` [PATCH v4 0/7] AMD Pstate Driver Core Performance Boost Yuan, Perry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2721197.mvXUDI8C0e@natalenko.name \
--to=oleksandr@natalenko.name \
--cc=Alexander.Deucher@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Li.Meng@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Ray.Huang@amd.com \
--cc=Xiaojian.Du@amd.com \
--cc=Xinmei.Huang@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=perry.yuan@amd.com \
--cc=rafael.j.wysocki@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).