Re: [PATCH v3 0/4] Raspberry Pi power domains

[Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>]

On Thursday 17 December 2015 11:03:47 Eric Anholt wrote:
> >>
> >>  .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt |  47 ++++
> >>  arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  11 +
> >>  arch/arm/boot/dts/bcm2835.dtsi                     |   2 +-
> >>  arch/arm/mach-bcm/Kconfig                          |  10 +
> >>  arch/arm/mach-bcm/Makefile                         |   1 +
> >>  arch/arm/mach-bcm/raspberrypi-power.c              | 247 +++++++++++++++++++++
> >>  include/dt-bindings/arm/raspberrypi-power.h        |  41 ++++
> >>  include/soc/bcm2835/raspberrypi-firmware.h         |   2 +
> >>  8 files changed, 360 insertions(+), 1 deletion(-)
> >>  create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
> >>  create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
> >>  create mode 100644 include/dt-bindings/arm/raspberrypi-power.h
> >>
> >> --
> >> 2.6.2
> >>
> >
> > Besides a nitpick for patch2, I would also reverse the order of patch3
> > and patch2. DT docs should go in before the actual parsing of the new
> > bindings/compatibles.
> >
> > Anyway, for the hole series, you may add my:
> >
> > Reviewed-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 
> Would your tree be pulling the series (since it's power domains), or
> should I (since it's SOC stuff)?
> 

All of the above files go through the arm-soc tree by default.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html