From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Courtier-Dutton Subject: Re: suspend-to-ram fails resume. Date: Sun, 19 Feb 2006 17:58:52 +0000 Message-ID: <43F8B1DC.7060204@superbug.co.uk> References: <43EE824B.20609@superbug.co.uk> <20060215233300.GB3490@openzaurus.ucw.cz> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030805090502030005000401" Return-path: In-Reply-To: <20060215233300.GB3490@openzaurus.ucw.cz> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.osdl.org Errors-To: linux-pm-bounces@lists.osdl.org To: Pavel Machek Cc: linux-pm@lists.osdl.org List-Id: linux-pm@vger.kernel.org This is a multi-part message in MIME format. --------------030805090502030005000401 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Pavel Machek wrote: >> "hibernate" and restore to/from disk works fine. >> I have been trying to resume after running a "hibernate-ram" script. >> Just using a text console, no X. >> >> I attach a log with comments in it. >> I have a Nvidia FX5200 video card. >> >> After resume the display is blank. ping works from a remote machine, but >> ssh does not work. >> >> What can I do to help diagnose this problem? >> > > get video to work - see Doc*/power/video.txt and see > what are last messages on console. > I have sort of solved my problem. I can exit from suspend ok now, but I have to disable the detection of the power button in the /etc/acpi scripts. So, I now need some way of disabling detection of the power button while it is exiting from suspend. Does anyone have any ideas how to? James --------------030805090502030005000401 Content-Type: text/plain; name="power-works.txt" Content-Disposition: inline; filename="power-works.txt" Content-Transfer-Encoding: quoted-printable X-MIME-Autoconverted: from 8bit to quoted-printable by smtp.osdl.org id k1JHx1DZ001678 # Press the Power button to check that the power off script is disabled. Feb 19 17:45:59 localhost logger: ACPI action power is not defined # Run the hibernate-ram script (from gentoo) Feb 19 17:46:24 localhost kernel: ehci_hcd 0000:00:1d.7: remove, state 1 Feb 19 17:46:24 localhost kernel: usb usb1: USB disconnect, address 1 Feb 19 17:46:24 localhost kernel: usb 1-3: USB disconnect, address 2 Feb 19 17:46:24 localhost kernel: usb 1-3.4: USB disconnect, address 3 Feb 19 17:46:24 localhost kernel: ehci_hcd 0000:00:1d.7: USB bus 1 deregi= stered Feb 19 17:46:24 localhost kernel: ACPI: PCI interrupt for device 0000:00:= 1d.7 disabled Feb 19 17:46:25 localhost kernel: PM: Preparing system for mem sleep Feb 19 17:46:25 localhost kernel: Freezing cpus ... Feb 19 17:46:25 localhost kernel: CPU 1 is now offline Feb 19 17:46:25 localhost kernel: CPU1 is down Feb 19 17:47:10 localhost kernel: Stopping tasks: =3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D| Feb 19 17:47:10 localhost kernel: ACPI: PCI interrupt for device 0000:02:= 01.0 disabled Feb 19 17:47:10 localhost kernel: ACPI: PCI interrupt for device 0000:00:= 1f.2 disabled Feb 19 17:47:10 localhost kernel: PM: Entering mem sleep # System has fallen to sleep. # Press the Power buffer to wake it up. Feb 19 17:47:10 localhost kernel: Intel machine check architecture suppor= ted. Feb 19 17:47:10 localhost kernel: Intel machine check reporting enabled o= n CPU#0. Feb 19 17:47:10 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (= 12) available Feb 19 17:47:10 localhost kernel: CPU0: Thermal monitoring enabled Feb 19 17:47:10 localhost kernel: Back to C! Feb 19 17:47:10 localhost kernel: PM: Finishing wakeup. Feb 19 17:47:10 localhost kernel: PCI: Setting latency timer of device 00= 00:00:1e.0 to 64 Feb 19 17:47:10 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> = GSI 18 (level, low) -> IRQ 169 Feb 19 17:47:10 localhost kernel: PCI: Setting latency timer of device 00= 00:00:1f.2 to 64 Feb 19 17:47:10 localhost kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> = GSI 18 (level, low) -> IRQ 169 Feb 19 17:47:10 localhost kernel: PCI: Setting latency timer of device 00= 00:02:01.0 to 64 Feb 19 17:47:10 localhost kernel: ACPI: PCI Interrupt 0000:03:02.0[A] -> = GSI 18 (level, low) -> IRQ 169 Feb 19 17:47:10 localhost kernel: ACPI: PCI Interrupt 0000:03:03.0[A] -> = GSI 19 (level, low) -> IRQ 177 Feb 19 17:47:10 localhost kernel: PCI: Enabling device 0000:03:05.2 (0000= -> 0002) Feb 19 17:47:10 localhost kernel: ACPI: PCI Interrupt 0000:03:05.2[B] -> = GSI 22 (level, low) -> IRQ 193 Feb 19 17:47:10 localhost kernel: ata1: dev 0 configured for UDMA/33 Feb 19 17:47:10 localhost kernel: ata1: dev 1 configured for UDMA/33 Feb 19 17:47:10 localhost kernel: ATA: abnormal status 0x80 on port 0x177 Feb 19 17:47:10 localhost last message repeated 2 times Feb 19 17:47:10 localhost kernel: e1000: eth0: e1000_watchdog_task: NIC L= ink is Up 100 Mbps Full Duplex Feb 19 17:47:10 localhost kernel: ata2: slow completion (cmd ef) Feb 19 17:47:10 localhost kernel: ata2: dev 0 configured for UDMA/133 Feb 19 17:47:10 localhost kernel: ata2: dev 1 configured for UDMA/133 Feb 19 17:47:10 localhost gconfd (jcd-6843): GConf server is not in use, = shutting down. Feb 19 17:47:10 localhost gconfd (jcd-6843): Exiting # OOPS!!! The pressing of the power button to exist suspend mode # has been detected as a "power button" for OFF!!! # But in this case it is ignored, as I disabled the script at the beginni= ng. Feb 19 17:47:10 localhost logger: ACPI action power is not defined Feb 19 17:47:10 localhost kernel: Restarting tasks... done Feb 19 17:47:10 localhost kernel: Thawing cpus ... Feb 19 17:47:10 localhost kernel: Booting processor 1/1 eip 3000 Feb 19 17:47:10 localhost kernel: CPU 1 irqstacks, hard=3Dc047f000 soft=3D= c0477000 Feb 19 17:47:10 localhost kernel: Initializing CPU#1 Feb 19 17:47:10 localhost kernel: Calibrating delay using timer specific = routine.. 5613.13 BogoMIPS (lpj=3D11226265) Feb 19 17:47:10 localhost kernel: CPU: After generic identify, caps: bfeb= fbff 00000000 00000000 00000000 00004400 00000000 00000000 Feb 19 17:47:10 localhost kernel: CPU: After vendor identify, caps: bfebf= bff 00000000 00000000 00000000 00004400 00000000 00000000 Feb 19 17:47:10 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache:= 8K Feb 19 17:47:10 localhost kernel: CPU: L2 cache: 512K Feb 19 17:47:10 localhost kernel: CPU: Physical Processor ID: 0 Feb 19 17:47:10 localhost kernel: CPU: After all inits, caps: bfebfbff 00= 000000 00000000 00000080 00004400 00000000 00000000 Feb 19 17:47:10 localhost kernel: Intel machine check architecture suppor= ted. Feb 19 17:47:10 localhost kernel: Intel machine check reporting enabled o= n CPU#1. Feb 19 17:47:10 localhost kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (= 12) available Feb 19 17:47:10 localhost kernel: CPU1: Thermal monitoring enabled Feb 19 17:47:10 localhost kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz= stepping 09 Feb 19 17:47:10 localhost kernel: APIC error on CPU1: 00(40) Feb 19 17:47:10 localhost kernel: CPU1 is up Feb 19 17:47:14 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> = GSI 23 (level, low) -> IRQ 185 Feb 19 17:47:14 localhost kernel: PCI: Setting latency timer of device 00= 00:00:1d.7 to 64 Feb 19 17:47:14 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Contro= ller Feb 19 17:47:14 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1 Feb 19 17:47:14 localhost kernel: PCI: cache line size of 128 is not supp= orted by device 0000:00:1d.7 Feb 19 17:47:14 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus regi= stered, assigned bus number 1 Feb 19 17:47:14 localhost kernel: ehci_hcd 0000:00:1d.7: irq 185, io mem = 0xfc100000 Feb 19 17:47:14 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started,= EHCI 1.00, driver 10 Dec 2004 Feb 19 17:47:14 localhost kernel: hub 1-0:1.0: USB hub found Feb 19 17:47:14 localhost kernel: hub 1-0:1.0: 8 ports detected Feb 19 17:47:15 localhost kernel: usb 1-3: new high speed USB device usin= g ehci_hcd and address 2 Feb 19 17:47:15 localhost kernel: hub 1-3:1.0: USB hub found Feb 19 17:47:15 localhost kernel: hub 1-3:1.0: 7 ports detected Feb 19 17:47:15 localhost kernel: usb 1-3.4: new low speed USB device usi= ng ehci_hcd and address 3 Feb 19 17:47:15 localhost kernel: input: Microsoft Microsoft IntelliMouse= =AE Explorer as /class/input/input2 Feb 19 17:47:15 localhost kernel: input: USB HID v1.00 Mouse [Microsoft M= icrosoft IntelliMouse=AE Explorer] on usb-0000:00:1d.7-3.4 --------------030805090502030005000401 Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable --------------030805090502030005000401--