From mboxrd@z Thu Jan 1 00:00:00 1970 From: "H. Peter Anvin" Subject: Re: [rft] s2ram wakeup moves to .c, could fix few machines Date: Thu, 07 Feb 2008 15:14:15 -0800 Message-ID: <47AB90C7.2070205@zytor.com> References: <20080205190600.GB11613@elf.ucw.cz> <20080207222845.GA6096@elf.ucw.cz> <47AB8A41.3040008@zytor.com> <200802072357.33293.rjw@sisk.pl> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------060101040700030303080000" Return-path: In-Reply-To: <200802072357.33293.rjw@sisk.pl> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: "Rafael J. Wysocki" Cc: Linux-pm mailing list , kernel list List-Id: linux-pm@vger.kernel.org This is a multi-part message in MIME format. --------------060101040700030303080000 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Okay, this uses the iodelay as the timesource... here is the total silliness (and totally untested, of course.) -hpa --------------060101040700030303080000 Content-Type: text/x-csrc; name="beep.c" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="beep.c" static inline void io_delay(void) { outb(0, 0x80); } static void udelay(int loops) { while (loops--) io_delay(); /* Approximately 1 us */ } static void beep(unsigned int hz) { u8 enable; if (!hz) { enable = 0x00; /* Turn off speaker */ } else { u16 div = 1193181/hz; outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ io_delay(); outb(div, 0x42); /* LSB of counter */ io_delay(); outb(div >> 8, 0x42); /* MSB of counter */ io_delay(); enable = 0x03; /* Turn on speaker */ } inb(0x61); /* Dummy read of System Control Port B */ io_delay(); outb(enable, 0x61); /* Enable timer 2 output to speaker */ io_delay(); } #define DOT_HZ 880 #define DASH_HZ 587 #define US_PER_DOT 125000 /* Okay, this is totally silly, but it's kind of fun. */ void send_morse(const char *pattern) { char s; while ((s = *pattern++)) { switch (s) { case '.': beep(DOT_HZ); udelay(US_PER_DOT); beep(0); udelay(US_PER_DOT); break; case '-': beep(DASH_HZ); udelay(US_PER_DOT*3); beep(0); udelay(US_PER_DOT); break; default: /* Assume it's a space */ udelay(US_PER_DOT*3); break; } } } --------------060101040700030303080000 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline --------------060101040700030303080000--