From mboxrd@z Thu Jan 1 00:00:00 1970 From: Francesco VIRLINZI Subject: Re: Problem on Suspend to RAM vs ext3 Date: Mon, 16 Jun 2008 15:32:44 +0200 Message-ID: <48566B7C.4090903@st.com> References: <48560D3E.8060303@st.com> <200806161458.22706.rjw@sisk.pl> <485668F9.3080502@st.com> <200806161530.49979.rjw@sisk.pl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200806161530.49979.rjw@sisk.pl> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: "Rafael J. Wysocki" Cc: linux-pm@lists.linux-foundation.org List-Id: linux-pm@vger.kernel.org Hi Rafael I will try to update my kernel > This is a problem with the SATA driver IMO. There's a good chance it's been > fixed in one of the more recent kernels. > > Please try 2.6.25.x. > Thanks for your support Regards Francesco > Thanks, > Rafael > > > >> sd 0:0:1:0: [sda] Starting disk >> ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >> ata1.01: cmd 40/00:01:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 0 >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >> ata1: port is slow to respond, please be patient (Status 0xd0) >> ata1: device not ready (errno=-16), forcing hardreset >> ata1: soft resetting port >> ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) >> ata1.01: revalidation failed (errno=-5) >> ata1: failed to recover some devices, retrying in 5 secs >> ata1: soft resetting port >> ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) >> ata1.01: revalidation failed (errno=-5) >> ata1.01: limiting speed to UDMA7:PIO5 >> ata1: failed to recover some devices, retrying in 5 secs >> ata1: soft resetting port >> ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) >> ata1.01: revalidation failed (errno=-5) >> ata1.01: disabled >> ata1: EH pending after completion, repeating EH (cnt=4) >> ata1: soft resetting port >> ata1: EH complete >> sd 0:0:1:0: [sda] START_STOP FAILED >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> Restarting tasks ... done. >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> end_request: I/O error, dev sda, sector 6042767 >> Buffer I/O error on device sda1, logical block 755338 >> lost page write due to I/O error on sda1 >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> end_request: I/O error, dev sda, sector 6042927 >> Buffer I/O error on device sda1, logical block 755358 >> lost page write due to I/O error on sda1 >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> end_request: I/O error, dev sda, sector 6042839 >> Buffer I/O error on device sda1, logical block 755347 >> lost page write due to I/O error on sda1 >> Aborting journal on device sda1. >> ext3_abort called. >> EXT3-fs error (device sda1): ext3_journal_start_sb: Detected aborted >> journal >> Remounting filesystem read-only >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> end_request: I/O error, dev sda, sector 5767247 >> Buffer I/O error on device sda1, logical block 720898 >> lost page write due to I/O error on sda1 >> sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 >> end_request: I/O error, dev sda, sector 7140655 >> > >