Re: [PATCH 2/2] thermal/drivers/qcom/tsens: Add support for ipq9650 tsens

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 5/15/26 12:18 PM, Varadarajan Narayanan wrote:
> ipq9650's tsens is similar to ipq5332 tsens but has different number of
> sensors. Re-use the ipq5332 data for ipq9650 and modify the sensor
> related information.
> 
> Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
> ---
>  drivers/thermal/qcom/tsens-v2.c | 8 ++++++++
>  drivers/thermal/qcom/tsens.c    | 3 +++
>  drivers/thermal/qcom/tsens.h    | 2 +-
>  3 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
> index 8d9698ea3ec4..ef1fee2266a3 100644
> --- a/drivers/thermal/qcom/tsens-v2.c
> +++ b/drivers/thermal/qcom/tsens-v2.c
> @@ -300,6 +300,14 @@ const struct tsens_plat_data data_ipq5424 = {
>  	.fields		= tsens_v2_regfields,
>  };
>  
> +const struct tsens_plat_data data_ipq9650 = {
> +	.num_sensors	= 11,
> +	.ops		= &ops_ipq5332,
> +	.hw_ids		= (unsigned int []){5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15},

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad