From: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
To: b-cousson@ti.com, kishon@ti.com, kbaidarov@dev.rtsoft.ru,
santosh.shilimkar@ti.com, tony@atomide.com, paul@pwsan.com
Cc: balbi@ti.com, amit.kucheria@linaro.org,
linux-pm@lists.linux-foundation.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
amit.kachhap@linaro.org,
Eduardo Valentin <eduardo.valentin@ti.com>,
Keerthy <j-keerthy@ti.com>
Subject: [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields
Date: Mon, 18 Jun 2012 15:32:29 +0400 [thread overview]
Message-ID: <4FDF11CD.2090101@dev.rtsoft.ru> (raw)
In-Reply-To: <1337934361-1606-1-git-send-email-eduardo.valentin@ti.com>
OMAP4460 specific temperature sensor register bit fields are added.
Existing OMAP4 entries are renamed to OMAP4430.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/mach-omap2/include/mach/control.h | 116 ++++++++++++++++++++++++++++
1 files changed, 116 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/include/mach/control.h b/arch/arm/mach-omap2/include/mach/control.h
index cf42764..171b504 100644
--- a/arch/arm/mach-omap2/include/mach/control.h
+++ b/arch/arm/mach-omap2/include/mach/control.h
@@ -230,6 +230,122 @@
/* OMAP44xx control McBSP padconf */
#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
+/* TEMP_SENSOR OMAP4430 */
+#define OMAP4430_BGAP_TEMPSOFF_SHIFT 12
+#define OMAP4430_BGAP_TEMPSOFF_MASK (1 << 12)
+#define OMAP4430_BGAP_TSHUT_SHIFT 11
+#define OMAP4430_BGAP_TSHUT_MASK (1 << 11)
+#define OMAP4430_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
+#define OMAP4430_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
+#define OMAP4430_BGAP_TEMP_SENSOR_SOC_SHIFT 9
+#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
+#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
+#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
+#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
+#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
+
+/* TEMP_SENSOR OMAP4460 */
+#define OMAP4460_BGAP_TEMPSOFF_SHIFT 13
+#define OMAP4460_BGAP_TEMPSOFF_MASK (1 << 13)
+#define OMAP4460_BGAP_TEMP_SENSOR_SOC_SHIFT 11
+#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK (1 << 11)
+#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
+#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 10)
+#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
+#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
+
+/* BANDGAP_CTRL */
+#define OMAP4460_SINGLE_MODE_SHIFT 31
+#define OMAP4460_SINGLE_MODE_MASK (1 << 31)
+#define OMAP4460_MASK_HOT_SHIFT 1
+#define OMAP4460_MASK_HOT_MASK (1 << 1)
+#define OMAP4460_MASK_COLD_SHIFT 0
+#define OMAP4460_MASK_COLD_MASK (1 << 0)
+
+/* BANDGAP_COUNTER */
+#define OMAP4460_COUNTER_SHIFT 0
+#define OMAP4460_COUNTER_MASK (0xffffff << 0)
+
+/* BANDGAP_THRESHOLD */
+#define OMAP4460_T_HOT_SHIFT 16
+#define OMAP4460_T_HOT_MASK (0x3ff << 16)
+#define OMAP4460_T_COLD_SHIFT 0
+#define OMAP4460_T_COLD_MASK (0x3ff << 0)
+
+/* TSHUT_THRESHOLD */
+#define OMAP4460_TSHUT_HOT_SHIFT 16
+#define OMAP4460_TSHUT_HOT_MASK (0x3ff << 16)
+#define OMAP4460_TSHUT_COLD_SHIFT 0
+#define OMAP4460_TSHUT_COLD_MASK (0x3ff << 0)
+
+/* BANDGAP_STATUS */
+#define OMAP4460_CLEAN_STOP_SHIFT 3
+#define OMAP4460_CLEAN_STOP_MASK (1 << 3)
+#define OMAP4460_BGAP_ALERT_SHIFT 2
+#define OMAP4460_BGAP_ALERT_MASK (1 << 2)
+#define OMAP4460_HOT_FLAG_SHIFT 1
+#define OMAP4460_HOT_FLAG_MASK (1 << 1)
+#define OMAP4460_COLD_FLAG_SHIFT 0
+#define OMAP4460_COLD_FLAG_MASK (1 << 0)
+
+/* TEMP_SENSOR OMAP5430 */
+#define OMAP5430_BGAP_TEMP_SENSOR_SOC_SHIFT 12
+#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK (1 << 12)
+#define OMAP5430_BGAP_TEMPSOFF_SHIFT 11
+#define OMAP5430_BGAP_TEMPSOFF_MASK (1 << 11)
+#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
+#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 10)
+#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
+#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
+
+/* BANDGAP_CTRL */
+#define OMAP5430_MASK_HOT_CORE_SHIFT 5
+#define OMAP5430_MASK_HOT_CORE_MASK (1 << 5)
+#define OMAP5430_MASK_COLD_CORE_SHIFT 4
+#define OMAP5430_MASK_COLD_CORE_MASK (1 << 4)
+#define OMAP5430_MASK_HOT_MM_SHIFT 3
+#define OMAP5430_MASK_HOT_MM_MASK (1 << 3)
+#define OMAP5430_MASK_COLD_MM_SHIFT 2
+#define OMAP5430_MASK_COLD_MM_MASK (1 << 2)
+#define OMAP5430_MASK_HOT_MPU_SHIFT 1
+#define OMAP5430_MASK_HOT_MPU_MASK (1 << 1)
+#define OMAP5430_MASK_COLD_MPU_SHIFT 0
+#define OMAP5430_MASK_COLD_MPU_MASK (1 << 0)
+
+/* BANDGAP_COUNTER */
+#define OMAP5430_REPEAT_MODE_SHIFT 31
+#define OMAP5430_REPEAT_MODE_MASK (1 << 31)
+#define OMAP5430_COUNTER_SHIFT 0
+#define OMAP5430_COUNTER_MASK (0xffffff << 0)
+
+/* BANDGAP_THRESHOLD */
+#define OMAP5430_T_HOT_SHIFT 16
+#define OMAP5430_T_HOT_MASK (0x3ff << 16)
+#define OMAP5430_T_COLD_SHIFT 0
+#define OMAP5430_T_COLD_MASK (0x3ff << 0)
+
+/* TSHUT_THRESHOLD */
+#define OMAP5430_TSHUT_HOT_SHIFT 16
+#define OMAP5430_TSHUT_HOT_MASK (0x3ff << 16)
+#define OMAP5430_TSHUT_COLD_SHIFT 0
+#define OMAP5430_TSHUT_COLD_MASK (0x3ff << 0)
+
+/* BANDGAP_STATUS */
+#define OMAP5430_BGAP_ALERT_SHIFT 31
+#define OMAP5430_BGAP_ALERT_MASK (1 << 31)
+#define OMAP5430_HOT_CORE_FLAG_SHIFT 5
+#define OMAP5430_HOT_CORE_FLAG_MASK (1 << 5)
+#define OMAP5430_COLD_CORE_FLAG_SHIFT 4
+#define OMAP5430_COLD_CORE_FLAG_MASK (1 << 4)
+#define OMAP5430_HOT_MM_FLAG_SHIFT 3
+#define OMAP5430_HOT_MM_FLAG_MASK (1 << 3)
+#define OMAP5430_COLD_MM_FLAG_SHIFT 2
+#define OMAP5430_COLD_MM_FLAG_MASK (1 << 2)
+#define OMAP5430_HOT_MPU_FLAG_SHIFT 1
+#define OMAP5430_HOT_MPU_FLAG_MASK (1 << 1)
+#define OMAP5430_COLD_MPU_FLAG_SHIFT 0
+#define OMAP5430_COLD_MPU_FLAG_MASK (1 << 0)
+
/* AM35XX only CONTROL_GENERAL register offsets */
#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
--
1.7.7.1.488.ge8e1c
next prev parent reply other threads:[~2012-06-18 11:32 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 8:25 [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines Eduardo Valentin
2012-05-28 9:12 ` Shilimkar, Santosh
2012-05-25 8:25 ` [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area Eduardo Valentin
2012-05-28 9:25 ` Shilimkar, Santosh
2012-05-28 10:30 ` Valentin, Eduardo
2012-06-01 11:19 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 03/11] arm: omap: device: create a device for system control module Eduardo Valentin
2012-05-25 12:30 ` Cousson, Benoit
2012-05-29 9:44 ` Eduardo Valentin
2012-06-14 13:50 ` Konstantin Baydarov
2012-06-15 9:22 ` Valentin, Eduardo
2012-05-29 13:39 ` Konstantin Baydarov
2012-05-25 8:25 ` [RFC PATCH 04/11] OMAP: Add early " Eduardo Valentin
2012-05-25 11:32 ` Konstantin Baydarov
2012-05-25 11:44 ` Valentin, Eduardo
2012-05-25 11:54 ` Konstantin Baydarov
2012-05-25 12:32 ` Cousson, Benoit
2012-05-28 9:58 ` Shilimkar, Santosh
2012-05-25 8:25 ` [RFC PATCH 05/11] mfd: omap: control: core system control driver Eduardo Valentin
2012-05-25 12:52 ` Cousson, Benoit
2012-05-28 11:35 ` Eduardo Valentin
2012-05-29 13:25 ` Cousson, Benoit
2012-06-01 11:29 ` Tony Lindgren
2012-06-01 12:30 ` Shilimkar, Santosh
2012-06-01 12:43 ` Cousson, Benoit
2012-06-01 17:19 ` Eduardo Valentin
2012-06-01 13:40 ` Konstantin Baydarov
2012-06-01 14:13 ` Tony Lindgren
2012-06-01 14:26 ` Konstantin Baydarov
2012-05-28 9:54 ` Shilimkar, Santosh
2012-05-28 11:42 ` Eduardo Valentin
2012-05-28 13:15 ` Shilimkar, Santosh
2012-05-29 13:31 ` Cousson, Benoit
2012-05-25 8:25 ` [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type Eduardo Valentin
2012-05-25 12:53 ` Cousson, Benoit
2012-05-28 10:02 ` Shilimkar, Santosh
2012-05-28 11:24 ` Eduardo Valentin
2012-06-01 11:35 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Eduardo Valentin
2012-05-25 13:35 ` Shubhrajyoti Datta
2012-05-25 15:06 ` Cousson, Benoit
2012-06-01 11:38 ` Tony Lindgren
2012-06-01 13:20 ` [linux-pm] " Tony Lindgren
2012-06-01 14:07 ` Kevin Hilman
2012-06-01 14:15 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Eduardo Valentin
2012-05-25 15:13 ` Cousson, Benoit
2012-05-28 11:17 ` Eduardo Valentin
2012-05-28 10:04 ` Shilimkar, Santosh
2012-05-28 11:18 ` Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Eduardo Valentin
2012-05-25 15:49 ` Cousson, Benoit
2012-05-28 11:06 ` Eduardo Valentin
2012-05-28 11:16 ` Eduardo Valentin
2012-05-29 13:14 ` Cousson, Benoit
2012-05-29 17:51 ` Mike Turquette
2012-05-25 16:39 ` Konstantin Baydarov
2012-05-28 10:55 ` Eduardo Valentin
2012-06-01 11:42 ` Tony Lindgren
2012-05-25 8:26 ` [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone Eduardo Valentin
2012-05-28 9:33 ` Shilimkar, Santosh
2012-05-28 9:48 ` Felipe Balbi
2012-05-28 10:26 ` Valentin, Eduardo
2012-05-29 12:54 ` Cousson, Benoit
2012-05-25 8:26 ` [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4 Eduardo Valentin
2012-05-29 9:49 ` Konstantin Baydarov
2012-05-30 8:38 ` Cousson, Benoit
2012-05-30 9:05 ` Konstantin Baydarov
2012-05-30 9:26 ` Cousson, Benoit
2012-05-30 10:17 ` Konstantin Baydarov
2012-05-30 10:22 ` Cousson, Benoit
2012-05-30 10:42 ` Eduardo Valentin
2012-05-30 12:16 ` Cousson, Benoit
2012-05-31 12:06 ` Konstantin Baydarov
2012-05-31 12:49 ` Eduardo Valentin
2012-05-31 12:52 ` Cousson, Benoit
2012-05-31 14:51 ` Konstantin Baydarov
2012-05-25 8:35 ` [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 10:50 ` Konstantin Baydarov
2012-05-25 11:11 ` Valentin, Eduardo
2012-05-25 12:21 ` Konstantin Baydarov
2012-06-01 0:12 ` [linux-pm] " Kevin Hilman
2012-06-18 11:32 ` [RFC PATCH v2 01/11] ARM: OMAP4: Remove un-used control module headers and defines Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area Konstantin Baydarov
2012-06-20 10:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 03/11] mfd: omap: control: core system control driver Konstantin Baydarov
2012-06-20 10:22 ` Tony Lindgren
2012-06-20 14:13 ` Konstantin Baydarov
2012-06-26 11:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type Konstantin Baydarov
2012-06-20 10:24 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 05/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Konstantin Baydarov
2012-06-18 11:32 ` Konstantin Baydarov [this message]
2012-06-20 10:25 ` [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 07/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 08/11] omap4: thermal: add basic CPU thermal zone Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4 Konstantin Baydarov
2012-06-18 12:13 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FDF11CD.2090101@dev.rtsoft.ru \
--to=kbaidarov@dev.rtsoft.ru \
--cc=amit.kachhap@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=eduardo.valentin@ti.com \
--cc=j-keerthy@ti.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=paul@pwsan.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).