From: Apostolos Bartziokas <barz621@gmail.com>
To: linux-pm@lists.linux-foundation.org
Subject: firewire_ohci resume failure on intel HW
Date: Tue, 28 Aug 2012 16:08:15 +0300 [thread overview]
Message-ID: <503CC2BF.2010901@gmail.com> (raw)
Hello
I am trying to get rid of SUSPEND_MODULES from my system and
firewire_ohci prevents the system from resuming when i suspend.
If i remove the modules file i end up wit a blinking cursor on a blank
screen.
This was also the case with kernels 3.3 and 3.4.
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network
Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller
(rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset
Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
Barts PRO [Radeon HD 6800 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Barts HDMI
Audio [Radeon HD 6800 Series]
03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
04:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A
IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev 04)
06:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA
6Gb/s Controller (rev 11)
uname -a
Linux mainland 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012
x86_64 GNU/Linux
I also see this error on my logs but i don't know if it is related to this.
Pid: 0, comm: swapper/0 Not tainted 3.5.3-1-ARCH #1
[ 3.143506] Call Trace:
[ 3.143507] <IRQ> [<ffffffff810d4d3d>] __report_bad_irq+0x3d/0xe0
[ 3.143513] [<ffffffff810d5033>] note_interrupt+0x1a3/0x1f0
[ 3.143515] [<ffffffff810d292f>] handle_irq_event_percpu+0xbf/0x260
[ 3.143516] [<ffffffff810d2b18>] handle_irq_event+0x48/0x70
[ 3.143518] [<ffffffff810d5b4a>] handle_fasteoi_irq+0x5a/0x100
[ 3.143520] [<ffffffff810160c2>] handle_irq+0x22/0x40
[ 3.143522] [<ffffffff81484cea>] do_IRQ+0x5a/0xe0
[ 3.143524] [<ffffffff8147c12a>] common_interrupt+0x6a/0x6a
[ 3.143524] <EOI> [<ffffffffa02b3f01>] ?
acpi_idle_enter_c1+0xda/0x104 [processor]
[ 3.143537] [<ffffffffa02b3edc>] ? acpi_idle_enter_c1+0xb5/0x104
[processor]
[ 3.143541] [<ffffffff8134f159>] cpuidle_enter+0x19/0x20
[ 3.143542] [<ffffffff8134f7a6>] cpuidle_idle_call+0xa6/0x330
[ 3.143544] [<ffffffff8101daaf>] cpu_idle+0xbf/0x130
[ 3.143546] [<ffffffff81456fbc>] rest_init+0x80/0x84
[ 3.143548] [<ffffffff818bbc35>] start_kernel+0x3c1/0x3ce
[ 3.143550] [<ffffffff818bb673>] ? repair_env_string+0x5e/0x5e
[ 3.143551] [<ffffffff818bb356>] x86_64_start_reservations+0x131/0x135
[ 3.143553] [<ffffffff818bb45a>] x86_64_start_kernel+0x100/0x10f
Thanks in advance.
reply other threads:[~2012-08-28 13:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=503CC2BF.2010901@gmail.com \
--to=barz621@gmail.com \
--cc=linux-pm@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).