linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aaron Lu <aaron.lu@intel.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-acpi@vger.kernel.org, Aaron Lu <aaron.lwe@gmail.com>,
	Jeff Wu <jeff.wu@amd.com>, Tejun Heo <tj@kernel.org>,
	"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: [PATCH v2 2/2] libata: PM code cleanup for ata port
Date: Fri, 25 Jan 2013 14:32:25 +0800	[thread overview]
Message-ID: <510226F9.5000709@intel.com> (raw)
In-Reply-To: <20130125062935.GA9779@aaronlu.sh.intel.com>

For system freeze, if the port is already runtime suspended, leave it
alone and just return. The port will be resumed on thaw before it will
be used.

And since we will call get_noresume for every device during prepare
phase, and the port is resumed during thaw phase, it can't be in runtime
suspended state during the poweroff phase. So remove the
runtime_suspended check in poweroff callback.

And for all suspend(freeze/suspend/poweroff/etc.), there is no need to
touch the device, so set no_autopsy and no_recovery for them all.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
---
 drivers/ata/libata-core.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6a5ef86..439c608 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5334,9 +5334,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 
 static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
 {
-	unsigned int ehi_flags = ATA_EHI_QUIET;
-	int rc;
-
 	/*
 	 * On some hardware, device fails to respond after spun down
 	 * for suspend.  As the device won't be used before being
@@ -5345,11 +5342,9 @@ static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int
 	 *
 	 * http://thread.gmane.org/gmane.linux.ide/46764
 	 */
-	if (mesg.event & PM_EVENT_SUSPEND)
-		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
-
-	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
-	return rc;
+	unsigned int ehi_flags = ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY |
+				 ATA_EHI_NO_RECOVERY;
+	return ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
 }
 
 static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
@@ -5370,16 +5365,13 @@ static int ata_port_suspend(struct device *dev)
 static int ata_port_do_freeze(struct device *dev)
 {
 	if (pm_runtime_suspended(dev))
-		pm_runtime_resume(dev);
+		return 0;
 
 	return ata_port_suspend_common(dev, PMSG_FREEZE);
 }
 
 static int ata_port_poweroff(struct device *dev)
 {
-	if (pm_runtime_suspended(dev))
-		return 0;
-
 	return ata_port_suspend_common(dev, PMSG_HIBERNATE);
 }
 
-- 
1.8.1


  reply	other threads:[~2013-01-25  6:31 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1346143791-2995-1-git-send-email-aaron.lu@intel.com>
2013-01-21 20:44 ` [PATCH] libata: pm: differentiate system and runtime pm for ata port Jeff Garzik
2013-01-22  8:48   ` Aaron Lu
2013-01-25  6:29   ` [PATCH v2 1/2] " Aaron Lu
2013-01-25  6:32     ` Aaron Lu [this message]
2013-01-25 11:33       ` [PATCH v2 2/2] libata: PM code cleanup " Sergei Shtylyov
2013-01-25 12:29         ` Rafael J. Wysocki
2013-01-25 20:34       ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=510226F9.5000709@intel.com \
    --to=aaron.lu@intel.com \
    --cc=aaron.lwe@gmail.com \
    --cc=jeff.wu@amd.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).