From: Tobiasz 'dotnokato' Jarczyk <dotnokato@prokonto.pl>
To: linux-pm@vger.kernel.org
Subject: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure
Date: Fri, 03 Jan 2014 22:12:17 +0100 [thread overview]
Message-ID: <52C727B1.9050102@prokonto.pl> (raw)
Hi,
I want to report an issue with suspend failing on my laptop (HP Compaq
nx6325) when using kernel 3.13-rc6.
[1.] One line summary of the problem:
[Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure
[2.] Full description of the problem/report:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1175504
Laptop fails to suspend to RAM after being waken up from such a suspend
(always hangs during second suspend).
To reproduce on my laptop HP Compaq nx6325 EY349EA#AKD:
1. Suspend to RAM.
2. Wake up from suspend.
3. Suspend to RAM again.
4. During this suspend computer hangs - monitor is blank, power light is
on, processor becomes very hot so the cooler is on full speed. At this
point I have to hard reset it.
ProblemType: KernelOops
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-19-generic 3.8.0-19.29
ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
Uname: Linux 3.8.0-19-generic x86_64
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
ApportVersion: 2.9.2-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: dotnokato 1756 F.... pulseaudio
Date: Thu May 2 10:11:29 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=UUID=ce4acd9b-ecba-4931-baa2-0c2d6409dbf6
InstallationDate: Installed on 2012-10-06 (207 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20120926)
InterpreterPath: /usr/bin/python3.3
Lsusb:
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint
Sensor
Bus 003 Device 003: ID 04b4:0033 Cypress Semiconductor Corp. Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)
MarkForUpload: True
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
TERM=linux
PATH=(custom, no user)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic
root=UUID=4f0c1391-e243-4e37-aaab-52625df3e3bd ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.8.0-19-generic N/A
linux-backports-modules-3.8.0-19-generic N/A
linux-firmware 1.106
SourcePackage: linux
Title: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume
failure
UpgradeStatus: Upgraded to raring on 2013-03-09 (53 days ago)
UserGroups:
dmi.bios.date: 05/08/2007
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 68TT2 Ver. F.07
dmi.board.name: 30B0
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 40.15
dmi.chassis.asset.tag: CNU7110B09
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias:
dmi:bvnHewlett-Packard:bvr68TT2Ver.F.07:bd05/08/2007:svnHewlett-Packard:pnHPCompaqnx6325(EY349EA#AKD):pvrF.07:rvnHewlett-Packard:rn30B0:rvrKBCVersion40.15:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP Compaq nx6325 (EY349EA#AKD)
dmi.product.version: F.07
dmi.sys.vendor: Hewlett-Packard
[3.] Keywords (i.e., modules, networking, kernel):
[4.] Kernel version (from /proc/version):
$ cat /proc/version
Linux version 3.13.0-031300rc6-generic (apw@gomeisa) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201312291935 SMP Mon Dec 30 00:37:05
UTC 2013
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the problem
(if possible)
[7.] Environment
$ lsb_release -rd
Description: Ubuntu Trusty Tahr (development branch)
Release: 14.04
[7.1.] Software (add the output of the ver_linux script here)
$ sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux none 3.13.0-031300rc6-generic #201312291935 SMP Mon Dec 30
00:37:05 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Gnu C 4.8
Gnu make 3.81
binutils 2.24
util-linux 2.20.1
mount support
module-init-tools 15
e2fsprogs 1.42.9
pcmciautils 018
PPP 2.4.5
Linux C Library 2.18
Dynamic linker (ldd) 2.18
Procps 3.3.8
Net-tools 1.60
Kbd 1.15.5
Sh-utils 8.21
wireless-tools 30
Modules Loaded ctr ccm bnep rfcomm bluetooth binfmt_misc joydev
hp_wmi sparse_keymap ppdev arc4 kvm_amd b43 tpm_infineon kvm
snd_hda_codec_analog radeon snd_hda_intel snd_hda_codec bcma mac80211
snd_hwdep snd_pcm psmouse snd_page_alloc snd_seq_midi cfg80211 pcmcia
serio_raw snd_seq_midi_event snd_rawmidi snd_seq ttm edac_core
snd_seq_device k8temp drm_kms_helper snd_timer ssb_hcd edac_mce_amd
yenta_socket drm tifm_7xx1 snd pcmcia_rsrc tifm_core pcmcia_core
i2c_algo_bit soundcore wmi shpchp i2c_piix4 tpm_tis video parport_pc
mac_hid lp parport hid_generic usbhid hid pata_acpi tg3 sdhci_pci sdhci
ptp pps_core pata_atiixp ssb sata_sil
[7.2.] Processor information (from /proc/cpuinfo):
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
rdtscp lm 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm
cmp_legacy svm extapic cr8_legacy
bogomips : 1596.05
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
rdtscp lm 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm
cmp_legacy svm extapic cr8_legacy
bogomips : 1596.05
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
[7.3.] Module information (from /proc/modules):
$ cat /proc/modules
ctr 13193 1 - Live 0x0000000000000000
ccm 17856 1 - Live 0x0000000000000000
bnep 19884 2 - Live 0x0000000000000000
rfcomm 74748 0 - Live 0x0000000000000000
bluetooth 411140 10 bnep,rfcomm, Live 0x0000000000000000
binfmt_misc 17508 1 - Live 0x0000000000000000
joydev 17575 0 - Live 0x0000000000000000
hp_wmi 18202 0 - Live 0x0000000000000000
sparse_keymap 13890 1 hp_wmi, Live 0x0000000000000000
ppdev 17711 0 - Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
kvm_amd 60554 0 - Live 0x0000000000000000
b43 397438 0 - Live 0x0000000000000000
tpm_infineon 17410 0 - Live 0x0000000000000000
kvm 468147 1 kvm_amd, Live 0x0000000000000000
snd_hda_codec_analog 14930 1 - Live 0x0000000000000000
radeon 1565590 3 - Live 0x0000000000000000
snd_hda_intel 57222 5 - Live 0x0000000000000000
snd_hda_codec 199156 2 snd_hda_codec_analog,snd_hda_intel, Live
0x0000000000000000
bcma 52421 1 b43, Live 0x0000000000000000
mac80211 654078 1 b43, Live 0x0000000000000000
snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
snd_pcm 107140 3 snd_hda_intel,snd_hda_codec, Live 0x0000000000000000
psmouse 108513 0 - Live 0x0000000000000000
snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
cfg80211 509407 2 b43,mac80211, Live 0x0000000000000000
pcmcia 62760 0 - Live 0x0000000000000000
serio_raw 13462 0 - Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30465 1 snd_seq_midi, Live 0x0000000000000000
snd_seq 66061 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
ttm 89884 1 radeon, Live 0x0000000000000000
edac_core 62944 0 - Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
0x0000000000000000
k8temp 13064 0 - Live 0x0000000000000000
drm_kms_helper 53224 1 radeon, Live 0x0000000000000000
snd_timer 30038 2 snd_pcm,snd_seq, Live 0x0000000000000000
ssb_hcd 12909 0 - Live 0x0000000000000000
edac_mce_amd 22792 0 - Live 0x0000000000000000
yenta_socket 45434 0 - Live 0x0000000000000000
drm 308397 5 radeon,ttm,drm_kms_helper, Live 0x0000000000000000
tifm_7xx1 13418 0 - Live 0x0000000000000000
snd 73850 19
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
Live 0x0000000000000000
pcmcia_rsrc 18591 1 yenta_socket, Live 0x0000000000000000
tifm_core 15771 1 tifm_7xx1, Live 0x0000000000000000
pcmcia_core 23715 3 pcmcia,yenta_socket,pcmcia_rsrc, Live 0x0000000000000000
i2c_algo_bit 13564 1 radeon, Live 0x0000000000000000
soundcore 12680 1 snd, Live 0x0000000000000000
wmi 19363 1 hp_wmi, Live 0x0000000000000000
shpchp 37201 0 - Live 0x0000000000000000
i2c_piix4 22299 0 - Live 0x0000000000000000
tpm_tis 19116 0 - Live 0x0000000000000000
video 19859 0 - Live 0x0000000000000000
parport_pc 36962 1 - Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
parport 42481 3 ppdev,parport_pc,lp, Live 0x0000000000000000
hid_generic 12548 0 - Live 0x0000000000000000
usbhid 53067 0 - Live 0x0000000000000000
hid 106254 2 hid_generic,usbhid, Live 0x0000000000000000
pata_acpi 13038 0 - Live 0x0000000000000000
tg3 174880 0 - Live 0x0000000000000000
sdhci_pci 19241 0 - Live 0x0000000000000000
sdhci 43409 1 sdhci_pci, Live 0x0000000000000000
ptp 18980 1 tg3, Live 0x0000000000000000
pps_core 19381 1 ptp, Live 0x0000000000000000
pata_atiixp 13271 0 - Live 0x0000000000000000
ssb 63241 2 b43,ssb_hcd, Live 0x0000000000000000
sata_sil 13550 3 - Live 0x0000000000000000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
$ cat /proc/ioports
0000-ffff : PCI Bus #00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:14.1
0170-0177 : pata_atiixp
01f0-01f7 : 0000:00:14.1
01f0-01f7 : pata_atiixp
0376-0376 : 0000:00:14.1
0376-0376 : pata_atiixp
0378-037a : parport0
037b-037f : parport0
03f6-03f6 : 0000:00:14.1
03f6-03f6 : pata_atiixp
040b-040b : pnp 00:09
04d0-04d1 : pnp 00:09
04d6-04d6 : pnp 00:09
0500-051f : pnp 00:09
0c00-0c01 : pnp 00:09
0c14-0c14 : pnp 00:09
0c50-0c51 : pnp 00:09
0c52-0c52 : pnp 00:09
0c6c-0c6c : pnp 00:09
0c6f-0c6f : pnp 00:09
0cd4-0cdf : pnp 00:09
0cf8-0cff : PCI conf1
1000-1fff : PCI Bus 0000:02
1000-10ff : PCI CardBus 0000:03
1400-14ff : PCI CardBus 0000:03
6000-6fff : PCI Bus 0000:01
6000-60ff : 0000:01:05.0
7018-701b : 0000:00:12.0
7020-702f : 0000:00:12.0
7040-704f : 0000:00:14.1
7040-704f : pata_atiixp
8000-8003 : ACPI PM1a_EVT_BLK
8004-8005 : ACPI PM1a_CNT_BLK
8008-800b : ACPI PM_TMR
8010-8015 : ACPI CPU throttle
8020-8027 : ACPI GPE0_BLK
8100-811f : pnp 00:0a
8100-8100 : ACPI PM2_CNT_BLK
8104-8107 : ACPI PM1b_EVT_BLK
8200-820f : 0000:00:14.0
8200-8207 : piix4_smbus
9000-9007 : 0000:00:12.0
9008-900b : 0000:00:12.0
9010-9017 : 0000:00:12.0
$ cat /proc/iomem
00000000-00000fff : reserved
00001000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : PCI Bus #00
000c0000-000cffff : Video ROM
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-77fcffff : System RAM
01000000-01770f9d : Kernel code
01770f9e-01d1bf3f : Kernel data
01e78000-01fdcfff : Kernel bss
77fd0000-77fe55ff : reserved
77fe5600-77ff7fff : ACPI Non-volatile Storage
77ff8000-7fffffff : reserved
78000000-7fffffff : pnp 00:0b
80000000-fcffffffff : PCI Bus #00
80000000-83ffffff : PCI Bus 0000:02
80000000-83ffffff : PCI CardBus 0000:03
84000000-8407ffff : 0000:00:12.0
84080000-84083fff : 0000:00:14.2
84080000-84083fff : ICH HD audio
88000000-8bffffff : PCI CardBus 0000:03
c0000000-c7ffffff : PCI Bus 0000:01
c0000000-c7ffffff : 0000:01:05.0
c0000000-c02fffff : BOOTFB
c8000000-c80fffff : PCI Bus 0000:30
c8000000-c8003fff : 0000:30:00.0
c8000000-c8003fff : b43-pci-bridge
d4000000-d42fffff : PCI Bus 0000:02
d4000000-d400ffff : 0000:02:01.0
d4000000-d400ffff : tg3
d4010000-d4010fff : 0000:02:04.0
d4010000-d4010fff : yenta_socket
d4018000-d4018fff : 0000:02:04.2
d4018000-d4018fff : tifm_7xx1
d4019000-d40190ff : 0000:02:04.3
d4019000-d40190ff : mmc0
d4300000-d43fffff : PCI Bus 0000:01
d4300000-d430ffff : 0000:01:05.0
d4320000-d433ffff : 0000:01:05.0
d4401000-d4401fff : 0000:00:13.0
d4401000-d4401fff : ohci_hcd
d4402000-d4402fff : 0000:00:13.1
d4402000-d4402fff : ohci_hcd
d4403000-d4403fff : 0000:00:13.2
d4403000-d4403fff : ehci_hcd
d4404000-d44043ff : 0000:00:14.0
d4409000-d44091ff : 0000:00:12.0
d4409000-d44091ff : sata_sil
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:0a
fec00000-fec01fff : reserved
fec00000-fec003ff : IOAPIC 0
fee00000-fee00fff : Local APIC
fee00000-fee00fff : pnp 00:0b
ffbc0000-ffcbffff : reserved
fff00000-ffffffff : reserved
fff00000-ffffffff : pnp 00:09
[7.5.] PCI information ('lspci -vvv' as root)
$ sudo lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI]
RS480/RS482/RS485 Host Bridge (rev 10)
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Bridge [int gfx] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d4300000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30b0
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Express Port 3 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c8000000-c80fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30b0
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: pcieport
00:12.0 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9008 [size=4]
Region 2: I/O ports at 9010 [size=8]
Region 3: I/O ports at 7018 [size=4]
Region 4: I/O ports at 7020 [size=16]
Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 84000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: sata_sil
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d4401000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d4402000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d4403000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 SMBus
Controller (rev 82)
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8200 [size=16]
Region 1: Memory at d4404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
IDE Controller (rev 80) (prog-if 82 [Master PriP])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 7040 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
High Definition Audio Controller (rev 01)
Subsystem: Device 30b0:103c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 84080000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
PCI-ISA Bridge (rev 80)
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d4000000-d42fffff
Prefetchable memory behind bridge: 80000000-83ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=8 IsocEn- LSEn+ ExtCTL- 64b+
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] RS482M [Mobility Radeon Xpress 200] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 6000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d4320000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: radeon
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company Device 30b0
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: ffeebbddfffaa5f8 Data: 7bf7
Kernel driver in use: tg3
02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4010000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83ffffff (prefetchable)
Memory window 1: 88000000-8bffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4018000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: tifm_7xx1
02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
Compliant SD Host Controller
Subsystem: Hewlett-Packard Company Device 30b0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4019000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sdhci-pci
30:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g
(rev 01)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency
L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: b43-pci-bridge
[7.6.] SCSI information (from /proc/scsi/scsi)
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HGST HTS725050A7 Rev: GH2Z
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: DVDRAM GSA-T10N Rev: PC05
Type: CD-ROM ANSI SCSI revision: 05
[7.7.] Other information that might be relevant to the problem (please
look in /proc and include all information that you think to be relevant):
$ ls /proc
1 1048 12 1246 142 1494 1564 1624 1992 23 27 34 39
604 801 974 crypto ioports mdstat scsi tty
10 1052 1209 125 1426 1496 1568 17 2 2343 271 35
390 656 824 978 devices irq meminfo self
uptime
1002 1064 121 126 143 15 1575 1710 20 24 28 353 393
684 854 991 diskstats kallsyms misc slabinfo
version
1007 1087 122 1271 1432 1510 1580 1744 2013 2468 29 359
413 7 855 acpi dma kcore modules
softirqs vmallocinfo
1008 11 1221 13 1438 1521 1584 1748 2028 2477 3 36
479 718 867 asound driver key-users mounts
stat vmstat
1017 1110 1222 1315 1442 1527 1586 1749 21 2497 30 368
5 72 876 buddyinfo execdomains kmsg mtrr swaps
zoneinfo
1026 1116 1225 1325 1445 1531 1589 1785 2129 25 31 37 51
727 9 bus fb kpagecount net sys
1028 1164 1231 14 1447 1533 1590 19 2141 2500 3162 370
52 73 917 cgroups filesystems kpageflags pagetypeinfo
sysrq-trigger
1034 1176 1233 141 1451 1539 16 1970 2184 2558 3193 377
53 792 930 cmdline fs latency_stats partitions sysvipc
1035 1180 1236 1412 1466 1552 1613 1975 22 26 3202 38 557
794 962 consoles interrupts loadavg sched_debug timer_list
1045 1186 1239 1417 1470 1555 1618 1981 2252 265 33 387
558 8 968 cpuinfo iomem locks schedstat timer_stats
[X.] Other notes, patches, fixes, workarounds:
--
Pozdrawiam / Regards
Tobiasz "dotnokato" Jarczyk
next reply other threads:[~2014-01-03 21:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-03 21:12 Tobiasz 'dotnokato' Jarczyk [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-08-13 12:15 [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure Tobiasz 'dotnokato' Jarczyk
2013-08-13 13:32 ` Rafael J. Wysocki
2013-08-13 13:29 ` Tobiasz 'dotnokato' Jarczyk
2013-08-13 22:42 ` Rafael J. Wysocki
2013-08-14 9:20 ` Tobiasz 'dotnokato' Jarczyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52C727B1.9050102@prokonto.pl \
--to=dotnokato@prokonto.pl \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).