From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stratos Karafotis Subject: [PATCH RESEND] cpufreq: Break out early when frequency equals target_freq Date: Wed, 14 May 2014 21:05:52 +0300 Message-ID: <5373B080.3050907@semaphore.gr> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from sema.semaphore.gr ([78.46.194.137]:46114 "EHLO sema.semaphore.gr" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750741AbaENSF5 (ORCPT ); Wed, 14 May 2014 14:05:57 -0400 Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: "Rafael J. Wysocki" , Viresh Kumar Cc: "linux-pm@vger.kernel.org" , LKML Many drivers keep frequencies in frequency table in ascending or descending order. When governor tries to change to policy->min or policy->max respectively then the cpufreq_frequency_table_target could return on first iteration. This will save some iteration cycles. So, break out early when a frequency in cpufreq_frequency_table equals to target one. Testing this during kernel compilation using ondemand governor with a frequency table in ascending order, the cpufreq_frequency_table_target returned early on the first iteration at about 30% of times called. Signed-off-by: Stratos Karafotis --- drivers/cpufreq/freq_table.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index 8e518c6..1632981 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -137,9 +137,13 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, i = pos - table; if ((freq < policy->min) || (freq > policy->max)) continue; + if (freq == target_freq) { + optimal.driver_data = i; + break; + } switch (relation) { case CPUFREQ_RELATION_H: - if (freq <= target_freq) { + if (freq < target_freq) { if (freq >= optimal.frequency) { optimal.frequency = freq; optimal.driver_data = i; @@ -152,7 +156,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, } break; case CPUFREQ_RELATION_L: - if (freq >= target_freq) { + if (freq > target_freq) { if (freq <= optimal.frequency) { optimal.frequency = freq; optimal.driver_data = i; -- 1.9.0