From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Lezcano Subject: Re: [PATCH v4 6/9] ARM: at91: time: move the system timer driver to drivers/clocksource Date: Fri, 06 Mar 2015 09:36:01 +0100 Message-ID: <54F966F1.4090900@linaro.org> References: <1425570594-13124-1-git-send-email-alexandre.belloni@free-electrons.com> <1425570594-13124-7-git-send-email-alexandre.belloni@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1425570594-13124-7-git-send-email-alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Sender: linux-watchdog-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Alexandre Belloni , Nicolas Ferre Cc: Boris Brezillon , Jean-Christophe Plagniol-Villard , Thomas Gleixner , Lee Jones , Wim Van Sebroeck , Guenter Roeck , Sebastian Reichel , Dmitry Eremin-Solenikov , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-pm@vger.kernel.org On 03/05/2015 04:49 PM, Alexandre Belloni wrote: > Import at91rm9200_time.c from mach-at91 as timer-atmel-st.c. Further = cleanup is > required to get rid of the mach-at91 headers. > > Signed-off-by: Alexandre Belloni > Acked-by: Boris Brezillon > --- > arch/arm/mach-at91/Makefile = | 2 +- > drivers/clocksource/Kconfig = | 4 ++++ > drivers/clocksource/Makefile = | 1 + > .../at91rm9200_time.c =3D> drivers/clocksource/timer-atmel-st.c = | 0 > 4 files changed, 6 insertions(+), 1 deletion(-) > rename arch/arm/mach-at91/at91rm9200_time.c =3D> drivers/clocksourc= e/timer-atmel-st.c (100%) > > diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefil= e > index 827fdbcce1c7..963c29169242 100644 > --- a/arch/arm/mach-at91/Makefile > +++ b/arch/arm/mach-at91/Makefile > @@ -7,7 +7,7 @@ obj-y :=3D setup.o > obj-$(CONFIG_SOC_AT91SAM9) +=3D sam9_smc.o > > # CPU-specific support > -obj-$(CONFIG_SOC_AT91RM9200) +=3D at91rm9200.o at91rm9200_time.o > +obj-$(CONFIG_SOC_AT91RM9200) +=3D at91rm9200.o > obj-$(CONFIG_SOC_AT91SAM9) +=3D at91sam9.o > obj-$(CONFIG_SOC_SAMA5) +=3D sama5.o > > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfi= g > index 1c2506f68122..d1d15985a4ec 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -138,6 +138,10 @@ config ATMEL_PIT > select CLKSRC_OF if OF > def_bool SOC_AT91SAM9 || SOC_SAMA5 > > +config ATMEL_ST > + select CLKSRC_OF if OF > + def_bool SOC_AT91RM9200 > + H Alexandre, the global policy is to enable the timer from the platform Kconfig. So it should be: config ATMEL_ST bool select CLKSRC_OF if OF and change the mach's Kconfig to select this driver for the=20 corresponding platform. > config CLKSRC_METAG_GENERIC > def_bool y if METAG > help > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makef= ile > index 752d5c70b0ef..5b85f6adb258 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -1,5 +1,6 @@ > obj-$(CONFIG_CLKSRC_OF) +=3D clksrc-of.o > obj-$(CONFIG_ATMEL_PIT) +=3D timer-atmel-pit.o > +obj-$(CONFIG_ATMEL_ST) +=3D timer-atmel-st.o > obj-$(CONFIG_ATMEL_TCB_CLKSRC) +=3D tcb_clksrc.o > obj-$(CONFIG_X86_PM_TIMER) +=3D acpi_pm.o > obj-$(CONFIG_SCx200HR_TIMER) +=3D scx200_hrt.o > diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/drivers/clocksour= ce/timer-atmel-st.c > similarity index 100% > rename from arch/arm/mach-at91/at91rm9200_time.c > rename to drivers/clocksource/timer-atmel-st.c > --=20 Linaro.org =E2=94=82 Open source software fo= r ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-watchdo= g" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html