linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Peter Zijlstra <peterz@infradead.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/4] sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
Date: Mon, 04 May 2015 16:49:50 +0200	[thread overview]
Message-ID: <5547870E.6060308@linaro.org> (raw)
In-Reply-To: <1728148.BeERL39LLY@vostro.rjw.lan>

On 05/04/2015 03:57 PM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Since cpuidle_reflect() should only be called if the idle state
> to enter was selected by cpuidle_select(), there is the "reflect"
> variable in cpuidle_idle_call() whose value is used to determine
> whether or not that is the case.
>
> However, if the entire code run between the conditional setting
> "reflect" and the call to cpuidle_reflect() is moved to a separate
> function, it will be possible to call that new function in both
> branches of the conditional, in which case cpuidle_reflect() will
> only need to be called from one of them too and the "reflect"
> variable won't be necessary any more.
>
> This eliminates one check made by cpuidle_idle_call() on the majority
> of its invocations, so change the code as described.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---
>   kernel/sched/idle.c |   90 ++++++++++++++++++++++++++--------------------------
>   1 file changed, 46 insertions(+), 44 deletions(-)
>
> Index: linux-pm/kernel/sched/idle.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/idle.c
> +++ linux-pm/kernel/sched/idle.c
> @@ -78,6 +78,46 @@ static void default_idle_call(void) {
>   		arch_cpu_idle();
>   }
>
> +static int call_cpuidle(struct cpuidle_driver *drv, struct cpuidle_device *dev,
> +		      int next_state)
> +{
> +	int entered_state;
> +
> +	/* Fall back to the default arch idle method on errors. */
> +	if (next_state < 0) {
> +		default_idle_call();
> +		return next_state;
> +	}
> +
> +	/*
> +	 * The idle task must be scheduled, it is pointless to go to idle, just
> +	 * update no idle residency and return.
> +	 */
> +	if (current_clr_polling_and_test()) {
> +		dev->last_residency = 0;
> +		local_irq_enable();
> +		return -EBUSY;
> +	}
> +
> +	/* Take note of the planned idle state. */
> +	idle_set_state(this_rq(), &drv->states[next_state]);
> +
> +	/*
> +	 * Enter the idle state previously returned by the governor decision.
> +	 * This function will block until an interrupt occurs and will take
> +	 * care of re-enabling the local interrupts
> +	 */
> +	entered_state = cpuidle_enter(drv, dev, next_state);
> +
> +	/* The cpu is no longer idle or about to enter idle. */
> +	idle_set_state(this_rq(), NULL);
> +
> +	if (entered_state == -EBUSY)
> +		default_idle_call();
> +
> +	return entered_state;
> +}
> +
>   /**
>    * cpuidle_idle_call - the main idle function
>    *
> @@ -92,7 +132,6 @@ static void cpuidle_idle_call(void)
>   	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
>   	struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
>   	int next_state, entered_state;
> -	bool reflect;
>
>   	/*
>   	 * Check if the idle task must be rescheduled. If it is the
> @@ -137,56 +176,19 @@ static void cpuidle_idle_call(void)
>   			goto exit_idle;
>   		}
>
> -		reflect = false;
>   		next_state = cpuidle_find_deepest_state(drv, dev);
> +		call_cpuidle(drv, dev, next_state);
>   	} else {
> -		reflect = true;
>   		/*
>   		 * Ask the cpuidle framework to choose a convenient idle state.
>   		 */
>   		next_state = cpuidle_select(drv, dev);
> -	}
> -	/* Fall back to the default arch idle method on errors. */
> -	if (next_state < 0) {
> -		default_idle_call();
> -		goto exit_idle;
> -	}
> -
> -	/*
> -	 * The idle task must be scheduled, it is pointless to
> -	 * go to idle, just update no idle residency and get
> -	 * out of this function
> -	 */
> -	if (current_clr_polling_and_test()) {
> -		dev->last_residency = 0;
> -		entered_state = next_state;
> -		local_irq_enable();
> -		goto exit_idle;
> -	}
> -
> -	/* Take note of the planned idle state. */
> -	idle_set_state(this_rq(), &drv->states[next_state]);
> -
> -	/*
> -	 * Enter the idle state previously returned by the governor decision.
> -	 * This function will block until an interrupt occurs and will take
> -	 * care of re-enabling the local interrupts
> -	 */
> -	entered_state = cpuidle_enter(drv, dev, next_state);
> -
> -	/* The cpu is no longer idle or about to enter idle. */
> -	idle_set_state(this_rq(), NULL);
> -
> -	if (entered_state == -EBUSY) {
> -		default_idle_call();
> -		goto exit_idle;
> -	}
> -
> -	/*
> -	 * Give the governor an opportunity to reflect on the outcome
> -	 */
> -	if (reflect)
> +		entered_state = call_cpuidle(drv, dev, next_state);
> +		/*
> +		 * Give the governor an opportunity to reflect on the outcome
> +		 */
>   		cpuidle_reflect(dev, entered_state);
> +	}
>
>   exit_idle:
>   	__current_set_polling();
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


  reply	other threads:[~2015-05-04 14:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-04 13:54 [PATCH 0/4] sched / idle: Reduce the number of branches in the idle loop Rafael J. Wysocki
2015-05-04 13:56 ` [PATCH 1/4] sched / idle: Move the default idle call code to a separate function Rafael J. Wysocki
2015-05-04 14:00   ` Daniel Lezcano
2015-05-04 14:22   ` Peter Zijlstra
2015-05-04 21:08     ` Rafael J. Wysocki
2015-05-04 13:57 ` [PATCH 2/4] cpuidle: Check the sign of index in cpuidle_reflect() Rafael J. Wysocki
2015-05-04 14:02   ` Daniel Lezcano
2015-05-04 13:57 ` [PATCH 3/4] sched / idle: Eliminate the "reflect" check from cpuidle_idle_call() Rafael J. Wysocki
2015-05-04 14:49   ` Daniel Lezcano [this message]
2015-05-04 13:58 ` [PATCH 4/4] sched / idle: Call default_idle_call() from cpuidle_enter_state() Rafael J. Wysocki
2015-05-04 15:04   ` Daniel Lezcano
2015-05-04 21:11     ` Rafael J. Wysocki
2015-05-04 14:25 ` [PATCH 0/4] sched / idle: Reduce the number of branches in the idle loop Peter Zijlstra
2015-05-04 21:23   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5547870E.6060308@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).