From: Dan Murphy <dmurphy@ti.com>
To: "Andrew F. Davis" <afd@ti.com>,
"Pali Rohár" <pali.rohar@gmail.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Dmitry Eremin-Solenikov" <dbaryshkov@gmail.com>,
"David Woodhouse" <dwmw2@infradead.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/8] power: bq27x00_battery: Fix function parameter alignment
Date: Thu, 23 Jul 2015 11:02:21 -0500 [thread overview]
Message-ID: <55B1100D.7080306@ti.com> (raw)
In-Reply-To: <1437601920-13045-4-git-send-email-afd@ti.com>
On 07/22/2015 04:51 PM, Andrew F. Davis wrote:
> Fix the alignment of function parameters on new lines.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
> drivers/power/bq27x00_battery.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
> index 203cf61..9cdad19 100644
> --- a/drivers/power/bq27x00_battery.c
> +++ b/drivers/power/bq27x00_battery.c
> @@ -210,7 +210,7 @@ MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \
> */
>
> static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg,
> - bool single)
> + bool single)
> {
> if (di->chip == BQ27425)
> return di->bus.read(di, reg - BQ27425_REG_OFFSET, single);
> @@ -565,7 +565,7 @@ static void bq27x00_battery_poll(struct work_struct *work)
> * Or 0 if something fails.
> */
> static int bq27x00_battery_current(struct bq27x00_device_info *di,
> - union power_supply_propval *val)
> + union power_supply_propval *val)
> {
> int curr;
> int flags;
> @@ -593,7 +593,7 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di,
> }
>
> static int bq27x00_battery_status(struct bq27x00_device_info *di,
> - union power_supply_propval *val)
> + union power_supply_propval *val)
> {
> int status;
>
> @@ -621,7 +621,7 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di,
> }
>
> static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
> - union power_supply_propval *val)
> + union power_supply_propval *val)
> {
> int level;
>
> @@ -655,7 +655,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
> * Or < 0 if something fails.
> */
> static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
> - union power_supply_propval *val)
> + union power_supply_propval *val)
> {
> int volt;
>
> @@ -671,7 +671,7 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
> }
>
> static int bq27x00_simple_value(int value,
> - union power_supply_propval *val)
> + union power_supply_propval *val)
> {
> if (value < 0)
> return value;
> @@ -987,7 +987,7 @@ static inline void bq27x00_battery_i2c_exit(void) {};
> #ifdef CONFIG_BATTERY_BQ27X00_PLATFORM
>
> static int bq27000_read_platform(struct bq27x00_device_info *di, u8 reg,
> - bool single)
> + bool single)
> {
> struct device *dev = di->dev;
> struct bq27000_platform_data *pdata = dev->platform_data;
Acked-by: Dan Murphy <dmurphy@ti.com>
--
------------------
Dan Murphy
next prev parent reply other threads:[~2015-07-23 16:02 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 21:51 [PATCH 0/8] Add support for additional bq27xxx devices Andrew F. Davis
2015-07-22 21:51 ` [PATCH 1/8] power: bq27x00_battery: Add manufacturer property Andrew F. Davis
2015-07-23 15:55 ` Dan Murphy
2015-07-23 15:59 ` Pali Rohár
2015-07-24 15:36 ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 2/8] power: bq27x00_battery: Fix lines over 80 characters long Andrew F. Davis
2015-07-23 16:00 ` Pali Rohár
2015-07-23 16:02 ` Dan Murphy
2015-07-24 15:36 ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 3/8] power: bq27x00_battery: Fix function parameter alignment Andrew F. Davis
2015-07-23 16:00 ` Pali Rohár
2015-07-23 16:02 ` Dan Murphy [this message]
2015-07-24 15:37 ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 4/8] power: bq27x00_battery: Checkpatch fixes Andrew F. Davis
2015-07-23 16:01 ` Pali Rohár
2015-07-23 16:04 ` Dan Murphy
2015-07-24 15:37 ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 5/8] power: bq27x00_battery: Renaming for consistency Andrew F. Davis
2015-07-23 16:12 ` Pali Rohár
[not found] ` <55B11E4C.6000006@ti.com>
2015-07-23 20:15 ` Pali Rohár
2015-07-23 20:56 ` Belisko Marek
2015-07-23 21:15 ` Pali Rohár
2015-07-23 21:36 ` Belisko Marek
2015-07-24 7:44 ` Pali Rohár
2015-07-22 21:51 ` [PATCH 6/8] power: bq27xxx_battery: Fix typos and change naming for state of charge functions Andrew F. Davis
2015-07-23 16:15 ` Pali Rohár
2015-07-23 17:19 ` Andrew F. Davis
2015-07-28 8:41 ` Pali Rohár
2015-07-22 21:51 ` [PATCH 7/8] power: bq27xxx_battery: Add support for additional bq27xxx family devices Andrew F. Davis
2015-07-23 16:20 ` Pali Rohár
2015-07-23 17:42 ` Andrew F. Davis
2015-07-28 8:43 ` Pali Rohár
2015-07-22 21:52 ` [PATCH 8/8] power: bq27xxx_battery: Cleanup health checking Andrew F. Davis
2015-07-23 16:22 ` Pali Rohár
2015-07-23 17:06 ` Joe Perches
2015-07-24 20:32 ` Andrew F. Davis
2015-07-24 20:27 ` Andrew F. Davis
2015-07-24 20:53 ` Pali Rohár
2015-07-23 16:27 ` [PATCH 0/8] Add support for additional bq27xxx devices Pali Rohár
2015-07-23 17:01 ` Andreas Dannenberg
2015-07-24 15:57 ` Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55B1100D.7080306@ti.com \
--to=dmurphy@ti.com \
--cc=afd@ti.com \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).