From: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
jun.nie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org
Subject: Re: [PATCH v2 3/4] ARM: dts: rockchip: add syscon-reboot-mode node
Date: Thu, 21 Jan 2016 09:38:17 +0100 [thread overview]
Message-ID: <56A098F9.5020100@gmail.com> (raw)
In-Reply-To: <1452598378-8371-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
On 12/01/16 12:32, Andy Yan wrote:
> Rockchip platform use a SYSCON mapped register store
> the reboot mode magic value for bootloader to use when
> system reboot. So add syscon-reboot-mode driver DT node
> for rk3xxx,rk3288 platform
>
> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> ---
Reviewed-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Changes in v2:
> - make this node as a subnode of PMU
>
> Changes in v1:
> - correct the maskrom magic number
> - use macro defined in rockchip_boot-mode.h for reboot-mode DT node
>
> arch/arm/boot/dts/rk3288.dtsi | 31 ++++++++++++++++++++++++++
> arch/arm/boot/dts/rk3xxx.dtsi | 33 +++++++++++++++++++++++++++-
> include/dt-bindings/soc/rockchip_boot-mode.h | 30 +++++++++++++++++++++++++
> 3 files changed, 93 insertions(+), 1 deletion(-)
> create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 04ea209..4e49fb7 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -45,6 +45,7 @@
> #include <dt-bindings/clock/rk3288-cru.h>
> #include <dt-bindings/thermal/thermal.h>
> #include <dt-bindings/power/rk3288-power.h>
> +#include <dt-bindings/soc/rockchip_boot-mode.h>
> #include "skeleton.dtsi"
>
> / {
> @@ -712,6 +713,36 @@
> clocks = <&cru ACLK_GPU>;
> };
> };
> +
> + reboot-mode {
> + compatible = "syscon-reboot-mode";
> + offset = <0x94>;
> +
> + normal {
> + linux,mode = "normal";
> + loader,magic = <BOOT_NORMAL>;
> + };
> +
> + loader {
> + linux,mode = "loader";
> + loader,magic = <BOOT_LOADER>;
> + };
> +
> + maskrom {
> + linux,mode = "maskrom";
> + loader,magic = <BOOT_MASKROM>;
> + };
> +
> + recovery {
> + linux,mode = "recovery";
> + loader,magic = <BOOT_RECOVERY>;
> + };
> +
> + fastboot {
> + linux,mode = "fastboot";
> + loader,magic = <BOOT_FASTBOOT>;
> + };
> + };
> };
>
> sgrf: syscon@ff740000 {
> diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
> index 4497d28..58af546 100644
> --- a/arch/arm/boot/dts/rk3xxx.dtsi
> +++ b/arch/arm/boot/dts/rk3xxx.dtsi
> @@ -43,6 +43,7 @@
>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/rockchip_boot-mode.h>
> #include "skeleton.dtsi"
>
> / {
> @@ -242,8 +243,38 @@
> };
>
> pmu: pmu@20004000 {
> - compatible = "rockchip,rk3066-pmu", "syscon";
> + compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
> reg = <0x20004000 0x100>;
> +
> + reboot-mode {
> + compatible = "syscon-reboot-mode";
> + offset = <0x40>;
> +
> + normal {
> + linux,mode = "normal";
> + loader,magic = <BOOT_NORMAL>;
> + };
> +
> + loader {
> + linux,mode = "loader";
> + loader,magic = <BOOT_LOADER>;
> + };
> +
> + maskrom {
> + linux,mode = "maskrom";
> + loader,magic = <BOOT_MASKROM>;
> + };
> +
> + recovery {
> + linux,mode = "recovery";
> + loader,magic = <BOOT_RECOVERY>;
> + };
> +
> + fastboot {
> + linux,mode = "fastboot";
> + loader,magic = <BOOT_FASTBOOT>;
> + };
> + };
> };
>
> grf: grf@20008000 {
> diff --git a/include/dt-bindings/soc/rockchip_boot-mode.h b/include/dt-bindings/soc/rockchip_boot-mode.h
> new file mode 100644
> index 0000000..eedf113
> --- /dev/null
> +++ b/include/dt-bindings/soc/rockchip_boot-mode.h
> @@ -0,0 +1,30 @@
> +#ifndef __ROCKCHIP_BOOT_MODE_H
> +#define __ROCKCHIP_BOOT_MODE_H
> +
> +/*high 24 bits is tag, low 8 bits is type*/
> +#define REBOOT_FLAG 0x5242C300
> +/* normal boot */
> +#define BOOT_NORMAL (REBOOT_FLAG + 0)
> +/* enter loader rockusb mode */
> +#define BOOT_LOADER (REBOOT_FLAG + 1)
> +/* enter maskrom rockusb mode */
> +#define BOOT_MASKROM (0xEF08A53C)
> +/* enter recovery */
> +#define BOOT_RECOVERY (REBOOT_FLAG + 3)
> +/* do not enter recover */
> +#define BOOT_NORECOVER (REBOOT_FLAG + 4)
> +/* boot second OS*/
> +#define BOOT_SECONDOS (REBOOT_FLAG + 5)
> +/* enter recover and wipe data. */
> +#define BOOT_WIPEDATA (REBOOT_FLAG + 6)
> +/* enter recover and wipe all data. */
> +#define BOOT_WIPEALL (REBOOT_FLAG + 7)
> +/* check firmware img with backup part*/
> +#define BOOT_CHECKIMG (REBOOT_FLAG + 8)
> + /* enter fast boot mode */
> +#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
> +#define BOOT_SECUREBOOT_DISABLE (REBOOT_FLAG + 10)
> +/* enter charge mode */
> +#define BOOT_CHARGING (REBOOT_FLAG + 11)
> +
> +#endif
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-01-21 8:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 11:27 [PATCH v2 0/4] add reboot mode driver Andy Yan
[not found] ` <1452598029-8222-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-01-12 11:29 ` [PATCH v2 1/4] dt-bindings: power: reset: add document for reboot-mode driver Andy Yan
2016-01-15 22:41 ` John Stultz
[not found] ` <CALAqxLUxh3=LhoHxqiRm_5L4G6m1Vctp=aUg+9_uAtLkFwW9bw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-19 8:31 ` Andy Yan
2016-01-20 18:28 ` Rob Herring
2016-01-20 18:47 ` John Stultz
2016-01-20 19:53 ` Rob Herring
2016-01-20 20:25 ` John Stultz
2016-01-21 6:27 ` Andy Yan
2016-01-25 17:11 ` Rob Herring
2016-01-26 7:35 ` Andy Yan
2016-01-12 11:31 ` [PATCH v2 2/4] power: reset: add reboot mode driver Andy Yan
2016-01-15 20:27 ` John Stultz
2016-01-19 8:38 ` Andy Yan
2016-01-21 8:37 ` Matthias Brugger
[not found] ` <1452598319-8324-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-01-27 10:53 ` Moritz Fischer
2016-02-02 7:31 ` Andy Yan
2016-01-12 11:32 ` [PATCH v2 3/4] ARM: dts: rockchip: add syscon-reboot-mode node Andy Yan
[not found] ` <1452598378-8371-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-01-21 8:38 ` Matthias Brugger [this message]
2016-01-12 11:33 ` [PATCH v2 4/4] ARM64: dts: rockchip: add syscon-reboot-mode DT node Andy Yan
2016-01-13 2:17 ` [PATCH v2 0/4] add reboot mode driver Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A098F9.5020100@gmail.com \
--to=matthias.bgg-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jun.nie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).