From mboxrd@z Thu Jan  1 00:00:00 1970
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: Re: [next] Odroid XU3 boot fail after cpufreq: dt: Use
 dev_pm_opp_set_rate() to switch frequency
Date: Sun, 14 Feb 2016 14:47:40 +0900
Message-ID: <56C014FC.8060009@gmail.com>
References: <56C008F2.3080807@gmail.com> <20160214052228.GA18226@vireshk-i7>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20160214052228.GA18226@vireshk-i7>
Sender: linux-kernel-owner@vger.kernel.org
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>, "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>, Nishanth Menon <nm@ti.com>, linux-pm@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Kukjin Kim <kgene@kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-samsung-soc@vger.kernel.org" <linux-samsung-soc@vger.kernel.org>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Javier Martinez Canillas <javier@osg.samsung.com>, Lukasz Majewski <l.majewski@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>
List-Id: linux-pm@vger.kernel.org

W dniu 14.02.2016 o 14:22, Viresh Kumar pisze:
> On 14-02-16, 13:56, Krzysztof Kozlowski wrote:
>> Hi all,
>>
>> Recently Odroid XU3 failed to boot on linux-next
>> on multi_v7 defconfig. exynos defconfig boots fine.
>>
>> Probably the "cpufreq: dt: Use dev_pm_opp_set_rate() to
>> switch frequency" is important here:
>> commit 78c3ba5df96c875b1668e1cd3ee0a69e62454f32
>> Author: Viresh Kumar <viresh.kumar@linaro.org>
>> Date:   Tue Feb 9 10:30:46 2016 +0530
>>
>>     cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
>>     
>>     OPP core supports frequency/voltage changes based on the target
>>     frequency now, use that instead of open coding the same in cpufreq-dt
>>     driver.
>>     
>>     Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>     Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
>>     Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Can you please try the below untested patch please ?

Thanks for quick reply. The patch fixed the problem.

Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

> diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
> index d7cd4e265766..a97b333036c9 100644
> --- a/drivers/base/power/opp/core.c
> +++ b/drivers/base/power/opp/core.c
> @@ -1156,9 +1156,15 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
>  		return -EINVAL;
>  	}
>  
> -	opp->u_volt = microvolt[0];
> -	opp->u_volt_min = microvolt[1];
> -	opp->u_volt_max = microvolt[2];
> +	if (count == 1) {
> +		opp->u_volt = microvolt[0];
> +		opp->u_volt_min = opp->u_volt;
> +		opp->u_volt_max = opp->u_volt;
> +	} else {
> +		opp->u_volt = microvolt[0];
> +		opp->u_volt_min = microvolt[1];
> +		opp->u_volt_max = microvolt[2];
> +	}
>  
>  	/* Search for "opp-microamp-<name>" */
>  	prop = NULL;
>