From: Sudeep Holla <sudeep.holla@arm.com>
To: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>,
linux-pm <linux-pm@vger.kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Kevin Hilman <khilman@kernel.org>,
Thibaud Cornic <thibaud_cornic@sigmadesigns.com>,
Mason <slash.tmp@free.fr>, Sebastian Frias <sf84@laposte.net>,
Robin Murphy <robin.murphy@arm.com>
Subject: Re: [RFC PATCH v1] ARM: tango: add Suspend-to-RAM support
Date: Wed, 29 Jun 2016 18:48:18 +0100 [thread overview]
Message-ID: <577409E2.7020106@arm.com> (raw)
In-Reply-To: <5773D3FB.4030101@sigmadesigns.com>
On 29/06/16 14:58, Marc Gonzalez wrote:
> Ask firmware to put RAM in self-refresh mode and power system down.
>
> echo mem > /sys/power/state
>
> See Documentation/power/states.txt
>
> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
> ---
> This is a RFC because I have a few doubts:
> 1) return value when tango_suspend() fails and unexpectedly returns (I used -EIO)
> 2) conditionally building pm.c (using CONFIG_SUSPEND? CONFIG_PM_SLEEP? other?)
> 3) .valid is required, right?
> ---
> arch/arm/mach-tango/Makefile | 1 +
> arch/arm/mach-tango/pm.c | 37 +++++++++++++++++++++++++++++++++++++
> arch/arm/mach-tango/smc.h | 1 +
> 3 files changed, 39 insertions(+)
> create mode 100644 arch/arm/mach-tango/pm.c
>
> diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
> index 7ca753aa9fb6..822b7ca803c6 100644
> --- a/arch/arm/mach-tango/Makefile
> +++ b/arch/arm/mach-tango/Makefile
> @@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
>
> obj-y += setup.o smc.o xenv.o
> obj-$(CONFIG_SMP) += platsmp.o
> +obj-$(CONFIG_SUSPEND) += pm.o
> diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c
> new file mode 100644
> index 000000000000..08a39beaea09
> --- /dev/null
> +++ b/arch/arm/mach-tango/pm.c
> @@ -0,0 +1,37 @@
> +#include <linux/init.h>
> +#include <linux/suspend.h>
> +#include <asm/suspend.h>
> +#include "smc.h"
> +
> +static int tango_pm_powerdown(unsigned long arg)
> +{
> + tango_suspend(virt_to_phys(cpu_resume));
> +
> + return -EIO; /* tango_suspend has failed */
> +}
> +
> +static int tango_pm_enter(suspend_state_t state)
> +{
> + if (state == PM_SUSPEND_MEM)
> + return cpu_suspend(0, tango_pm_powerdown);
> +
> + return -EINVAL;
> +}
> +
> +static int tango_pm_valid(suspend_state_t state)
> +{
> + return state == PM_SUSPEND_MEM;
> +}
> +
> +static const struct platform_suspend_ops tango_pm_ops = {
> + .enter = tango_pm_enter,
> + .valid = tango_pm_valid,
You can use suspend_valid_only_mem instead which does exactly same thing.
--
Regards,
Sudeep
--
Regards,
Sudeep
next prev parent reply other threads:[~2016-06-29 17:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 13:58 [RFC PATCH v1] ARM: tango: add Suspend-to-RAM support Marc Gonzalez
2016-06-29 17:48 ` Sudeep Holla [this message]
2016-06-30 8:44 ` [RFC PATCH v2] " Marc Gonzalez
2016-07-04 9:01 ` Marc Gonzalez
2016-07-07 13:08 ` [PATCH v3] " Marc Gonzalez
2016-07-07 14:01 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=577409E2.7020106@arm.com \
--to=sudeep.holla@arm.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=marc_gonzalez@sigmadesigns.com \
--cc=mark.rutland@arm.com \
--cc=robin.murphy@arm.com \
--cc=sf84@laposte.net \
--cc=slash.tmp@free.fr \
--cc=thibaud_cornic@sigmadesigns.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).