linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
	m.reichl@fivetechno.de, myungjoo.ham@gmail.com,
	cw00.choi@samsung.com
Subject: Re: [RFC v2 7/7] ARM: dts: exynos4x12: add suspend OPP for DMC and leftbus for Prime
Date: Mon, 19 Dec 2016 15:28:18 +0100	[thread overview]
Message-ID: <5857EE82.90403@math.uni-bielefeld.de> (raw)
In-Reply-To: <3433933.B7FFrWlFIV@amdc3058>

Hi Bartlomiej,


Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
> On Monday, December 19, 2016 03:16:27 AM Tobias Jakobi wrote:
>> Both DMC and leftbus adjust regulator voltages (MIF and INT
>> respectively), which have to be in a safe range to allow the
>> BL0 to operate correctly.
>>
>> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
>> ---
>>  arch/arm/boot/dts/exynos4412-prime.dtsi | 2 ++
> 
> Could you please post patch(es) adding this file?  I'm planning to fix
> OPPs for Exynos4412-Prime and don't wont to duplicate efforts.
I can do it, but I rather not. My patches are based on the vendor kernel
by Hardkernel. But I'm not affiliated with with either Hardkernel nor
Samsung, so I have no access to the reference manual and no idea if the
frequencies and voltages are actually correct. I don't want to sign off
something which I can't verify to be correct...



> Also please remember to mention in the cover letter the tree that your
> patchset is based on (if it is different than the mainline).
I usually base patches on current torvalds/master, but I didn't bother
with this series since it's RFC and very much WIP. I don't think even
the devfreq bits cleanly apply. Anyway, I'm doing it properly once this
is out of RFC.



With best wishes,
Tobias


> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
>> index 97d1b9c..18e411f 100644
>> --- a/arch/arm/boot/dts/exynos4412-prime.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi
>> @@ -123,6 +123,7 @@
>>  		opp@400000000 {
>>  			opp-hz = /bits/ 64 <400000000>;
>>  			opp-microvolt = <1100000>;
>> +			opp-suspend;
>>  		};
>>  	};
>>  
>> @@ -145,6 +146,7 @@
>>  		opp@200000000 {
>>  			opp-hz = /bits/ 64 <200000000>;
>>  			opp-microvolt = <1150000>;
>> +			opp-suspend;
>>  		};
>>  	};
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  reply	other threads:[~2016-12-19 14:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20161219021836epcas1p37f8c12ca0bc7a404fc206f81331811bb@epcas1p3.samsung.com>
2016-12-19  2:16 ` [RFC v2 0/7] PM / devfreq: draft for OPP suspend impl (even draftier) Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 1/7] PM / devfreq: Replace 'stop_polling' boolean with flags Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 2/7] PM / devfreq: Track suspend state of DevFreq devices Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 3/7] PM / devfreq: Add DevFreq subsystem suspend/resume Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 4/7] PM / devfreq: Suspend subsystem on system suspend/hibernate Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 5/7] PM / devfreq: exynos-bus: add support for suspend OPP Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 6/7] ARM: dts: exynos4x12: add suspend OPP for DMC and leftbus Tobias Jakobi
2016-12-19  2:16   ` [RFC v2 7/7] ARM: dts: exynos4x12: add suspend OPP for DMC and leftbus for Prime Tobias Jakobi
2016-12-19 14:19     ` Bartlomiej Zolnierkiewicz
2016-12-19 14:28       ` Tobias Jakobi [this message]
2016-12-19 11:18   ` [RFC v2 0/7] PM / devfreq: draft for OPP suspend impl (even draftier) Chanwoo Choi
2016-12-19 14:56     ` Tobias Jakobi
2016-12-19 15:51       ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5857EE82.90403@math.uni-bielefeld.de \
    --to=tjakobi@math.uni-bielefeld.de \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.reichl@fivetechno.de \
    --cc=myungjoo.ham@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).