public inbox for linux-pm@vger.kernel.org
 help / color / mirror / Atom feed
From: Mario Limonciello <superm1@kernel.org>
To: Matthew Leach <matthew.leach@collabora.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Pavel Machek <pavel@kernel.org>, Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	YoungJun Park <youngjun.park@lge.com>,
	kernel@collabora.com
Subject: Re: [PATCH v3] PM: hibernate: call preallocate_image after freeze prepare
Date: Fri, 3 Apr 2026 08:26:28 -0500	[thread overview]
Message-ID: <5c620e9a-8056-42a4-95da-dc175b1cc76d@kernel.org> (raw)
In-Reply-To: <20260403-hibernation-fixes-v3-1-31bc9fa3ba2d@collabora.com>

On 4/3/26 2:36 AM, Matthew Leach wrote:
> [You don't often get email from matthew.leach@collabora.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> Certain drivers release resources (pinned pages, etc.) into system
> memory during the prepare freeze PM op, making them swappable.
> Currently, hibernate_preallocate_memory is called before prepare freeze,
> so those drivers have no opportunity to release resources first. If a
> driver is holding a large amount of unswappable system RAM, this can
> cause hibernate_preallocate_memory to fail.
> 
> Move the call to hibernate_preallocate_memory after prepare freeze.
> According to the documentation for the prepare callback, devices should
> be left in a usable state, so storage drivers should still be able to
> service I/O requests. This allows drivers to release unswappable
> resources prior to preallocation, so they can be swapped out through
> hibernate_preallocate_memory's reclaim path. Also remove
> shrink_shmem_memory since hibernate_preallocate_memory will have
> reclaimed enough memory for the hibernation image.
> 
> Signed-off-by: Matthew Leach <matthew.leach@collabora.com>
LGTM.

Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
> ---
> Changes in v3:
> - Changed error label names to 'Thaw' and 'Complete'.
> - Link to v2: https://patch.msgid.link/20260326-hibernation-fixes-v2-1-f6707d82b7b9@collabora.com
> 
> Changes in v2:
> - Removed shrink_shmem_memory.
> - Fixed missing call to dpm_prepare in error path.
> - Link to v1: https://lore.kernel.org/r/20260321-hibernation-fixes-v1-1-5fe9637b6ff9@collabora.com
> ---
>   kernel/power/hibernate.c | 46 +++++++++-------------------------------------
>   1 file changed, 9 insertions(+), 37 deletions(-)
> 
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index af8d07bafe02..d2479c69d71a 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -392,23 +392,6 @@ static int create_image(int platform_mode)
>          return error;
>   }
> 
> -static void shrink_shmem_memory(void)
> -{
> -       struct sysinfo info;
> -       unsigned long nr_shmem_pages, nr_freed_pages;
> -
> -       si_meminfo(&info);
> -       nr_shmem_pages = info.sharedram; /* current page count used for shmem */
> -       /*
> -        * The intent is to reclaim all shmem pages. Though shrink_all_memory() can
> -        * only reclaim about half of them, it's enough for creating the hibernation
> -        * image.
> -        */
> -       nr_freed_pages = shrink_all_memory(nr_shmem_pages);
> -       pr_debug("requested to reclaim %lu shmem pages, actually freed %lu pages\n",
> -                       nr_shmem_pages, nr_freed_pages);
> -}
> -
>   /**
>    * hibernation_snapshot - Quiesce devices and create a hibernation image.
>    * @platform_mode: If set, use platform driver to prepare for the transition.
> @@ -425,14 +408,9 @@ int hibernation_snapshot(int platform_mode)
>          if (error)
>                  goto Close;
> 
> -       /* Preallocate image memory before shutting down devices. */
> -       error = hibernate_preallocate_memory();
> -       if (error)
> -               goto Close;
> -
>          error = freeze_kernel_threads();
>          if (error)
> -               goto Cleanup;
> +               goto Close;
> 
>          if (hibernation_test(TEST_FREEZER)) {
> 
> @@ -445,19 +423,13 @@ int hibernation_snapshot(int platform_mode)
>          }
> 
>          error = dpm_prepare(PMSG_FREEZE);
> -       if (error) {
> -               dpm_complete(PMSG_RECOVER);
> -               goto Thaw;
> -       }
> +       if (error)
> +               goto Complete;
> 
> -       /*
> -        * Device drivers may move lots of data to shmem in dpm_prepare(). The shmem
> -        * pages will use lots of system memory, causing hibernation image creation
> -        * fail due to insufficient free memory.
> -        * This call is to force flush the shmem pages to swap disk and reclaim
> -        * the system memory so that image creation can succeed.
> -        */
> -       shrink_shmem_memory();
> +       /* Preallocate image memory before shutting down devices. */
> +       error = hibernate_preallocate_memory();
> +       if (error)
> +               goto Complete;
> 
>          console_suspend_all();
>          pm_restrict_gfp_mask();
> @@ -492,10 +464,10 @@ int hibernation_snapshot(int platform_mode)
>          platform_end(platform_mode);
>          return error;
> 
> + Complete:
> +       dpm_complete(PMSG_RECOVER);
>    Thaw:
>          thaw_kernel_threads();
> - Cleanup:
> -       swsusp_free();
>          goto Close;
>   }
> 
> 
> ---
> base-commit: f338e77383789c0cae23ca3d48adcc5e9e137e3c
> change-id: 20260321-hibernation-fixes-69bca2ee5b65
> 
> Best regards,
> --
> Matt
> 


  reply	other threads:[~2026-04-03 13:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-03  7:36 [PATCH v3] PM: hibernate: call preallocate_image after freeze prepare Matthew Leach
2026-04-03 13:26 ` Mario Limonciello [this message]
2026-04-06 15:11 ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5c620e9a-8056-42a4-95da-dc175b1cc76d@kernel.org \
    --to=superm1@kernel.org \
    --cc=kernel@collabora.com \
    --cc=lenb@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=matthew.leach@collabora.com \
    --cc=pavel@kernel.org \
    --cc=rafael@kernel.org \
    --cc=youngjun.park@lge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox