From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
To: Tony Lindgren <tony@atomide.com>, linux-omap@vger.kernel.org
Cc: Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>,
Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
Kevin Hilman <khilman@kernel.org>
Subject: Re: [PATCH 11/12] PM / AVS: SmartReflex: Prepare to use device tree based probing
Date: Mon, 26 Feb 2018 11:37:51 +0100 [thread overview]
Message-ID: <5d37e6ff-9b89-b677-859e-6eeae5527276@intel.com> (raw)
In-Reply-To: <20180223210100.86732-12-tony@atomide.com>
On 2/23/2018 10:00 PM, Tony Lindgren wrote:
> We are currently probing smartreflex with omap_device while we are
> already probing smartreflex related interconnect target module with
> ti-sysc driver and dts data.
>
> Before we can flip things on for ti-sysc, we need to prepare the
> smartreflex driver a bit:
>
> 1. The smartreflex clock is really for the whole interconnect target
> module. So it may be configured at the parent device level with
> ti-sysc
>
> 2. With ti-sysc, we have the child device manage interconnect target
> module directly if pm_runtime_irq_safe() is set and there is only
> one child. In that case nobody else is going to call pm_runtime_get
> and put, so we need to add these calls to idle smartreflex properly
> after probe if not fully configured
>
> 3. With ti-sysc, the parent driver may rebind. So we want to use
> platform_driver_register() and don't want probe to be __init
>
> Note that this patch depends on the related changes to ti-sysc driver
> and omap_device probing to prevent both ti-sysc and omap_device to
> try to probe smartreflex.
>
> Cc: linux-pm@vger.kernel.org
> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
You need an ACK from Kevin Hilman on this anyway and if you receive one,
please feel free to route it whatever way is convenient for you.
> ---
> drivers/power/avs/smartreflex.c | 41 ++++++++++++++++++++++++++++++++++-------
> 1 file changed, 34 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
> --- a/drivers/power/avs/smartreflex.c
> +++ b/drivers/power/avs/smartreflex.c
> @@ -132,12 +132,16 @@ static void sr_set_clk_length(struct omap_sr *sr)
> struct clk *fck;
> u32 fclk_speed;
>
> - fck = clk_get(&sr->pdev->dev, "fck");
> -
> + /* Try interconnect target module fck first if it already exists */
> + fck = clk_get(sr->pdev->dev.parent, "fck");
> if (IS_ERR(fck)) {
> - dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
> - __func__, dev_name(&sr->pdev->dev));
> - return;
> + fck = clk_get(&sr->pdev->dev, "fck");
> + if (IS_ERR(fck)) {
> + dev_err(&sr->pdev->dev,
> + "%s: unable to get fck for device %s\n",
> + __func__, dev_name(&sr->pdev->dev));
> + return;
> + }
> }
>
> fclk_speed = clk_get_rate(fck);
> @@ -838,7 +842,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
> DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
> omap_sr_autocomp_store, "%llu\n");
>
> -static int __init omap_sr_probe(struct platform_device *pdev)
> +static int omap_sr_probe(struct platform_device *pdev)
> {
> struct omap_sr *sr_info;
> struct omap_sr_data *pdata = pdev->dev.platform_data;
> @@ -898,6 +902,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
>
> list_add(&sr_info->node, &sr_list);
>
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&pdev->dev);
> + goto err_list_del;
> + }
> +
> /*
> * Call into late init to do initializations that require
> * both sr driver and sr class driver to be initiallized.
> @@ -966,12 +976,17 @@ static int __init omap_sr_probe(struct platform_device *pdev)
>
> }
>
> + pm_runtime_put_sync(&pdev->dev);
> +
> return ret;
>
> err_debugfs:
> debugfs_remove_recursive(sr_info->dbg_dir);
> err_list_del:
> list_del(&sr_info->node);
> +
> + pm_runtime_put_sync(&pdev->dev);
> +
> return ret;
> }
>
> @@ -1025,11 +1040,23 @@ static void omap_sr_shutdown(struct platform_device *pdev)
> return;
> }
>
> +static const struct of_device_id omap_sr_match[] = {
> + { .compatible = "ti,omap3-smartreflex-core", },
> + { .compatible = "ti,omap3-smartreflex-mpu-iva", },
> + { .compatible = "ti,omap4-smartreflex-core", },
> + { .compatible = "ti,omap4-smartreflex-mpu", },
> + { .compatible = "ti,omap4-smartreflex-iva", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, omap_sr_match);
> +
> static struct platform_driver smartreflex_driver = {
> + .probe = omap_sr_probe,
> .remove = omap_sr_remove,
> .shutdown = omap_sr_shutdown,
> .driver = {
> .name = DRIVER_NAME,
> + .of_match_table = omap_sr_match,
> },
> };
>
> @@ -1048,7 +1075,7 @@ static int __init sr_init(void)
> else
> pr_warn("%s: No PMIC hook to init smartreflex\n", __func__);
>
> - ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
> + ret = platform_driver_register(&smartreflex_driver);
> if (ret) {
> pr_err("%s: platform driver register failed for SR\n",
> __func__);
next prev parent reply other threads:[~2018-02-26 10:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180223210100.86732-1-tony@atomide.com>
2018-02-23 21:00 ` [PATCH 11/12] PM / AVS: SmartReflex: Prepare to use device tree based probing Tony Lindgren
2018-02-26 10:37 ` Rafael J. Wysocki [this message]
2018-02-26 21:34 ` Tony Lindgren
2018-03-01 3:07 ` Kevin Hilman
2018-03-01 3:49 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5d37e6ff-9b89-b677-859e-6eeae5527276@intel.com \
--to=rafael.j.wysocki@intel.com \
--cc=d-gerlach@ti.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nm@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox