From: Viresh Kumar <viresh.kumar@linaro.org>
To: rjw@sisk.pl
Cc: linaro-kernel@lists.linaro.org, patches@linaro.org,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
Viresh Kumar <viresh.kumar@linaro.org>
Subject: [PATCH V2 Resend 23/34] cpufreq: powernow: Convert to light weight ->target_index() routine
Date: Fri, 18 Oct 2013 19:29:46 +0530 [thread overview]
Message-ID: <62e5aec48d0c34ebd22c90cf8e5878c1f396b85a.1382104515.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1382104514.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1382104514.git.viresh.kumar@linaro.org>
This patch converts existing .target() to newly defined light weight
.target_index() routine for this driver.
CPUFreq core will call cpufreq_frequency_table_target() before calling this
routine and will pass index to it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/powernow-k6.c | 35 +++++------------------------------
drivers/cpufreq/powernow-k7.c | 22 ++++------------------
drivers/cpufreq/powernow-k8.c | 24 ++++++++----------------
3 files changed, 17 insertions(+), 64 deletions(-)
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index eda1702..643e795 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -63,12 +63,12 @@ static int powernow_k6_get_cpu_multiplier(void)
/**
- * powernow_k6_set_state - set the PowerNow! multiplier
+ * powernow_k6_target - set the PowerNow! multiplier
* @best_i: clock_ratio[best_i] is the target multiplier
*
* Tries to change the PowerNow! multiplier
*/
-static void powernow_k6_set_state(struct cpufreq_policy *policy,
+static int powernow_k6_target(struct cpufreq_policy *policy,
unsigned int best_i)
{
unsigned long outvalue = 0, invalue = 0;
@@ -77,7 +77,7 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
if (clock_ratio[best_i].driver_data > max_multiplier) {
printk(KERN_ERR PFX "invalid target frequency\n");
- return;
+ return -EINVAL;
}
freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
@@ -100,31 +100,6 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- return;
-}
-
-
-/**
- * powernow_k6_setpolicy - sets a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * sets a new CPUFreq policy
- */
-static int powernow_k6_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int newstate = 0;
-
- if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
- target_freq, relation, &newstate))
- return -EINVAL;
-
- powernow_k6_set_state(policy, newstate);
-
return 0;
}
@@ -161,7 +136,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
unsigned int i;
for (i = 0; i < 8; i++) {
if (i == max_multiplier)
- powernow_k6_set_state(policy, i);
+ powernow_k6_target(policy, i);
}
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
@@ -176,7 +151,7 @@ static unsigned int powernow_k6_get(unsigned int cpu)
static struct cpufreq_driver powernow_k6_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernow_k6_target,
+ .target_index = powernow_k6_target,
.init = powernow_k6_cpu_init,
.exit = powernow_k6_cpu_exit,
.get = powernow_k6_get,
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index 44d345b..946708a 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -248,7 +248,7 @@ static void change_VID(int vid)
}
-static void change_speed(struct cpufreq_policy *policy, unsigned int index)
+static int powernow_target(struct cpufreq_policy *policy, unsigned int index)
{
u8 fid, vid;
struct cpufreq_freqs freqs;
@@ -291,6 +291,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index)
local_irq_enable();
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
}
@@ -533,22 +535,6 @@ static int powernow_decode_bios(int maxfid, int startvid)
}
-static int powernow_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int newstate;
-
- if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
- relation, &newstate))
- return -EINVAL;
-
- change_speed(policy, newstate);
-
- return 0;
-}
-
-
/*
* We use the fact that the bus frequency is somehow
* a multiple of 100000/3 khz, then we compute sgtc according
@@ -694,7 +680,7 @@ static int powernow_cpu_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver powernow_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernow_target,
+ .target_index = powernow_target,
.get = powernow_get,
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
.bios_limit = acpi_processor_get_bios_limit,
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 298beb7..62a1ce4 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -977,20 +977,17 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
struct powernowk8_target_arg {
struct cpufreq_policy *pol;
- unsigned targfreq;
- unsigned relation;
+ unsigned newstate;
};
static long powernowk8_target_fn(void *arg)
{
struct powernowk8_target_arg *pta = arg;
struct cpufreq_policy *pol = pta->pol;
- unsigned targfreq = pta->targfreq;
- unsigned relation = pta->relation;
+ unsigned newstate = pta->newstate;
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
u32 checkfid;
u32 checkvid;
- unsigned int newstate;
int ret;
if (!data)
@@ -1004,8 +1001,9 @@ static long powernowk8_target_fn(void *arg)
return -EIO;
}
- pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
- pol->cpu, targfreq, pol->min, pol->max, relation);
+ pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n",
+ pol->cpu, data->powernow_table[newstate].frequency, pol->min,
+ pol->max);
if (query_current_values_with_pending_wait(data))
return -EIO;
@@ -1021,10 +1019,6 @@ static long powernowk8_target_fn(void *arg)
checkvid, data->currvid);
}
- if (cpufreq_frequency_table_target(pol, data->powernow_table,
- targfreq, relation, &newstate))
- return -EIO;
-
mutex_lock(&fidvid_mutex);
powernow_k8_acpi_pst_values(data, newstate);
@@ -1044,11 +1038,9 @@ static long powernowk8_target_fn(void *arg)
}
/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol,
- unsigned targfreq, unsigned relation)
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned index)
{
- struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
- .relation = relation };
+ struct powernowk8_target_arg pta = { .pol = pol, .newstate = index };
return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
@@ -1213,7 +1205,7 @@ out:
static struct cpufreq_driver cpufreq_amd64_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernowk8_target,
+ .target_index = powernowk8_target,
.bios_limit = acpi_processor_get_bios_limit,
.init = powernowk8_cpu_init,
.exit = powernowk8_cpu_exit,
--
1.7.12.rc2.18.g61b472e
next prev parent reply other threads:[~2013-10-18 13:59 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-18 13:59 [PATCH V2 Resend 00/34] CPUFreq Cleanup Part III Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 01/34] cpufreq: Implement light weight ->target_index() routine Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 02/34] cpufreq: acpi: Convert to " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 03/34] cpufreq: arm_big_little: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 04/34] cpufreq: at32ap: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 05/34] cpufreq: blackfin: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 06/34] cpufreq: cpu0: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 07/34] cpufreq: cris: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 08/34] cpufreq: davinci: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 09/34] cpufreq: dbx500: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 10/34] cpufreq: e_powersaver: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 11/34] cpufreq: elanfreq: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 12/34] cpufreq: exynos: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 13/34] cpufreq: ia64: " Viresh Kumar
2013-10-22 16:32 ` Luck, Tony
2013-10-18 13:59 ` [PATCH V2 Resend 14/34] cpufreq: imx6q: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 15/34] cpufreq: kirkwood: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 16/34] cpufreq: longhaul: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 17/34] cpufreq: loongson2: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 18/34] cpufreq: maple: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 19/34] cpufreq: omap: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 20/34] cpufreq: p4: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 21/34] cpufreq: pasemi: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 22/34] cpufreq: pmac32: " Viresh Kumar
2013-10-18 13:59 ` Viresh Kumar [this message]
2013-10-18 13:59 ` [PATCH V2 Resend 24/34] cpufreq: ppc: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 25/34] cpufreq: pxa: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 26/34] cpufreq: s3c2416: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 27/34] cpufreq: s3c64xx: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 28/34] cpufreq: s5pv210: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 29/34] cpufreq: sa11x0: " Viresh Kumar
2013-10-18 15:46 ` Russell King - ARM Linux
2013-10-21 9:23 ` Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 30/34] cpufreq: sc520: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 31/34] cpufreq: sparc: " Viresh Kumar
2013-10-18 17:30 ` David Miller
2013-10-18 13:59 ` [PATCH V2 Resend 32/34] cpufreq: SPEAr: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 33/34] cpufreq: speedstep: " Viresh Kumar
2013-10-18 13:59 ` [PATCH V2 Resend 34/34] cpufreq: tegra: " Viresh Kumar
2013-10-25 12:56 ` [PATCH V2 Resend 00/34] CPUFreq Cleanup Part III Rafael J. Wysocki
2013-10-25 13:55 ` Viresh Kumar
2013-10-25 14:12 ` Rafael J. Wysocki
2013-10-25 14:16 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=62e5aec48d0c34ebd22c90cf8e5878c1f396b85a.1382104515.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=cpufreq@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=patches@linaro.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).