From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Looijmans Subject: Re: LTC3651 and other GPIO chargers Date: Fri, 28 Jul 2017 07:27:09 +0200 Message-ID: <71ab477e-7325-ab18-533d-76718acfee84@topic.nl> References: <20170626162105.rgewvl2z2ftbxqyn@lenoch> <5b439c7f-4401-5333-a45f-2d2e243902c8@topic.nl> <20170728010440.4vw23w5xafyhanp6@lenoch> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 8BIT Return-path: Received: from mx12-04.smtp.antispamcloud.com ([46.165.232.174]:34967 "EHLO mx12-04.smtp.antispamcloud.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750935AbdG1F1P (ORCPT ); Fri, 28 Jul 2017 01:27:15 -0400 In-Reply-To: <20170728010440.4vw23w5xafyhanp6@lenoch> Content-Language: nl Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Ladislav Michl Cc: linux-pm@vger.kernel.org, Sebastian Reichel On 28-07-17 03:04, Ladislav Michl wrote: > Hello Mike, > > On Tue, Jun 27, 2017 at 07:39:21AM +0200, Mike Looijmans wrote: >> On 26-06-17 18:21, Ladislav Michl wrote: >>> Hi there! >>> >>> A driver for LTC3651 was recently added to -next >>> https://patchwork.kernel.org/patch/9717049/ >>> which brings a question whenever we want to add separate driver >>> (or vendor specific bindings) for ever growing list of similar >>> chargers. For example those using the same status output lines >>> are: BQ24232HA, LTC4007, LTM8061, RT9502, LT3651, LT3650, TP4056, >>> MAX1737... >>> Others for example BQ24032A and LM3658 (which I have to support) >>> are using different status encoding, ie. LM3658: >>> >>> stat1 stat2 Condition >>> 0 0 Power-Down, charging is suspended or interrupted >>> 1 0 Pre-qualification mode, CC and CV charging >>> 0 1 Charge is completed >>> 1 1 Bad battery (Safety timer expired), or LDO mode >>> >>> What about extending gpio-charger instead? >>> - allow gpio list fdt subnode >>> - consider each gpio line to represent bit in a word >>> - provide per property subnodes >>> - each subnode holds a mask and mapping to property values >>> This way we should be able to cover most chargers providing status >>> using gpios. Comments welcome and appreciated - those will turn into >>> implementation. >> >> It's an interesting idea, and while writing the ltc3651 driver, I was >> thinking along those lines already. However, there are only two gpio charger >> drivers now, so I didn't see the need yet. >> >> The table is an interesting approach. Something else to consider: Some gpio >> chargers allow control as well, e.g. pulling the "charging" ping low >> externally forces the charging to stop. > > Just one more question before submitting "one driver for all" patch... > In LTC3651 you made acpr_gpio mandatory while chrg_gpio and fault_gpio > are optional. I quite do not get it as those later two gpios make > driver LTC3651 specific, while without them it is just another gpio-charger > driver. Also I have a board here, where acpr_gpio is not routed at all > and ADC is used to measure Vin, which makes this driver imposible to use. > > Any specific reason you implemented it this way? As once 4.13 is out, > devicetree binding will be set in stone and I'm out of luck... > > (based on that I exteded gpio-charger to take into account optional > gpios as well) I only made acpr_gpio mandatory out of a feeling that at least one of the three should be connected, and it makes things slightly simpler. Without it, the "online" property isn't available. It can be made optional, but it requires a few changes in the driver. > >> Something that might help is to create a "GPIO charger" sub-menu in Kconfig, >> to make hunting for these drivers a bit easier. > > Thank you, > ladis > Kind regards, Mike Looijmans System Expert TOPIC Products Materiaalweg 4, NL-5681 RJ Best Postbus 440, NL-5680 AK Best Telefoon: +31 (0) 499 33 69 79 E-mail: mike.looijmans@topicproducts.com Website: www.topicproducts.com Please consider the environment before printing this e-mail