From: Tomasz Figa <t.figa@samsung.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
Viresh Kumar <viresh.kumar@linaro.org>,
cpufreq@vger.kernel.org, linux-pm@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH] cpufreq: fix EXYNOS drivers selection
Date: Fri, 09 Aug 2013 17:50:05 +0200 [thread overview]
Message-ID: <76454119.W9pKpoo1U1@amdc1227> (raw)
In-Reply-To: <2522264.d7vsK7QKUi@amdc1032>
Hi Bart,
On Friday 09 of August 2013 14:04:55 Bartlomiej Zolnierkiewicz wrote:
> * remove superfluous pr_debug() call from exynos_cpufreq_init()
> (init errors are always logged anyway)
> * add dummy per-SoC type init functions to exynos-cpufreq.h
> * make per-SoC type cpufreq config options selectable
> * make CONFIG_ARM_EXYNOS_CPUFREQ config option invisible to user and
> automatically enable it when needed
>
> This patch fixes following issues:
> * EXYNOS per-SoC type cpufreq support (i.e. exynos4210-cpufreq.c) being
> always built if given SoC support was enabled (i.e. CPU_EXYNOS4210),
> even if common EXYNOS cpufreq support was disabled
> * inability to select cpufreq for each SoC type separately (it could
> be only enabled/disabled for all SoCs for which support was enabled)
> * EXYNOS5440 cpufreq support was always enabled when EXYNOS5440
> support was enabled and couldn't be disabled
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/cpufreq/Kconfig.arm | 36
> ++++++++++++++++++++++++------------ drivers/cpufreq/exynos-cpufreq.c |
> 1 -
> drivers/cpufreq/exynos-cpufreq.h | 21 +++++++++++++++++++++
> 3 files changed, 45 insertions(+), 13 deletions(-)
>
> Index: b/drivers/cpufreq/Kconfig.arm
> ===================================================================
> --- a/drivers/cpufreq/Kconfig.arm 2013-08-08 14:36:09.000000000 +0200
> +++ b/drivers/cpufreq/Kconfig.arm 2013-08-08 15:50:58.099420242 +0200
> @@ -17,37 +17,47 @@ config ARM_DT_BL_CPUFREQ
> big.LITTLE platform. This gets frequency tables from DT.
>
> config ARM_EXYNOS_CPUFREQ
> - bool "SAMSUNG EXYNOS SoCs"
> - depends on ARCH_EXYNOS
> + bool
> select CPU_FREQ_TABLE
> - default y
> - help
> - This adds the CPUFreq driver common part for Samsung
> - EXYNOS SoCs.
> -
> - If in doubt, say N.
>
> config ARM_EXYNOS4210_CPUFREQ
> - def_bool CPU_EXYNOS4210
> + bool "SAMSUNG EXYNOS4210"
> + depends on CPU_EXYNOS4210
> + default y
> + select ARM_EXYNOS_CPUFREQ
> help
> This adds the CPUFreq driver for Samsung EXYNOS4210
> SoC (S5PV310 or S5PC210).
>
> + If in doubt, say N.
> +
> config ARM_EXYNOS4X12_CPUFREQ
> - def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> + bool "SAMSUNG EXYNOS4x12"
> + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> + default y
> + select ARM_EXYNOS_CPUFREQ
> help
> This adds the CPUFreq driver for Samsung EXYNOS4X12
> SoC (EXYNOS4212 or EXYNOS4412).
>
> + If in doubt, say N.
> +
> config ARM_EXYNOS5250_CPUFREQ
> - def_bool SOC_EXYNOS5250
> + bool "SAMSUNG EXYNOS5250"
> + depends on SOC_EXYNOS5250
> + default y
> + select ARM_EXYNOS_CPUFREQ
> help
> This adds the CPUFreq driver for Samsung EXYNOS5250
> SoC.
>
> + If in doubt, say N.
> +
> config ARM_EXYNOS5440_CPUFREQ
> - def_bool SOC_EXYNOS5440
> + bool "SAMSUNG EXYNOS5440"
> + depends on SOC_EXYNOS5440
> depends on HAVE_CLK && PM_OPP && OF
> + default y
> select CPU_FREQ_TABLE
> help
> This adds the CPUFreq driver for Samsung EXYNOS5440
> @@ -55,6 +65,8 @@ config ARM_EXYNOS5440_CPUFREQ
> different than previous exynos controllers so not using
> the common exynos framework.
>
> + If in doubt, say N.
> +
> config ARM_HIGHBANK_CPUFREQ
> tristate "Calxeda Highbank-based"
> depends on ARCH_HIGHBANK
> Index: b/drivers/cpufreq/exynos-cpufreq.c
> ===================================================================
> --- a/drivers/cpufreq/exynos-cpufreq.c 2013-08-08 14:36:09.000000000
> +0200 +++ b/drivers/cpufreq/exynos-cpufreq.c 2013-08-08
> 15:47:39.619423270 +0200 @@ -332,7 +332,6 @@ err_cpufreq:
> regulator_put(arm_regulator);
> err_vdd_arm:
> kfree(exynos_info);
> - pr_debug("%s: failed initialization\n", __func__);
> return -EINVAL;
> }
> late_initcall(exynos_cpufreq_init);
> Index: b/drivers/cpufreq/exynos-cpufreq.h
> ===================================================================
> --- a/drivers/cpufreq/exynos-cpufreq.h 2013-08-08 14:28:57.000000000
> +0200 +++ b/drivers/cpufreq/exynos-cpufreq.h 2013-08-08
> 15:47:39.619423270 +0200 @@ -43,6 +43,27 @@ struct exynos_dvfs_info {
> bool (*need_apll_change)(unsigned int, unsigned int);
> };
>
> +#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
> extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
> +#else
> +static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif
> +#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
> extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
> +#else
> +static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif
> +#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
> extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
> +#else
> +static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif
>
Finally someone cleaned this up. Thanks.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
next prev parent reply other threads:[~2013-08-09 15:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-09 12:04 [PATCH] cpufreq: fix EXYNOS drivers selection Bartlomiej Zolnierkiewicz
2013-08-09 15:50 ` Tomasz Figa [this message]
2013-08-12 5:39 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=76454119.W9pKpoo1U1@amdc1227 \
--to=t.figa@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cpufreq@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox