[GIT PULL] thermal drivers for v6.15-rc1

[Daniel Lezcano <daniel.lezcano@linaro.org>]

Hi Rafael,

please consider the following changes since commit 
c3b659b74541f4564f9f5a39f65e625c47e77e21:

   Merge branches 'thermal-core' and 'thermal-misc' (2025-03-24 14:09:38 
+0100)

are available in the Git repository at:

  
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git 
tags/thermal-v6.15-rc1

for you to fetch changes up to 1b4ef46fd6660712afcfdd841eadd928193e850f:

   thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data 
(2025-03-25 20:52:04 +0100)

----------------------------------------------------------------
- Used dev_err_probe() helpers to simplify the init code in the Qoriq
   driver (Frank Li)

- Powered down the Qoriq's TMU at suspend time (Alice Guo)

- Added ipq5332, ipq5424 compatible for the QCom's tsens driver and
   TSENS enable / calibration support for V2 (Praveenkumar I)

- Added missing rk3328 mapping entry (Trevor Woerner)

- Removed duplicate struct declaration in the thermal core header
   (Xueqin Luo)

- Disabled the monitoring mode during suspend for the LVTS Mediatek
   driver to prevent temperature acquisition glitches (Nícolas
   F. R. A. Prado)

- Disabled Stage 3 thermal threshold on the LVTS Mediatek driver
   because it disables the suspend ability and does have an not
   interrupt handler (Nícolas F. R. A. Prado)

- Fixed low temperature offset interrupt on the LVTS Mediatek driver
   to prevent multiple interrupts when the system is at its normal
   functionning temperature (Nícolas F. R. A. Prado)

- Enable the interrupts on the LVTS Mediatek driver only on used
   sensors (Nícolas F. R. A. Prado)

- Added the BCM74110 compatible DT binding and the corresponding code
   to support the chip with a different process (Florian Fainelli)

- Corrected indentation and style in DTS example (Krzysztof Kozlowski)

- Unified hexadecimal annotatation in the rcar_gen3 driver (Niklas
   Söderlund)

- Factored out the code logic to read the fuse on the on Gen3 and Gen4
   drivers (Niklas Söderlund)

- Dropped unused driver data on the QCom's spmi temperature alarm
   driver (Johan Hovold)

----------------------------------------------------------------
Alice Guo (1):
       thermal/drivers/qoriq: Power down TMU on system suspend

Florian Fainelli (2):
       dt-bindings: thermal: Update for BCM74110
       thermal/drivers/brcmstb_thermal: Add support for BCM74110

Frank Li (1):
       thermal/drivers/qoriq: Use dev_err_probe() simplify the code

Johan Hovold (1):
       thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data

Krzysztof Kozlowski (1):
       dt-bindings: thermal: Correct indentation and style in DTS example

Niklas Söderlund (2):
       thermal: rcar_gen3: Use lowercase hex constants
       thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4

Nícolas F. R. A. Prado (5):
       thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
       thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
       thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum 
threshold
       thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
       thermal/drivers/mediatek/lvts: Only update IRQ enable for valid 
sensors

Praveenkumar I (2):
       dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
       thermal/drivers/tsens: Add TSENS enable and calibration support 
for V2

Trevor Woerner (1):
       thermal/drivers/rockchip: Add missing rk3328 mapping entry

xueqin Luo (1):
       thermal: core: Remove duplicate struct declaration

  .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml |  48 +++---
  .../devicetree/bindings/thermal/brcm,avs-tmon.yaml |   1 +
  .../devicetree/bindings/thermal/imx-thermal.yaml   |  40 ++---
  .../bindings/thermal/imx8mm-thermal.yaml           |   8 +-
  .../devicetree/bindings/thermal/qcom-tsens.yaml    |  18 +++
  drivers/thermal/broadcom/brcmstb_thermal.c         |  11 +-
  drivers/thermal/mediatek/lvts_thermal.c            | 103 ++++++++----
  drivers/thermal/qcom/qcom-spmi-temp-alarm.c        |   1 -
  drivers/thermal/qcom/tsens-v2.c                    | 178 
+++++++++++++++++++++
  drivers/thermal/qcom/tsens.c                       |   8 +-
  drivers/thermal/qcom/tsens.h                       |   3 +
  drivers/thermal/qoriq_thermal.c                    |  47 +++---
  drivers/thermal/renesas/rcar_gen3_thermal.c        | 107 ++++++-------
  drivers/thermal/rockchip_thermal.c                 |   1 +
  include/linux/thermal.h                            |   2 -
  15 files changed, 409 insertions(+), 167 deletions(-)


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog