From: Mario Limonciello <superm1@kernel.org>
To: Matthew Leach <matthew.leach@collabora.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Pavel Machek <pavel@kernel.org>, Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
YoungJun Park <youngjun.park@lge.com>,
kernel@collabora.com
Subject: Re: [PATCH v2] PM: hibernate: call preallocate_image after freeze prepare
Date: Thu, 26 Mar 2026 08:09:59 -0500 [thread overview]
Message-ID: <8b982cba-be6f-46ad-9a97-87be30280696@kernel.org> (raw)
In-Reply-To: <20260326-hibernation-fixes-v2-1-f6707d82b7b9@collabora.com>
On 3/26/26 06:36, Matthew Leach wrote:
> [You don't often get email from matthew.leach@collabora.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Certain drivers release resources (pinned pages, etc.) into system
> memory during the prepare freeze PM op, making them swappable.
> Currently, hibernate_preallocate_memory is called before prepare freeze,
> so those drivers have no opportunity to release resources first. If a
> driver is holding a large amount of unswappable system RAM, this can
> cause hibernate_preallocate_memory to fail.
>
> Move the call to hibernate_preallocate_memory after prepare freeze.
> According to the documentation for the prepare callback, devices should
> be left in a usable state, so storage drivers should still be able to
> service I/O requests. This allows drivers to release unswappable
> resources prior to preallocation, so they can be swapped out through
> hibernate_preallocate_memory's reclaim path. Also remove
> shrink_shmem_memory since hibernate_preallocate_memory will have
> reclaimed enough memory for the hibernation image.
>
> Signed-off-by: Matthew Leach <matthew.leach@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
> ---
> Changes in v2:
> - Removed shrink_shmem_memory.
> - Fixed missing call to dpm_prepare in error path.
> - Link to v1: https://lore.kernel.org/r/20260321-hibernation-fixes-v1-1-5fe9637b6ff9@collabora.com
> ---
> kernel/power/hibernate.c | 46 +++++++++-------------------------------------
> 1 file changed, 9 insertions(+), 37 deletions(-)
>
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index af8d07bafe02..39b0a8ea4024 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -392,23 +392,6 @@ static int create_image(int platform_mode)
> return error;
> }
>
> -static void shrink_shmem_memory(void)
> -{
> - struct sysinfo info;
> - unsigned long nr_shmem_pages, nr_freed_pages;
> -
> - si_meminfo(&info);
> - nr_shmem_pages = info.sharedram; /* current page count used for shmem */
> - /*
> - * The intent is to reclaim all shmem pages. Though shrink_all_memory() can
> - * only reclaim about half of them, it's enough for creating the hibernation
> - * image.
> - */
> - nr_freed_pages = shrink_all_memory(nr_shmem_pages);
> - pr_debug("requested to reclaim %lu shmem pages, actually freed %lu pages\n",
> - nr_shmem_pages, nr_freed_pages);
> -}
> -
> /**
> * hibernation_snapshot - Quiesce devices and create a hibernation image.
> * @platform_mode: If set, use platform driver to prepare for the transition.
> @@ -425,14 +408,9 @@ int hibernation_snapshot(int platform_mode)
> if (error)
> goto Close;
>
> - /* Preallocate image memory before shutting down devices. */
> - error = hibernate_preallocate_memory();
> - if (error)
> - goto Close;
> -
> error = freeze_kernel_threads();
> if (error)
> - goto Cleanup;
> + goto Close;
>
> if (hibernation_test(TEST_FREEZER)) {
>
> @@ -441,23 +419,17 @@ int hibernation_snapshot(int platform_mode)
> * successful freezer test.
> */
> freezer_test_done = true;
> - goto Thaw;
> + goto ThawKThreads;
> }
>
> error = dpm_prepare(PMSG_FREEZE);
> - if (error) {
> - dpm_complete(PMSG_RECOVER);
> + if (error)
> goto Thaw;
> - }
>
> - /*
> - * Device drivers may move lots of data to shmem in dpm_prepare(). The shmem
> - * pages will use lots of system memory, causing hibernation image creation
> - * fail due to insufficient free memory.
> - * This call is to force flush the shmem pages to swap disk and reclaim
> - * the system memory so that image creation can succeed.
> - */
> - shrink_shmem_memory();
> + /* Preallocate image memory before shutting down devices. */
> + error = hibernate_preallocate_memory();
> + if (error)
> + goto Thaw;
>
> console_suspend_all();
> pm_restrict_gfp_mask();
> @@ -493,9 +465,9 @@ int hibernation_snapshot(int platform_mode)
> return error;
>
> Thaw:
> + dpm_complete(PMSG_RECOVER);
> + ThawKThreads:
> thaw_kernel_threads();
> - Cleanup:
> - swsusp_free();
> goto Close;
> }
>
>
> ---
> base-commit: f338e77383789c0cae23ca3d48adcc5e9e137e3c
> change-id: 20260321-hibernation-fixes-69bca2ee5b65
>
> Best regards,
> --
> Matt
>
next prev parent reply other threads:[~2026-03-26 13:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-26 11:36 [PATCH v2] PM: hibernate: call preallocate_image after freeze prepare Matthew Leach
2026-03-26 13:09 ` Mario Limonciello [this message]
2026-03-31 12:45 ` Rafael J. Wysocki
2026-04-01 10:13 ` Matthew Leach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8b982cba-be6f-46ad-9a97-87be30280696@kernel.org \
--to=superm1@kernel.org \
--cc=kernel@collabora.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthew.leach@collabora.com \
--cc=pavel@kernel.org \
--cc=rafael@kernel.org \
--cc=youngjun.park@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox