Re: [PATCH v3 2/8] Documentation: amd-pstate: add EPP profiles introduction

["Limonciello, Mario" <mario.limonciello@amd.com>]

On 11/7/2022 11:56, Perry Yuan wrote:
> The patch add AMD pstate EPP feature introduction and what EPP
> preference supported for AMD processors.
> 
> User can get supported list from
> energy_performance_available_preferences attribute file, or update
> current profile to energy_performance_preference file
> 
> 1) See all EPP profiles
> $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences
> default performance balance_performance balance_power power
> 
> 2) Check current EPP profile
> $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference
> performance
> 
> 3) Set new EPP profile
> $ sudo bash -c "echo power > /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference"
> 
> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
> ---
>   Documentation/admin-guide/pm/amd-pstate.rst | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
> index 8f3d30c5a0d8..78c6525d5a49 100644
> --- a/Documentation/admin-guide/pm/amd-pstate.rst
> +++ b/Documentation/admin-guide/pm/amd-pstate.rst
> @@ -262,6 +262,25 @@ lowest non-linear performance in `AMD CPPC Performance Capability
>   <perf_cap_>`_.)
>   This attribute is read-only.
>   > +``energy_performance_available_preferences``
> +
> +All the supported EPP preference could be selected, List of the strings that
> +can be set to the ``energy_performance_preference`` attribute
> +those different profiles represent different energy vs efficiency hints provided
> +to low-level firmware
> +however, the ``default`` represents the epp value is set by platform firmware
> +This attribute is read-only.

My proposal at rewording it.

A list of all the supported EPP preferences that could be used for 
``energy_performance_preference` on this system.
These profiles represent different hints that are provided
to the low-level firmware about the user's desired energy vs efficiency 
tradeoff.  ``default`` represents the epp value is set by platform 
firmware. This attribute is read-only.


> +
> +``energy_performance_preference``
> +
> +The current energy performance preference can be read from this attribute.
> +and user can change current preference according to energy or performance needs
> +Please get all support profiles list from
> +``energy_performance_available_preferences`` attribute, all the profiles are
> +integer values defined between 0 to 255 when EPP feature is enabled by platform
> +firmware, if EPP feature is disabled, driver will ignore the written value
> +This attribute is read-write.
> +
>   Other performance and frequency values can be read back from
>   ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
>