From mboxrd@z Thu Jan 1 00:00:00 1970 From: Quentin Schulz Subject: Re: [PATCH v2 02/11] mfd: axp20x: add volatile and writeable reg ranges for VBUS power supply driver Date: Mon, 19 Dec 2016 13:28:11 +0100 Message-ID: <98fa2460-b7fe-3a0b-5b93-7a2e4e6e83ce@free-electrons.com> References: <20161209110419.28981-1-quentin.schulz@free-electrons.com> <20161209110419.28981-3-quentin.schulz@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: Received: from mail.free-electrons.com ([62.4.15.54]:43363 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751192AbcLSM2Q (ORCPT ); Mon, 19 Dec 2016 07:28:16 -0500 In-Reply-To: Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Chen-Yu Tsai Cc: Sebastian Reichel , Rob Herring , Mark Rutland , Russell King , Maxime Ripard , Lee Jones , "open list:THERMAL" , devicetree , linux-kernel , linux-arm-kernel , Thomas Petazzoni Hi Chen-Yu, On 14/12/2016 16:43, Chen-Yu Tsai wrote: > On Fri, Dec 9, 2016 at 7:04 PM, Quentin Schulz > wrote: >> The X-Powers AXP20X and AXP22X PMICs allow to choose the maximum voltage >> and minimum current delivered by the VBUS power supply. >> >> This adds the register used by the VBUS power supply driver to the range >> of volatile and writeable regs ranges. >> >> Signed-off-by: Quentin Schulz >> --- >> >> added in v2 >> >> drivers/mfd/axp20x.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >> index ba130be..6ee2cc6 100644 >> --- a/drivers/mfd/axp20x.c >> +++ b/drivers/mfd/axp20x.c >> @@ -65,12 +65,14 @@ static const struct regmap_access_table axp152_volatile_table = { >> >> static const struct regmap_range axp20x_writeable_ranges[] = { >> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), >> + regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT), > > This is already covered by the previous entry. > >> regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), >> regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)), >> }; >> >> static const struct regmap_range axp20x_volatile_ranges[] = { >> regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS), >> + regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT), > > And I'm not sure why you specify it as volatile? The PMIC doesn't change any > of the bits in this register on its own. > I got things mixed up between the work on the battery driver I'll soon send (which actually needs updated reg ranges) and this VBUS driver. Sorry for that. > Same for the AXP22x bits. So basically I think you don't need this patch. > Indeed. Should I send a v3 to remove this patch or is it fine for you to ignore this one? Thanks! Quentin -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com