messages from 2020-12-10 10:14:21 to 2020-12-15 21:44:38 UTC [more...]
[PATCH] power: supply: PCHG: Peripheral device charger
2020-12-15 21:43 UTC (4+ messages)
` [PATCH 1/2] "
` [PATCH 2/2] mfd: cros_ec: Add peripheral "
[PATCH v2 0/4] cppc_cpufreq: fix, clarify and improve support
2020-12-15 18:21 UTC (7+ messages)
` [PATCH v2 1/4] cppc_cpufreq: use policy->cpu as driver of frequency setting
` [PATCH v2 2/4] cppc_cpufreq: clarify support for coordination types
` [PATCH v2 3/4] cppc_cpufreq: expose information on frequency domains
` [PATCH v2 4/4] cppc_cpufreq: replace per-cpu data array with a list
[PATCH 1/5] thermal/core: Emit a warning if the thermal zone is updated without ops
2020-12-15 18:17 UTC (13+ messages)
` [PATCH 2/5] thermal/core: Add critical and hot ops
` [thermal: thermal/next] "
` [PATCH 3/5] thermal/drivers/acpi: Use hot and critical ops
` [PATCH 4/5] thermal/drivers/rcar: Remove notification usage
` [thermal: thermal/next] "
` [PATCH 5/5] thermal/core: Remove notify ops
` [thermal: thermal/next] thermal/core: Emit a warning if the thermal zone is updated without ops
[thermal: thermal/next] thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
2020-12-15 18:17 UTC
[PATCH v2] ACPI: processor: fix NONE coordination for domain mapping failure
2020-12-15 18:12 UTC (2+ messages)
[GIT PULL] Power management updates for v5.11-rc1
2020-12-15 17:43 UTC
[PATCH v1 0/4] cpufreq: Allow drivers to receive more information from the governor
2020-12-15 15:38 UTC (21+ messages)
` [PATCH v1 2/4] cpufreq: schedutil: Adjust utilization instead of frequency
` [PATCH v1 3/4] cpufreq: Add special-purpose fast-switching callback for drivers
` [PATCH v2 0/3] cpufreq: Allow drivers to receive more information from the governor
` [PATCH v2 1/3] cpufreq: schedutil: Add util to struct sg_cpu
` [PATCH v2 2/3] cpufreq: Add special-purpose fast-switching callback for drivers
` [PATCH v2 3/3] cpufreq: intel_pstate: Implement the ->adjust_perf() callback
[PATCH 1/4] thermal/core: Rename passive_delay and polling_delay with units
2020-12-15 14:38 UTC (3+ messages)
` [PATCH 2/4] thermal/core: Precompute the jiffies
[PATCH 1/3] thermal: core: Add indication for userspace usage
2020-12-15 12:49 UTC (3+ messages)
[RFC V2 0/2] cpufreq: cppc: Add support for frequency invariance
2020-12-15 11:16 UTC (3+ messages)
` [RFC V2 1/2] topology: Allow multiple entities to provide sched_freq_tick() callback
` [RFC V2 2/2] cpufreq: cppc: Add support for frequency invariance
[pm:bleeding-edge] BUILD SUCCESS 08e85a810cae7e70eae555a109236dd8f8730593
2020-12-15 7:41 UTC
pm/testing baseline: 75 runs, 2 regressions (v5.10-rc7-148-g08e85a810cae)
2020-12-15 2:33 UTC
pm/testing build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc7-148-g08e85a810cae)
2020-12-15 1:49 UTC
[PATCH] power: supply: ds2780: Switch to using the new API kobj_to_dev()
2020-12-15 1:00 UTC
[PATCH 1/6] thermal/core: Remove the 'forced_passive' option
2020-12-14 23:38 UTC (6+ messages)
` [PATCH 2/6] thermal/core: Remove unused functions rebind/unbind exception
` [PATCH 3/6] thermal/core: Remove pointless test with the THERMAL_TRIPS_NONE macro
` [PATCH 4/6] acpi/drivers/thermal: Remove TRIPS_NONE cooling device binding
` [PATCH 5/6] thermal/core: Remove THERMAL_TRIPS_NONE test
` [PATCH 6/6] thermal/core: Remove unused macro THERMAL_TRIPS_NONE
[GIT PULL] OPP updates for 5.11
2020-12-14 19:36 UTC (2+ messages)
[GIT PULL] cpufreq/arm updates for 5.11
2020-12-14 19:36 UTC (2+ messages)
[PATCH v4 0/5] Thermal devfreq cooling improvements with Energy Model
2020-12-14 14:40 UTC (14+ messages)
` [PATCH v4 1/5] thermal: devfreq_cooling: change tracing function and arguments
` [thermal: thermal/next] "
` [PATCH v4 2/5] thermal: devfreq_cooling: use a copy of device status
` [thermal: thermal/next] "
` [PATCH v4 3/5] thermal: devfreq_cooling: add new registration functions with Energy Model
` [thermal: thermal/next] "
` [PATCH v4 4/5] thermal: devfreq_cooling: remove old power model and use EM
` [thermal: thermal/next] "
` [PATCH v4 5/5] drm/panfrost: Register devfreq cooling and attempt to add Energy Model
` [thermal: thermal/next] "
[RFC PATCH 0/4] Add processor to the ignore PSD override list
2020-12-14 14:25 UTC (12+ messages)
` [RFC PATCH 2/4] cpufreq: acpi-cpufreq: "
[PATCH -next] power/supply/bq24190_charger: convert comma to semicolon
2020-12-14 13:40 UTC
[PATCH -next] power: supply: ab8500_fg: convert comma to semicolon
2020-12-14 13:40 UTC
[PATCH v5 0/3] BPi M2 Zero poweroff support via new regulator-poweroff driver
2020-12-14 11:46 UTC (10+ messages)
` [PATCH v5 1/3] power: reset: new driver regulator-poweroff
` [PATCH v5 2/3] Documentation: DT: binding documentation for regulator-poweroff
` [PATCH v5 3/3] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node
[PATCH] thermal: da9062/61: fix platform_get_irq.cocci warnings
2020-12-14 10:03 UTC (2+ messages)
[PATCH v4 2/6] cpufreq: sun50i: add a100 cpufreq support
2020-12-14 0:51 UTC (2+ messages)
[PATCH v4 1/6] cpufreq: sun50i: add efuse_xlate to get efuse version
2020-12-14 0:46 UTC (2+ messages)
[PATCH v2 0/2] Modify bitmap_set_value() to suppress compiler warning
2020-12-13 14:55 UTC (4+ messages)
` [PATCH v2 1/2] bitmap: Modify bitmap_set_value() to check bitmap length
` [PATCH v2 2/2] gpio: xilinx: Add extra check if sum of widths exceed 64
[PATCH AUTOSEL 5.9 28/39] intel_idle: Fix intel_idle() vs tracing
2020-12-13 14:11 UTC (3+ messages)
[PATCH] thermal/core: Make 'forced_passive' as obsolete candidate
2020-12-13 11:02 UTC (8+ messages)
[PATCH v3 0/7] Improve s0ix flows for systems i219LM
2020-12-13 8:33 UTC (10+ messages)
[PATCH] power: supply: Fix a typo in warning message
2020-12-13 0:04 UTC (2+ messages)
[PATCH 0/5] power: supply: ab8500 charger cleanup
2020-12-12 23:40 UTC (7+ messages)
` [PATCH 1/5] power: supply: ab8500: Use local helper
` [PATCH 2/5] power: supply: ab8500: Convert to dev_pm_ops
` [PATCH 3/5] power: supply: ab8500_charger: Oneshot threaded IRQs
` [PATCH 4/5] power: supply: ab8500_fg: Request all IRQs as threaded
` [PATCH 5/5] power: supply: ab8500: Use dev_err_probe() for IIO channels
[pm:bleeding-edge] BUILD SUCCESS 97756044ce0645570f22b356174ed0c811458ca7
2020-12-12 7:12 UTC
[PATCH 0/4] Modify bitmap_set_value() to suppress compiler warning
2020-12-12 9:39 UTC (4+ messages)
` [RESEND PATCH 3/4] gpio: xilinx: Modify bitmap_set_value() calls
[PATCH v3 0/7] Add initial support for ATC260x PMICs
2020-12-11 14:17 UTC (8+ messages)
` [PATCH v3 1/7] dt-bindings: input: Add reset-time-sec common property
` [PATCH v3 2/7] dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding
pm/testing sleep: 6 runs, 1 regressions (v5.10-rc7-106-g97756044ce06)
2020-12-12 0:57 UTC
pm/testing baseline: 106 runs, 1 regressions (v5.10-rc7-106-g97756044ce06)
2020-12-12 0:42 UTC
pm/testing build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc7-106-g97756044ce06)
2020-12-11 23:58 UTC
[PATCH 0/2] Add processor to the ignore PSD override list
2020-12-11 23:36 UTC (5+ messages)
` [PATCH 1/2] cpufreq: acpi-cpufreq: Re-factor overriding ACPI PSD
` [PATCH 2/2] cpufreq: acpi-cpufreq: Add processor to the ignore PSD override list
[PATCH v5 0/4] powercap/dtpm: Add the DTPM framework
2020-12-11 19:15 UTC (3+ messages)
[GIT PULL] devfreq next for v5.11
2020-12-11 18:24 UTC (2+ messages)
[PATCH 01/18] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
2020-12-11 15:51 UTC (25+ messages)
` [PATCH 02/18] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
` [PATCH 03/18] ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
` [PATCH 04/18] ARM: dts: exynos: correct MUIC "
` [PATCH 05/18] ARM: dts: exynos: correct PMIC "
` [PATCH 06/18] ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
` [PATCH 07/18] ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
` [PATCH 08/18] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
` [PATCH 09/18] ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
` [PATCH 10/18] ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
` [PATCH 11/18] ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
` [PATCH 12/18] ARM: dts: qcom: msm8974-samsung-klte: "
` [RFC 13/18] mfd: max77686: Do not enforce (incorrect) interrupt trigger type
` [RFC 14/18] rtc: "
` [RFC 15/18] mfd: max77693: "
` [RFC 16/18] power: supply: max17042: "
` [RFC 17/18] mfd: max14577: "
` [RFC 18/18] power: supply: max17040: "
[PATCH V2 2/2] reset: brcm-pmb: add driver for Broadcom's PMB
2020-12-11 11:34 UTC
[thermal: thermal/next] platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
2020-12-11 13:09 UTC
[PATCH 1/4] thermal: int340x: processor_thermal: Refactor MMIO interface
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH 3/4] thermal: int340x: processor_thermal: Add RFIM driver
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH 1/3] dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH 3/3] thermal: rcar_gen3_thermal: Add r8a779a0 support
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[thermal: thermal/next] platform/x86/drivers/acerhdf: Check the interval value when it is set
2020-12-11 13:09 UTC
[PATCH 2/4] thermal: int340x: processor_thermal: Add AlderLake PCI device id
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH 4/4] thermal: int340x: processor_thermal: Add mailbox driver
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH -next] thermal: intel: pch: use macro for temperature calculation
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH -next] thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
2020-12-11 13:09 UTC (4+ messages)
` [thermal: thermal/next] "
[PATCH] thermal: int340x: processor_thermal: Correct workload type name
2020-12-11 13:09 UTC (2+ messages)
` [thermal: thermal/next] "
[PATCH v3 7/7] Input: Add "inhibited" property
2020-12-11 8:31 UTC (10+ messages)
` [PATCH v4 0/7] Support inhibiting input devices
` [PATCH v4 2/7] Input: use input_device_enabled()
` [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
[pm:bleeding-edge] BUILD SUCCESS 58dfa0fa290bb4c04c0dc3838b5cbce2caec7775
2020-12-11 6:53 UTC
[PATCH v4 0/3] BPi M2 Zero poweroff support via new regulator-poweroff driver
2020-12-11 3:06 UTC (3+ messages)
` [PATCH v4 2/3] Documentation: DT: binding documentation for regulator-poweroff
[PATCH v9] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver
2020-12-11 2:52 UTC (3+ messages)
` [PATCH v9 2/2] dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
pm/testing baseline: 117 runs, 4 regressions (v5.10-rc7-88-g58dfa0fa290bb)
2020-12-10 21:26 UTC
pm/testing sleep: 5 runs, 1 regressions (v5.10-rc7-88-g58dfa0fa290bb)
2020-12-10 21:41 UTC
pm/testing build: 7 builds: 0 failed, 7 passed, 3 warnings (v5.10-rc7-88-g58dfa0fa290bb)
2020-12-10 20:42 UTC
[PATCH v3 0/3] BPi M2 Zero poweroff support via new regulator-poweroff driver
2020-12-10 14:30 UTC (5+ messages)
` [PATCH v3 2/3] Documentation: DT: binding documentation for regulator-poweroff
[PATCH 1/2] acpi: cppc: add cpufreq device
2020-12-10 18:54 UTC (8+ messages)
` [PATCH 2/2] cpufreq: cppc: convert to a platform driver
[PATCH v4] PM: domains: create debugfs nodes when adding power domains
2020-12-10 18:51 UTC (3+ messages)
[PATCH v2 1/4] thermal/core: Rename passive_delay and polling_delay with units
2020-12-10 16:25 UTC (9+ messages)
` [PATCH v2 2/4] thermal/core: Precompute the delays from msecs to jiffies
` [PATCH v2 3/4] thermal/core: Use precomputed jiffies for the polling
` [PATCH v2 4/4] thermal/core: Remove ms based delay fields
[PATCH v3 0/5] Thermal devfreq cooling improvements with Energy Model
2020-12-10 13:27 UTC (3+ messages)
[PATCH v3 0/6] imx8mq: updates for the interconnect fabric
2020-12-10 10:09 UTC (2+ messages)
` [PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).