messages from 2023-06-22 12:32:55 to 2023-06-26 13:50:53 UTC [more...]
[PATCH] OPP: Properly propagate error along when failing to get icc_path
2023-06-26 13:46 UTC
[PATCH v2 00/26] ARM: qcom: apq8064: support CPU frequency scaling
2023-06-26 13:44 UTC (39+ messages)
` [PATCH v2 01/26] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
` [PATCH v2 02/26] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
` [PATCH v2 03/26] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
` [PATCH v2 04/26] dt-bindings: clock: qcom,krait-cc: Krait core clock controller
` [PATCH v2 05/26] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms
` [PATCH v2 06/26] interconnect: icc-clk: add support for scaling using OPP
` [PATCH v2 07/26] clk: qcom: krait-cc: rewrite driver to use clk_hw instead of clk
` [PATCH v2 08/26] soc: qcom: spm: add support for voltage regulator
` [PATCH v2 09/26] cpufreq: qcom-nvmem: create L2 cache device
` [PATCH v2 10/26] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
` [PATCH v2 11/26] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
` [PATCH v2 12/26] cpufreq: qcom-nvmem: provide separate configuration data for apq8064
` [PATCH v2 13/26] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
` [PATCH v2 14/26] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
` [PATCH v2 15/26] ARM: dts: qcom: apq8064: declare SAW2 regulators
` [PATCH v2 16/26] ARM: dts: qcom: apq8064: add L2 cache scaling
` [PATCH v2 17/26] ARM: dts: qcom: apq8064: add simple CPUFreq support
` [PATCH v2 18/26] ARM: dts: qcom: apq8064: provide voltage scaling tables
` [PATCH v2 19/26] ARM: dts: qcom: apq8064: enable passive CPU cooling
` [PATCH v2 20/26] ARM: dts: qcom: apq8064-asus-nexus7-flo: constraint cpufreq regulators
` [PATCH v2 21/26] ARM: dts: qcom: apq8064-ifc6410: "
` [PATCH v2 22/26] ARM: dts: qcom: msm8960: declare SAW2 regulators
` [PATCH v2 23/26] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
` [PATCH v2 24/26] ARM: dts: qcom: msm8974: "
` [PATCH v2 25/26] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
` [PATCH v2 26/26] ARM: dts: qcom: ipq8064: "
[PATCH] thermal/drivers/sun8i: remove unneeded comments
2023-06-26 12:55 UTC
[PATCH 1/6] drivers/thermal/k3: Convert to devm_platform_ioremap_resource()
2023-06-26 12:43 UTC (6+ messages)
` [PATCH 2/6] thermal/drivers/k3_j72xx_bandgap: "
` [PATCH 3/6] thermal/drivers/qcom: "
` [PATCH 4/6] drivers/thermal/rcar_gen3_thermal: "
` [PATCH 5/6] thermal/drivers/rcar: "
` [PATCH 6/6] drivers/thermal/ti-soc-thermal: Use devm_platform_get_and_ioremap_resource()
[PATCH] thermal/drivers/qcom/temp-alarm: Use dev_err_probe
2023-06-26 11:20 UTC (3+ messages)
[PATCH v2 0/3] MM8013 fg driver
2023-06-26 10:32 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add Mitsumi Electric Co., Ltd
` [PATCH v2 2/3] dt-bindings: power: supply: Document Mitsumi MM8013 fuel gauge
` [PATCH v2 3/3] power: supply: Introduce MM8013 fuel gauge driver
[PATCH v6 0/2] power: domain: handle power supplies that need interrupts
2023-06-26 9:50 UTC (11+ messages)
` [PATCH v6 1/2] power: domain: handle genpd correctly when needing interrupts
fix the name_to_dev_t mess v2
2023-06-26 7:53 UTC (4+ messages)
` [PATCH 08/24] init: pass root_device_name explicitly
[PATCH V3] thermal/core/power_allocator: avoid thermal cdev can not be reset
2023-06-26 7:45 UTC (14+ messages)
` [PATCH V4] thermal/core/power_allocator: reset thermal governor when trip point is changed
[PATCH 0/2] Add provision to keep idle state disabled
2023-06-26 6:44 UTC (7+ messages)
[PATCH] OPP: Use dev_err_probe() when failing to get icc_path
2023-06-26 6:40 UTC (2+ messages)
[PATCH] cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
2023-06-26 6:40 UTC (3+ messages)
[PATCH] PM: QoS: Restore support for default value on frequency QoS
2023-06-26 3:51 UTC
[PATCH 0/8] Finish thermal zone structure encapsulation
2023-06-25 20:29 UTC (6+ messages)
` [PATCH 4/8] thermal/core: Update the generic trip points
[PATCH v4 00/24] sched: Introduce classes of tasks for load balance
2023-06-25 20:23 UTC (13+ messages)
` [PATCH v4 06/24] sched/fair: Collect load-balancing stats for IPC classes
` [PATCH v4 07/24] sched/fair: Compute IPC class scores for load balancing
` [PATCH v4 10/24] sched/fair: Use IPCC scores to select a busiest runqueue
` [PATCH v4 18/24] sched/task_struct: Add helpers for IPC classification
[PATCH] e1000e: Use PME poll to circumvent unreliable ACPI wake
2023-06-25 6:28 UTC (2+ messages)
` [Intel-wired-lan] "
[PATCH v2 00/45] Add support for sam9x7 SoC family
2023-06-24 9:19 UTC (82+ messages)
` [PATCH v2 01/45] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 compatible
` [PATCH v2 02/45] dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible
` [PATCH v2 03/45] dt-bindings: usb: generic-ehci: Document clock-names property
` [PATCH v2 04/45] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface
` [PATCH v2 05/45] ARM: at91: pm: add support for sam9x7 SoC family
` [PATCH v2 06/45] ARM: at91: pm: add sam9x7 SoC init config
` [PATCH v2 07/45] ARM: at91: add support in SoC driver for new sam9x7
` [PATCH v2 08/45] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
` [PATCH v2 09/45] clk: at91: sam9x7: add support for HW PLL freq dividers
` [PATCH v2 10/45] clk: at91: sama7g5: move mux table macros to header file
` [PATCH v2 11/45] dt-bindings: clk: at91: add bindings for SAM9X7's clock controller
` [PATCH v2 12/45] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 binding
` [PATCH v2 13/45] dt-bindings: atmel-sysreg: add bindings for sam9x7
` [PATCH v2 14/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel AES
` [PATCH v2 15/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel SHA
` [PATCH v2 16/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel TDES
` [PATCH v2 17/45] dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7
` [PATCH v2 18/45] dt-bindings: i2c: at91: Add SAM9X7 compatible string
` [PATCH v2 19/45] dt-bindings: mfd: "
` [PATCH v2 20/45] dt-bindings: atmel-gpbr: add microchip,sam9x7-gpbr
` [PATCH v2 21/45] dt-bindings: atmel-matrix: add microchip,sam9x7-matrix
` [PATCH v2 22/45] dt-bindings: atmel-smc: add microchip,sam9x7-smc
` [PATCH v2 23/45] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
` [PATCH v2 24/45] dt-bindings: sdhci-of-at91: add microchip,sam9x7-sdhci
` [PATCH v2 25/45] dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
` [PATCH v2 26/45] dt-bindings: pinctrl: at91: add bindings for SAM9X7
` [PATCH v2 27/45] dt-bindings: rng: atmel,at91-trng: document sam9x7 TRNG
` [PATCH v2 28/45] dt-bindings: rtc: at91rm9200: add sam9x7 compatible
` [PATCH v2 29/45] dt-bindings: rtt: at91rm9260: "
` [PATCH v2 30/45] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7
` [PATCH v2 31/45] dt-bindings: atmel-classd: add sam9x7 compatible
` [PATCH v2 32/45] spi: dt-bindings: atmel,at91rm9200-spi: "
` [PATCH v2 33/45] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x7
` [PATCH v2 34/45] dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
` [PATCH v2 35/45] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
` [PATCH v2 36/45] clk: at91: sam9x7: add sam9x7 pmc driver
` [PATCH v2 37/45] irqchip/atmel-aic5: Add support for sam9x7 aic
` [PATCH v2 38/45] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
` [PATCH v2 39/45] power: reset: at91-reset: add reset support for sam9x7 SoC
` [PATCH v2 40/45] power: reset: at91-reset: add sdhwc "
` [PATCH v2 41/45] ARM: at91: Kconfig: add config flag for SAM9X7 SoC
` [PATCH v2 42/45] ARM: configs: at91: enable config flags for sam9x7 SoC family
` [PATCH v2 43/45] ARM: dts: at91: sam9x7: add device tree for SoC
` [PATCH v2 44/45] dt-bindings: arm: add sam9x75 curiosity board
` [PATCH v2 45/45] ARM: dts: at91: sam9x75_curiosity: add device tree for "
` (subset) [PATCH v2 00/45] Add support for sam9x7 SoC family
[PATCH V2 0/7] ARM: dts: bcm283x: Improve device-trees and bindings
2023-06-23 21:00 UTC (8+ messages)
` [PATCH V2 1/7] ARM: dts: bcm283x: Fix pinctrl groups
` [PATCH V2 3/7] ARM: dts: bcm2835: adjust DMA node names
` [PATCH V2 5/7] ARM: dts: bcm283x: Increase pwm-cells
` (subset) [PATCH V2 0/7] ARM: dts: bcm283x: Improve device-trees and bindings
pm/testing baseline: 54 runs, 5 regressions (v6.4-rc7-126-gf28ec6369334)
2023-06-23 20:07 UTC
[PATCH v2 0/4] interconnect: qcom: rpmh: sm8550: mask to send as vote
2023-06-23 20:07 UTC (11+ messages)
` [PATCH v2 1/4] interconnect: qcom: Add support for mask-based BCMs
` [PATCH v2 2/4] interconnect: qcom: sm8450: add enable_mask for bcm nodes
` [PATCH v2 3/4] interconnect: qcom: sm8550: "
` [PATCH v2 4/4] interconnect: qcom: sa8775p: "
pm/testing build: 8 builds: 0 failed, 8 passed, 7 warnings (v6.4-rc7-126-gf28ec6369334)
2023-06-23 19:24 UTC
[Bug 217589] New: Intel CPU maximum boost frequency reduced after resume from suspend to RAM
2023-06-23 17:58 UTC (8+ messages)
` [Bug 217589] "
[PATCH 1/1] thermal: sysfs: avoid actual readings from sysfs
2023-06-23 17:31 UTC (10+ messages)
[PATCH 0/7] thermal: enhancements on thermal stats
2023-06-23 16:40 UTC (5+ messages)
` [PATCH 5/7] thermal: stats: introduce tz time in trip
[PATCH] arm64: Provide an AMU-based version of arch_freq_get_on_cpu
2023-06-23 14:33 UTC (4+ messages)
Fwd: High cpu usage caused by kernel process when upgraded to linux 5.19.17 or later
2023-06-23 1:26 UTC (2+ messages)
` "
[PATCH] PM: hibernate: don't store zero pages in the image file
2023-06-22 16:22 UTC (3+ messages)
` [PATCH v4] "
[PATCH 11/14] init: consolidate prototypes in linux/init.h
2023-06-22 15:02 UTC (2+ messages)
fix the name_to_dev_t mess
2023-06-22 14:57 UTC (9+ messages)
` [PATCH 14/24] init: clear root_wait on all invalid root= strings
[PATCH v3 0/3] x86/speculation: Disable IBRS when idle
2023-06-22 13:08 UTC (9+ messages)
` [PATCH v3 2/3] intel_idle: Sync up the SPEC_CTRL MSR value to x86_spec_ctrl_current
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).