Re: [PATCH] tools/power turbostat: Fix Bzy_MHz calculation equation

[Peng Liu <pngliu@hotmail.com>]

Hi Doug,

Thanks for your information. I wonder whether a submitter will be notified if his/her patch is not accepted. Can I assume that my patch is accepted if no reply is received?

Regards,
Peng

On 2023/11/2 23:31, Doug Smythies wrote:
> Hi Peng and Wyes,
>
> Just for your information about your recent "ping"s about your turbostat patches:
>
> Please be aware that there is rarely any reply. There tends to be about 2 turbostat updates released per year. Your patches are in patchworks [1], as are some others, including an old one of mine from 2023.04.03
> Eventually there will be an update, and hopefully it will include all our patches.
>
> [1] https://patchwork.kernel.org/project/linux-pm/list/?series=&submitter=&state=&q=&archive=&delegate=107
>
> ... Doug
>
> On 2023.10.29 08:12 Peng Liu wrote:
>
>> Ping
>>
>> On 2023/10/7 13:46, Peng Liu wrote:
>>> From: Peng Liu <liupeng17@lenovo.com>
>>>
>>> To calculate Bzy_MHz, TSC_delta should multiply APERF_delta instead
>>> of dividing it.
>>>
>>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>>> ---
>>>    tools/power/x86/turbostat/turbostat.8 | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
>>> index 8f08c3fd498d..1ba6340d3b3d 100644
>>> --- a/tools/power/x86/turbostat/turbostat.8
>>> +++ b/tools/power/x86/turbostat/turbostat.8
>>> @@ -370,7 +370,7 @@ below the processor's base frequency.
>>>    
>>>    Busy% = MPERF_delta/TSC_delta
>>>    
>>> -Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
>>> +Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
>>>    
>>>    Note that these calculations depend on TSC_delta, so they
>>>    are not reliable during intervals when TSC_MHz is not running at the base frequency.