linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Georgi Djakov <djakov@kernel.org>, Leo Yan <leo.yan@linaro.org>,
	Evan Green <evgreen@chromium.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Marijn Suijten <marijn.suijten@somainline.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: Re: [PATCH v4 19/22] interconnect: qcom: icc-rpm: Fix bucket number
Date: Tue, 13 Jun 2023 22:06:40 +0200	[thread overview]
Message-ID: <ZIjMUAvt3vEnYtfe@gerhold.net> (raw)
In-Reply-To: <20230526-topic-smd_icc-v4-19-5ba82b6fbba2@linaro.org>

On Tue, Jun 13, 2023 at 04:03:19PM +0200, Konrad Dybcio wrote:
> SMD RPM only provides two buckets, one each for the active-only and
> active-sleep RPM contexts. Use the correct constant to allocate and
> operate on them.
> 
> This will make the qcom,icc.h header no longer work with this driver,
> mostly because.. it was never meant to! The commit that introduced
> bucket support to SMD RPM was trying to shove a square into a round
> hole and it did not work out very well. That said, there are no
> active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.
> 
> Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  drivers/interconnect/qcom/icc-rpm.c | 16 ++++++++--------
>  drivers/interconnect/qcom/icc-rpm.h |  6 +++---
>  2 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
> index f9d0ecba5631..01e14b8ced64 100644
> --- a/drivers/interconnect/qcom/icc-rpm.c
> +++ b/drivers/interconnect/qcom/icc-rpm.c
> @@ -249,7 +249,7 @@ static void qcom_icc_pre_bw_aggregate(struct icc_node *node)
>  	size_t i;
>  
>  	qn = node->data;
> -	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> +	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
>  		qn->sum_avg[i] = 0;
>  		qn->max_peak[i] = 0;
>  	}
> @@ -273,9 +273,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
>  	qn = node->data;
>  
>  	if (!tag)
> -		tag = QCOM_ICC_TAG_ALWAYS;
> +		tag = RPM_ALWAYS_TAG;
>  
> -	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> +	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
>  		if (tag & BIT(i)) {
>  			qn->sum_avg[i] += avg_bw;
>  			qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
> @@ -300,11 +300,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
>  {
>  	struct icc_node *node;
>  	struct qcom_icc_node *qn;
> -	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
> +	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
>  	int i;
>  
>  	/* Initialise aggregate values */
> -	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> +	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
>  		agg_avg[i] = 0;
>  		agg_peak[i] = 0;
>  	}
> @@ -317,7 +317,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
>  	 */
>  	list_for_each_entry(node, &provider->nodes, node_list) {
>  		qn = node->data;
> -		for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
> +		for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
>  			if (qn->channels)
>  				sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
>  			else
> @@ -328,7 +328,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
>  	}
>  
>  	/* Find maximum values across all buckets */
> -	for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++)
> +	for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++)
>  		*max_agg_avg = max_t(u64, *max_agg_avg, agg_avg[i]);
>  }
>  
> @@ -339,7 +339,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
>  	struct icc_provider *provider;
>  	u64 sum_bw;
>  	u64 active_rate, sleep_rate;
> -	u64 agg_avg[QCOM_ICC_NUM_BUCKETS], agg_peak[QCOM_ICC_NUM_BUCKETS];
> +	u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
>  	u64 max_agg_avg;
>  	int ret;
>  
> diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
> index a4588a3aebf3..fe928ab6b878 100644
> --- a/drivers/interconnect/qcom/icc-rpm.h
> +++ b/drivers/interconnect/qcom/icc-rpm.h
> @@ -10,7 +10,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/soc/qcom/smd-rpm.h>
>  
> -#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,rpm-icc.h>
>  
>  #define RPM_BUS_MASTER_REQ	0x73616d62
>  #define RPM_BUS_SLAVE_REQ	0x766c7362
> @@ -105,8 +105,8 @@ struct qcom_icc_node {
>  	u16 num_links;
>  	u16 channels;
>  	u16 buswidth;
> -	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
> -	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
> +	u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
> +	u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
>  	int mas_rpm_id;
>  	int slv_rpm_id;
>  	struct qcom_icc_qos qos;
> 
> -- 
> 2.41.0
> 

  reply	other threads:[~2023-06-13 20:06 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-13 14:03 [PATCH v4 00/22] Restructure RPM SMD ICC Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 02/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 03/22] soc: qcom: smd-rpm: Use tabs for defines Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 06/22] interconnect: qcom: icc-rpm: Introduce keep_alive Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 07/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code Konrad Dybcio
2023-06-13 20:10   ` Stephan Gerhold
2023-06-13 22:41     ` Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 09/22] interconnect: qcom: Add missing headers in icc-rpm.h Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 10/22] interconnect: qcom: Define RPM bus clocks Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 12/22] interconnect: qcom: msm8996: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 13/22] interconnect: qcom: qcs404: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 14/22] interconnect: qcom: msm8939: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 15/22] interconnect: qcom: msm8916: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 16/22] interconnect: qcom: qcm2290: " Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc Konrad Dybcio
2023-06-13 20:36   ` Stephan Gerhold
2023-06-13 20:39     ` Stephan Gerhold
2023-06-13 22:40     ` Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 19/22] interconnect: qcom: icc-rpm: Fix bucket number Konrad Dybcio
2023-06-13 20:06   ` Stephan Gerhold [this message]
2023-06-13 14:03 ` [PATCH v4 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req Konrad Dybcio
2023-06-13 14:03 ` [PATCH v4 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZIjMUAvt3vEnYtfe@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=djakov@kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leo.yan@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).