From: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
To: Mario Limonciello <superm1@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>, Perry Yuan <perry.yuan@amd.com>,
"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
<x86@kernel.org>, "Rafael J . Wysocki" <rafael@kernel.org>,
"open list:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
<linux-kernel@vger.kernel.org>,
"open list:ACPI" <linux-acpi@vger.kernel.org>,
"open list:CPU FREQUENCY SCALING FRAMEWORK"
<linux-pm@vger.kernel.org>,
Mario Limonciello <mario.limonciello@amd.com>
Subject: Re: [PATCH 4/8] x86/amd: Move amd_get_highest_perf() out of amd-pstate
Date: Tue, 27 Aug 2024 20:31:15 +0530 [thread overview]
Message-ID: <Zs3qOxud6Ny7nCcH@BLRRASHENOY1.amd.com> (raw)
In-Reply-To: <20240826211358.2694603-5-superm1@kernel.org>
On Mon, Aug 26, 2024 at 04:13:54PM -0500, Mario Limonciello wrote:
> From: Mario Limonciello <mario.limonciello@amd.com>
>
> amd_get_highest_perf() is a helper used to get the highest perf
Nit: amd_pstate_get_highest_perf() is the existing helper, that is
being moved to the cppc handling code and being renamed as
amd_get_highest_perf().
> value on AMD systems. It's used in amd-pstate as part of preferred
> core handling, but applicable for acpi-cpufreq as well.
>
> Move it out to cppc handling code.
Otherwise, looks good to me.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
--
Thanks and Regards
gautham.
>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> arch/x86/kernel/acpi/cppc.c | 30 ++++++++++++++++++++++++++++++
> drivers/cpufreq/amd-pstate.c | 34 ++--------------------------------
> include/acpi/cppc_acpi.h | 2 ++
> 3 files changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
> index e94507110ca24..5a6c01a1b0d95 100644
> --- a/arch/x86/kernel/acpi/cppc.c
> +++ b/arch/x86/kernel/acpi/cppc.c
> @@ -119,6 +119,36 @@ void init_freq_invariance_cppc(void)
> mutex_unlock(&freq_invariance_lock);
> }
>
> +/*
> + * Get the highest performance register value.
> + * @cpu: CPU from which to get highest performance.
> + * @highest_perf: Return address for highest performance value.
> + *
> + * Return: 0 for success, negative error code otherwise.
> + */
> +int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf)
> +{
> + u64 val;
> + int ret;
> +
> + if (cpu_feature_enabled(X86_FEATURE_CPPC)) {
> + ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &val);
> + if (ret)
> + goto out;
> +
> + val = AMD_CPPC_HIGHEST_PERF(val);
> + } else {
> + ret = cppc_get_highest_perf(cpu, &val);
> + if (ret)
> + goto out;
> + }
> +
> + WRITE_ONCE(*highest_perf, (u32)val);
> +out:
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(amd_get_highest_perf);
> +
> /**
> * amd_get_boost_ratio_numerator: Get the numerator to use for boost ratio calculation
> * @cpu: CPU to get numerator for.
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 89bda7a2bb8d1..f470b5700db58 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -803,36 +803,6 @@ static void amd_pstste_sched_prefcore_workfn(struct work_struct *work)
> }
> static DECLARE_WORK(sched_prefcore_work, amd_pstste_sched_prefcore_workfn);
>
> -/*
> - * Get the highest performance register value.
> - * @cpu: CPU from which to get highest performance.
> - * @highest_perf: Return address.
> - *
> - * Return: 0 for success, -EIO otherwise.
> - */
> -static int amd_pstate_get_highest_perf(int cpu, u32 *highest_perf)
> -{
> - int ret;
> -
> - if (cpu_feature_enabled(X86_FEATURE_CPPC)) {
> - u64 cap1;
> -
> - ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1);
> - if (ret)
> - return ret;
> - WRITE_ONCE(*highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
> - } else {
> - u64 cppc_highest_perf;
> -
> - ret = cppc_get_highest_perf(cpu, &cppc_highest_perf);
> - if (ret)
> - return ret;
> - WRITE_ONCE(*highest_perf, cppc_highest_perf);
> - }
> -
> - return (ret);
> -}
> -
> #define CPPC_MAX_PERF U8_MAX
>
> static void amd_pstate_init_prefcore(struct amd_cpudata *cpudata)
> @@ -840,7 +810,7 @@ static void amd_pstate_init_prefcore(struct amd_cpudata *cpudata)
> int ret, prio;
> u32 highest_perf;
>
> - ret = amd_pstate_get_highest_perf(cpudata->cpu, &highest_perf);
> + ret = amd_get_highest_perf(cpudata->cpu, &highest_perf);
> if (ret)
> return;
>
> @@ -879,7 +849,7 @@ static void amd_pstate_update_limits(unsigned int cpu)
> if ((!amd_pstate_prefcore) || (!cpudata->hw_prefcore))
> goto free_cpufreq_put;
>
> - ret = amd_pstate_get_highest_perf(cpu, &cur_high);
> + ret = amd_get_highest_perf(cpu, &cur_high);
> if (ret)
> goto free_cpufreq_put;
>
> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
> index f25a881cd46dd..2246ce0630362 100644
> --- a/include/acpi/cppc_acpi.h
> +++ b/include/acpi/cppc_acpi.h
> @@ -137,8 +137,10 @@ struct cppc_cpudata {
> };
>
> #ifdef CONFIG_CPU_SUP_AMD
> +extern int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf);
> extern int amd_get_boost_ratio_numerator(unsigned int cpu, u64 *numerator);
> #else /* !CONFIG_CPU_SUP_AMD */
> +static inline int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf) { return -ENODEV; }
> static inline int amd_get_boost_ratio_numerator(unsigned int cpu, u64 *numerator) { return -ENODEV; }
> #endif /* !CONFIG_CPU_SUP_AMD */
>
> --
> 2.43.0
>
next prev parent reply other threads:[~2024-08-27 15:01 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-26 21:13 [PATCH 0/8] Adjustments for preferred core detection Mario Limonciello
2024-08-26 21:13 ` [PATCH 1/8] x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c Mario Limonciello
2024-08-27 6:29 ` Yuan, Perry
2024-08-27 14:08 ` Gautham R. Shenoy
2024-08-28 5:23 ` kernel test robot
2024-08-26 21:13 ` [PATCH 2/8] x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator() Mario Limonciello
2024-08-27 14:42 ` Gautham R. Shenoy
2024-08-27 18:18 ` Mario Limonciello
2024-08-28 9:09 ` kernel test robot
2024-08-26 21:13 ` [PATCH 3/8] ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn Mario Limonciello
2024-08-27 6:37 ` Yuan, Perry
2024-08-27 14:50 ` Gautham R. Shenoy
2024-08-27 18:48 ` Mario Limonciello
2024-08-26 21:13 ` [PATCH 4/8] x86/amd: Move amd_get_highest_perf() out of amd-pstate Mario Limonciello
2024-08-27 6:46 ` Yuan, Perry
2024-08-27 15:01 ` Gautham R. Shenoy [this message]
2024-08-26 21:13 ` [PATCH 5/8] x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator() Mario Limonciello
2024-08-27 15:43 ` Gautham R. Shenoy
2024-08-27 19:00 ` Mario Limonciello
2024-08-26 21:13 ` [PATCH 6/8] cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator() Mario Limonciello
2024-08-27 16:52 ` Gautham R. Shenoy
2024-08-27 18:36 ` Mario Limonciello
2024-08-28 5:59 ` Gautham R. Shenoy
2024-08-27 21:31 ` kernel test robot
2024-08-26 21:13 ` [PATCH 7/8] cpufreq: amd-pstate: Optimize amd_pstate_update_limits() Mario Limonciello
2024-08-27 6:48 ` Yuan, Perry
2024-08-27 16:57 ` Gautham R. Shenoy
2024-08-27 19:02 ` Mario Limonciello
2024-08-26 21:13 ` [PATCH 8/8] cpufreq: amd-pstate: Drop some uses of cpudata->hw_prefcore Mario Limonciello
2024-08-27 6:53 ` Yuan, Perry
2024-08-27 17:03 ` Gautham R. Shenoy
2024-08-27 19:16 ` Mario Limonciello
2024-08-28 5:08 ` Gautham R. Shenoy
2024-08-28 6:20 ` Andrea Righi
2024-08-28 14:57 ` Gautham R. Shenoy
2024-08-29 12:52 ` Andrea Righi
2024-08-29 13:01 ` Mario Limonciello
2024-08-29 15:16 ` Andrea Righi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zs3qOxud6Ny7nCcH@BLRRASHENOY1.amd.com \
--to=gautham.shenoy@amd.com \
--cc=bp@alien8.de \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=perry.yuan@amd.com \
--cc=rafael@kernel.org \
--cc=superm1@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).