Re: [PATCH v3] cpufreq: Avoid using inconsistent policy->min and policy->max

[Christian Loehle <christian.loehle@arm.com>]

On 4/16/25 15:12, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Since cpufreq_driver_resolve_freq() can run in parallel with
> cpufreq_set_policy() and there is no synchronization between them,
> the former may access policy->min and policy->max while the latter
> is updating them and it may see intermediate values of them due
> to the way the update is carried out.  Also the compiler is free
> to apply any optimizations it wants both to the stores in
> cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
> which may result in additional inconsistencies.
> 
> To address this, use WRITE_ONCE() when updating policy->min and
> policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
> them in cpufreq_driver_resolve_freq().  Moreover, rearrange the update
> in cpufreq_set_policy() to avoid storing intermediate values in
> policy->min and policy->max with the help of the observation that
> their new values are expected to be properly ordered upfront.
> 
> Also modify cpufreq_driver_resolve_freq() to take the possible reverse
> ordering of policy->min and policy->max, which may happen depending on
> the ordering of operations when this function and cpufreq_set_policy()
> run concurrently, into account by always honoring the max when it
> turns out to be less than the min (in case it comes from thermal
> throttling or similar).
> 
> Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Reviewed-by: Christian Loehle <christian.loehle@arm.com>

> ---
> 
> This replaces the last 3 patches in
> 
> https://lore.kernel.org/linux-pm/6171293.lOV4Wx5bFT@rjwysocki.net/
> 
> v2 -> v3:
>    * Fold 3 patches into one.
>    * Drop an unrelated white space fixup change.
>    * Fix a typo in a comment (Christian).
> 
> v1 -> v2: Cosmetic changes
> 
> ---
>  drivers/cpufreq/cpufreq.c |   32 +++++++++++++++++++++++++-------
>  1 file changed, 25 insertions(+), 7 deletions(-)
> 
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -495,8 +495,6 @@
>  {
>  	unsigned int idx;
>  
> -	target_freq = clamp_val(target_freq, policy->min, policy->max);
> -
>  	if (!policy->freq_table)
>  		return target_freq;
>  
> @@ -520,7 +518,22 @@
>  unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
>  					 unsigned int target_freq)
>  {
> -	return __resolve_freq(policy, target_freq, CPUFREQ_RELATION_LE);
> +	unsigned int min = READ_ONCE(policy->min);
> +	unsigned int max = READ_ONCE(policy->max);
> +
> +	/*
> +	 * If this function runs in parallel with cpufreq_set_policy(), it may
> +	 * read policy->min before the update and policy->max after the update
> +	 * or the other way around, so there is no ordering guarantee.
> +	 *
> +	 * Resolve this by always honoring the max (in case it comes from
> +	 * thermal throttling or similar).
> +	 */
> +	if (unlikely(min > max))
> +		min = max;
> +
> +	return __resolve_freq(policy, clamp_val(target_freq, min, max),
> +			      CPUFREQ_RELATION_LE);
>  }
>  EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
>  
> @@ -2338,6 +2351,7 @@
>  	if (cpufreq_disabled())
>  		return -ENODEV;
>  
> +	target_freq = clamp_val(target_freq, policy->min, policy->max);
>  	target_freq = __resolve_freq(policy, target_freq, relation);
>  
>  	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
> @@ -2631,11 +2645,15 @@
>  	 * Resolve policy min/max to available frequencies. It ensures
>  	 * no frequency resolution will neither overshoot the requested maximum
>  	 * nor undershoot the requested minimum.
> +	 *
> +	 * Avoid storing intermediate values in policy->max or policy->min and
> +	 * compiler optimizations around them because they may be accessed
> +	 * concurrently by cpufreq_driver_resolve_freq() during the update.
>  	 */
> -	policy->min = new_data.min;
> -	policy->max = new_data.max;
> -	policy->min = __resolve_freq(policy, policy->min, CPUFREQ_RELATION_L);
> -	policy->max = __resolve_freq(policy, policy->max, CPUFREQ_RELATION_H);
> +	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max, CPUFREQ_RELATION_H));
> +	new_data.min = __resolve_freq(policy, new_data.min, CPUFREQ_RELATION_L);
> +	WRITE_ONCE(policy->min, new_data.min > policy->max ? policy->max : new_data.min);
> +
>  	trace_cpu_frequency_limits(policy);
>  
>  	cpufreq_update_pressure(policy);
> 
> 
>