From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Fan Wu <fanwu01@zju.edu.cn>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
myungjoo.ham@samsung.com, stable@vger.kernel.org
Subject: Re: [PATCH] power: supply: charger-manager: tear down sysfs and disable charging before freeing regulators
Date: Sun, 26 Jul 2026 22:07:37 +0200 [thread overview]
Message-ID: <amZoF1JtJKEKUE9p@venus> (raw)
In-Reply-To: <20260726051540.35579-1-fanwu01@zju.edu.cn>
[-- Attachment #1: Type: text/plain, Size: 3561 bytes --]
Hi,
On Sun, Jul 26, 2026 at 05:15:40AM +0000, Fan Wu wrote:
> charger_manager_remove() and the err_reg_extcon probe error path call
> regulator_put() before tearing down the power_supply sysfs entries
> (power_supply_unregister()). charger_manager_remove() also calls
> try_charger_enable(cm, false) after the regulator_put() loop. A concurrent
> write to a charger's externally_control sysfs attribute that lands between
> regulator_put() and power_supply_unregister() can run
> charger_externally_control_store() and call try_charger_enable(), which,
> when charging is enabled, dereferences the already-freed consumer handle
> via regulator_enable(), regulator_disable(), regulator_is_enabled() and
> regulator_force_disable(). When charging is enabled, try_charger_enable(cm,
> false) in .remove() also dereferences the freed handles directly. Both
> leave use-after-free windows.
>
> Move power_supply_unregister() ahead of the regulator_put() loop on both
> paths. It ends in device_unregister(), which removes the sysfs attribute
> groups and drains active kernfs operations, so on return no
> externally_control store can be running or start again; it does not touch
> the regulator consumers, and psy->desc references the devm-managed
> cm->charger_psy_desc, which outlives the call. Move try_charger_enable(cm,
> false) before the regulator_put() loop in .remove() as well, so the
> synchronous disable also runs on valid handles.
>
> This does not address the separate extcon-notifier path, which needs its
> own synchronization design.
>
> Found by an in-house static analysis tool.
>
> Fixes: 3950c7865cd7 ("charger-manager: Add support sysfs entry for charger")
> Cc: stable@vger.kernel.org
> Assisted-by: Codex:gpt-5.6
> Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
> ---
If the power-supply unregister needs to happen before the regulator
unregister, the regulator also needs to be registered before the
power-supply device to avoid early userspace access to the sysfs
files before the regulator is registered. I.e. this patch should
also move the charger_manager_register_extcon() call.
Greetings,
-- Sebastian
> drivers/power/supply/charger-manager.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
> index c49e0e4d02f7..c1df512f32a8 100644
> --- a/drivers/power/supply/charger-manager.c
> +++ b/drivers/power/supply/charger-manager.c
> @@ -1622,11 +1622,11 @@ static int charger_manager_probe(struct platform_device *pdev)
> return 0;
>
> err_reg_extcon:
> + power_supply_unregister(cm->charger_psy);
> +
> for (i = 0; i < desc->num_charger_regulators; i++)
> regulator_put(desc->charger_regulators[i].consumer);
>
> - power_supply_unregister(cm->charger_psy);
> -
> return ret;
> }
>
> @@ -1644,12 +1644,12 @@ static void charger_manager_remove(struct platform_device *pdev)
> cancel_work_sync(&setup_polling);
> cancel_delayed_work_sync(&cm_monitor_work);
>
> - for (i = 0 ; i < desc->num_charger_regulators ; i++)
> - regulator_put(desc->charger_regulators[i].consumer);
> + try_charger_enable(cm, false);
>
> power_supply_unregister(cm->charger_psy);
>
> - try_charger_enable(cm, false);
> + for (i = 0 ; i < desc->num_charger_regulators ; i++)
> + regulator_put(desc->charger_regulators[i].consumer);
> }
>
> static const struct platform_device_id charger_manager_id[] = {
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2026-07-26 20:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-26 5:15 [PATCH] power: supply: charger-manager: tear down sysfs and disable charging before freeing regulators Fan Wu
2026-07-26 20:07 ` Sebastian Reichel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amZoF1JtJKEKUE9p@venus \
--to=sebastian.reichel@collabora.com \
--cc=fanwu01@zju.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox