From: Hans de Goede <hdegoede@redhat.com>
To: Marek Vasut <marex@denx.de>, linux-pm@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: Re: [PATCH v2] power: supply: bq25890: Add support for setting IINLIM
Date: Mon, 1 Aug 2022 09:15:51 +0200 [thread overview]
Message-ID: <b8235890-7878-c982-caf2-1c7a69859f69@redhat.com> (raw)
In-Reply-To: <20220801025727.778218-1-marex@denx.de>
Hi,
On 8/1/22 04:57, Marek Vasut wrote:
> Let user set input current limit via sysfs. This is useful in case there
> are multiple chargers connected to the device, each of which with its own
> arbitrary maximum current which it can provide, some of which may provide
> more than the default 500mA. In that case, userspace can listen for plug
> events generated by each charger and adjust the current limit accordingly,
> e.g. to permit battery to charge faster.
>
> Note that the IINLIM is reset every time the bq25890 is disconnected from
> a charger, so the userspace must adjust the limit repeatly on every plug
> event.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> ---
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
> To: linux-pm@vger.kernel.org
> ---
> V2: Use bq25890_find_idx(val->intval, F_IINLIM) instead of ad-hoc division
> ---
> drivers/power/supply/bq25890_charger.c | 29 ++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
> index 131ec7d882fe9..892609f9dd250 100644
> --- a/drivers/power/supply/bq25890_charger.c
> +++ b/drivers/power/supply/bq25890_charger.c
> @@ -613,6 +613,33 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
> return 0;
> }
>
> +static int bq25890_power_supply_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct bq25890_device *bq = power_supply_get_drvdata(psy);
> + u8 lval;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + lval = bq25890_find_idx(val->intval, F_IINLIM);
> + return bq25890_field_write(bq, F_IINLIM, lval);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int bq25890_power_supply_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + switch (psp) {
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> static int bq25890_get_chip_state(struct bq25890_device *bq,
> struct bq25890_state *state)
> {
> @@ -837,6 +864,8 @@ static const struct power_supply_desc bq25890_power_supply_desc = {
> .properties = bq25890_power_supply_props,
> .num_properties = ARRAY_SIZE(bq25890_power_supply_props),
> .get_property = bq25890_power_supply_get_property,
> + .set_property = bq25890_power_supply_set_property,
> + .property_is_writeable = bq25890_power_supply_property_is_writeable,
> };
>
> static int bq25890_power_supply_init(struct bq25890_device *bq)
next prev parent reply other threads:[~2022-08-01 7:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-01 2:57 [PATCH v2] power: supply: bq25890: Add support for setting IINLIM Marek Vasut
2022-08-01 7:15 ` Hans de Goede [this message]
2022-08-23 15:59 ` Marek Vasut
2022-09-11 12:43 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8235890-7878-c982-caf2-1c7a69859f69@redhat.com \
--to=hdegoede@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=linux-pm@vger.kernel.org \
--cc=marex@denx.de \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox